Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
212 results · Page 2 of 6
Curled Dolphin Profile
A leaping dolphin caught mid-arc, its curved body, pointed snout, dorsal fin, and sweeping tail all glowing through one sculpted cut-through opening, with an intact rind island shaping the pectoral fin and belly. The interior island is the key feature: cut the outer outline in sections and leave the connecting bridges to the island untouched until the very end, then trim them carefully to final width.
Curved Ball and Two Stars
A giant tennis ball dominates the pumpkin, its two big panels pierced through and separated by the signature curved seam left as an attached band of shell, with a small star cut on either side. The sweeping seam is the make-or-break piece, so cut both panel edges toward the seam rather than across it and keep the band at least a finger wide for strength.
Curved Palm with Five Fronds
A tropical palm tree with a gently curved trunk and five broad fronds fanning from the crown, carved as one connected glowing silhouette. The whole tree is pierced through in a single piece, so the trunk and fronds shine together like an island sunset. This easy design has one caution: the frond tips are the thinnest cuts, so start at the trunk base and work upward, saving the delicate leaf points for your final, gentlest strokes.
Delaware State Shape
Delaware's tall, slender silhouette runs nearly the full height of the pumpkin, from its narrow northern arc down to the curved coastal bulge along Delaware Bay. The entire state shape is a single cut-through opening that lights up as one bright column. Because the shape is tall and thin, cut the long straight western border last so the panel stays supported while you saw out the curvier eastern coastline.
Desert Cactus & Sun
A tall saguaro cactus with two upturned arms stands over small desert dunes while a round sun hangs in the upