Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
366 results · Page 1 of 11
Alabama State Shape
Alabama's tall, boxy outline gets cut clean through the pumpkin so the whole state shines as one bright window, from the straight northern border down to the little Mobile Bay tail at the southwest corner. Most of the perimeter is long straight runs, but that skinny coastal notch is what earns the medium rating; cut the tail last with a fine saw and support it with your free hand so the narrow strip does not tear.
Alaska Mainland and Islands
Alaska's mainland glows as one big cut-through shape, trailed by a sweeping chain of tiny island openings that curl away like the Aleutians and a separate panhandle cluster on the right. The main body carves like any bold silhouette, but the dozens of small island dots push this into expert territory. Drill-start every island with a skewer or small bit and cut them before the large shape so the wall stays rigid.
Alaska Pumpkin Stencil
Alaska's unmistakable outline fills the stencil: the large mainland block with its jagged southeastern panhandle, the scattered Aleutian Island dots strung to the lower left, and the intricately serrated coastline that makes this the most complex state silhouette in the collection. Each island dot and every inlet notch is a separate piece to pierce, giving the lit pumpkin a constellation-like scatter of small glowing holes alongside the main glowing landmass. Cut the main body first, then use a thin detail blade to punch the individual island dots from largest to smallest.
Alien Face Pumpkin Stencil
An alien face with a massive domed cranium, huge almond-shaped eyes with small round irises, a vestigial nose, and thin lips fills the stencil from chin to crown, flanked by flame-like protrusions from the skull. The large dome is carved open, while the eyes are cut as open ovals with small solid iris nubs, and a series of small petal shapes around the chin and cheeks add texture. Lit from inside, the open skull dome blazes brightest and the eye shapes glow along the lower half, giving the face an eerie two-zone lighting effect. To keep the narrow iris nubs centered inside the eye ovals, cut the outer eye shape before removing the interior.
Alien in Asteroid Pumpkin Stencil
A baby alien character sits inside a rough oval asteroid, hugging its knees: the alien's large oval head with dark recessed eyes pokes out the top of the rock, tiny three-fingered hands reach forward, and small star-burst shapes float to either side suggesting space debris. The jagged asteroid rim forms the outer boundary of the cut. Lit from inside, the alien face and hands glow within the rocky frame while the star shapes create a scattered secondary light. Cut the alien face details inside the head first before removing the large asteroid-rim opening, so the head structure is supported during the finer cuts.
Alien Pumpkin Stencil
An extraterrestrial figure with an oversized oval head, large almond-shaped eyes, delicate facial features, and a lean torso covered in fine ribbed line-work fills this expert-level pumpkin stencil. The alien holds up one three-fingered hand in a peace sign, and the entire upper head is decorated with small curved slash marks suggesting brain-like texture. Each fine interior line across the torso and head must be cut precisely to retain the many thin bridges that keep the design from collapsing. Cut the small curved head-texture marks first before any large area is removed, as they rely on a full wall for support.
Almond Eyes and Twenty Tears
Two huge almond eyes stare straight out, each ringed by fanned lash bars above and a spray of teardrop cuts below, with attached pupils floating in the centers. The eye whites, brow strokes, and roughly twenty teardrops are all pierced, leaving the pupils and lash ribs as connected shell. This one earns its hard rating on the thin lash bars, so cut every slot outward from the eye and support the wall with your palm.
Anarchy Symbol Pumpkin Stencil
The classic anarchist circle-A symbol is redrawn with jagged, torn-edge strokes: the central A-frame, the horizontal crossbar, and the enclosing circle are all rendered as rough, splintered shapes that evoke spray-paint or ripped stencil. Each element is a separate cut piece, so when lit the glowing fragments of the circle and letter float against the dark pumpkin wall. Cut the short crossbar piece first since it sits between the two legs of the A and will be the most difficult to free once surrounding cuts are made.
Angled Eyes and Seven Fangs
Two sharply slanted triangle eyes glare above a wide jagged mouth lined with seven pointed fangs, giving this face a classic menacing snarl. Every element is cut fully through, and the zigzag mouth does most of the work, so accuracy there pays off. Cut each tooth as two separate straight strokes meeting at the point instead of dragging the saw around the corner, and the grin stays razor sharp.
Angry Eyes and Five Mouth Gaps
A grumpy jack-o'-lantern scowls with slanted, brow-slit eyes, a small triangle nose, angled cheek slashes, and a downturned mouth broken into square gaps. Every element is cut through, with the mouth's rind bridges creating the clenched, gritted-teeth effect. The thin brow and cheek slits earn the medium rating: make each slit with two close parallel cuts and pop the sliver out from inside the pumpkin, since pushing from outside can crack the narrow channel wider.
Animal Skeleton Pumpkin Stencil
An expert-level animal skeleton pumpkin stencil showing a four-legged creature in profile, likely a large cat or prehistoric predator, with every bone individually rendered: elongated ribcage with many parallel curved ribs, shoulder and hip joints, individual leg bones, and a detailed skull with open jaws. The composition fills the entire pumpkin face diagonally with dozens of separate cut-through bone shapes. Because the ribs are thin parallel strips, cut them from the spine outward rather than across, and leave the connecting spine strip uncut to hold them all in line.
Anxious Round-Pupil Frown
A hilariously worried pumpkin face with two big round eyes topped by drooping eyebrow arcs and a deep upside-down frown. Each feature is a pierced opening, and the round pupils stay attached as tabs inside the glowing eyes to give it that anxious stare. At medium difficulty the pupil bridges are the key detail; cut toward each tab rather than away so you do not snap them off.
Arched Pupils and Twelve Rays
This pumpkin is absolutely thrilled to see you: arched eyes with hanging pupil tabs sit above a giant grin packed with separated square teeth, while short rays burst from each cheek like cartoon sparkle lines. All the shapes cut through, and the many thin bridges between teeth and rays are why it rates hard. Cut the small ray slits first while the wall is strongest, then do the teeth, always sawing away from the narrow bridges.
Arizona State Shape
The unmistakable outline of Arizona is cut clean through the pumpkin wall, with its straight eastern border and the stair-stepped notch along the Colorado River edge on the west. The entire state interior is removed, so it reads as one big glowing block of light. For this easy cutout, trace the jagged western edge in short segments rather than one long cut to keep each little step crisp.
Awareness Ribbon Pumpkin Stencil
An awareness ribbon rendered in clean, rounded-corner shapes: two upper lobes that cross at center and taper to two diamond-pointed tails below. The entire ribbon silhouette is pierced through as three distinct cut pieces, the left lobe, the right lobe, and the lower V-tail, separated by solid pumpkin bridges at the cross-point and the lobe tops. Lit from inside, the ribbon glows as three bright sections with a narrow dark cross at the center. The gap at the ribbon's top center is the most delicate bridge; cut outward from it rather than into it.
Bare Tree with Forked Branches
A gnarled bare tree glows from a wide split trunk up through forked, twisting branches, the classic haunted-forest silhouette in reverse. The entire tree shape is cut through as one connected opening, so light traces every crooked limb. It rates easy because the cuts are bold, but the branch tips narrow quickly; cut from each tip back toward the trunk and remove the waste in small pieces so no limb snaps off.
Barred Eyes and Diamond Dots
A wildly ornate astonished face: two huge round eyes split by vertical bars, a tall oval mouth gaping in shock, and a halo of diamonds, dots, and curved flourishes radiating in every direction. All of it is cut through, from the barred eyes to the smallest accent dot, so the whole pumpkin erupts in patterned light. Rated hard for its piece count, work from the center outward and leave the outer diamonds and dots for the final pass.
Barred Eyes and Four Fangs
Slanted, sinister eyes are crossed by narrow uncut bars that read like glaring pupils, while the sneering mouth bares pointed fangs above and below the grin. The face is all pierced openings, and those slim bridges across the eyes are the make-or-break detail. Cut each eye in sections around its bar rather than in one pass, and save the fang notches for last so the thin points do not snap while you work.
Barred Eyes and Serrated Grin
This wicked traditional face stacks barred triangle eyes with heavy slanted brows above a huge serrated grin, then flanks the mouth with rows of small wedge and diamond accents across both cheeks. Everything is cut through, and the eye bars are thin strips of shell left inside each triangle. Cut on both sides of each eye bar before removing the surrounding pieces, and save the tiny cheek diamonds for last.
Barred Eyes and Ten Grin Slots
A vintage sugar-skull-style face packed with detail: huge round eyes crossed by curved bars, arching brow flourishes, a diamond nose, ten scalloped tooth slots in a wide grin, and comma-shaped swirls framing the cheeks. Everything is cut through, with slim rind bridges holding the eye bars and tooth dividers in place. As an expert pattern, treat those bridges as sacred; cut away from them, never toward them, and remove waste in small pieces.
Barred Eyes, Fourteen Leaves
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.
Barred Triangles and Grid Grin
A grinning classic face where each triangle eye is split by a vertical bar of rind, the diamond nose sits between rows of small diamond cheek cutouts, and the huge smile is divided into a grid of rectangular tooth windows. Everything is pierced through, creating a lantern that flickers from dozens of openings. Rated hard because those rind bars and grid struts are fragile; cut away from each bar and never twist the blade near them.
Baseball Over Crossed Bats
A baseball with curved stitch seams sits front and center over two crossed bats, a classic team-spirit emblem sized for a porch pumpkin. The ball, bats, and stitching are all shaved into the skin rather than pierced, so the emblem glows softly while the pumpkin wall stays whole. On this medium shading piece, shave the bats and ball to one even depth, then cut the stitch lines noticeably deeper so they show as dark laces against the bright ball.
Bent Hat with Nine Sparkles
A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.
Bigfoot Pumpkin Stencil
A full-body Bigfoot figure strides confidently to the right on this hard-difficulty pumpkin stencil, rendered in a chunky outline style with shaggy fur edges, a broad face with heavy brow ridges and small eyes, swinging arms, and large flat feet. The body outline and fur texture gaps are all pierced, while a central vertical strip of skin connects the figure's torso to the pumpkin background on each side. Preserve the narrow fur-edge bridges along the arms by cutting inward from the outer contour rather than slicing along the bridge line itself.
Bridged Peace Sign
A bold peace symbol fills the face of the pumpkin, its glowing ring and spokes formed by cutting away the four wedge-shaped spaces between them. Thin uncut bridges hold the outer ring to the pumpkin wall, which is exactly what makes this a medium carve. Cut each wedge slowly and leave the connecting bridges at least a finger-width wide; if a spoke feels wobbly, shave it thinner from the inside rather than recutting the front.
Broad Autumn Leaf
A single broad maple-style leaf glows from the pumpkin's face, its rounded lobes and short stem cut fully through as one connected opening. The design leans seasonal rather than spooky, making it a lovely choice for fall porches from October through Thanksgiving. As an easy one-piece cutout, just poke transfer dots along the lobed outline, saw slowly around each curve, and push the waste piece out from inside in a single pop.
Broad Cap Mushroom
A single broad-capped mushroom with a sturdy stem glows from the center of the pumpkin in this cozy woodland design. The whole mushroom is removed as one connected cutout, cap and stem together, so there are no fragile bridges to protect. That makes it a great easy project for porch-step decorating; cut the smooth dome of the cap in one continuous pass, then square off the stem base last for a clean silhouette.
Broad Five-Point Star
One broad five-point star fills the front of the pumpkin as a single dramatic cutout. The entire star is pierced through, leaving a clean rim of pumpkin around it, so a candle inside turns the whole shape into a lantern window. As an easy design it is ideal for beginners; draw a guide dot at each of the five points before cutting, then connect them with straight strokes so the star stays symmetrical.
Brows and Six Cheek Dots
A classic jack-o'-lantern face with slanted triangle eyes topped by separate angled brow cuts, a diamond nose, and a wide grin broken by six blocky teeth, plus three small round holes dotting each cheek. Every element is cut fully through so the whole face blazes at night. A solid medium project; drill or punch the cheek dots first while the wall is strongest, then saw the eyes, brows, and mouth.
Calavera Sombrero Pumpkin Stencil
A calavera skull wearing a wide sombrero fills this expert pumpkin stencil: the sombrero brim is ringed with rows of small scallop-cut holes and vertical stripe slots, the crown shows banded tiers, and the skull below has large flower-shaped eye sockets, a heart-shaped nose, a grinning mouth, and curling moustache scrolls on each side. Every decorative element is cut away so candlelight floods through the scallops, stripes, and flower eyes simultaneously, creating an elaborate Day of the Dead glow. Start with the tiny scallop holes along the sombrero brim before any other cut, since those are easiest to control while the surrounding skin is still rigid.
California Pumpkin Stencil
The distinctive outline of California is carved as a single open silhouette in this states pumpkin stencil, its long jagged Pacific coastline on the left and the straighter inland borders on the right clearly recognizable when lit. The narrow northern tip near the Oregon border and the small notch at Lake Tahoe are the two tightest points in the outline; cut those corners with the tip of your blade at a near-vertical angle rather than dragging the knife sideways, which prevents tearing the thin points.
California State Shape
The unmistakable outline of California cut fully through the pumpkin wall, glowing as one tall golden silhouette. The entire state shape is removed while the surrounding rind stays intact to frame it. The long straight eastern border and the jagged coastline meet at narrow angles, so take the coast in short, connected strokes rather than one continuous pull to avoid cracking the point at the southern tip.
Caped Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
Cartoon Crab Pumpkin Stencil
A cartoon crab pumpkin stencil with two large curved pincer claws spread wide on each side, two flame-shaped claws raised overhead, a round body edged with jagged serrations, a circular belly, and small stubby legs at the bottom. The solid crab body and claw shapes remain as orange pumpkin skin while the surrounding background and the gaps between the pincers are cut away, creating a silhouette that glows from the outer edges. Keep the narrow connectors between each claw and the body intact until the final cut so the arms stay anchored.
Cartoon Dog Face Pumpkin Stencil
A cartoon dog face looks straight out in this pumpkin stencil, with two floppy rounded ears, a pair of round nose dots, fur-tuft accents on the cheeks, a wide muzzle shape, and a dangling curved tongue all rendered as separate cut-through pieces against an open face background. The design reads as an expressive puppy portrait when candlelit. Cut the small cheek fur tufts and nostril dots first while the surrounding pumpkin wall is still firm, then open the larger ear and muzzle sections afterward.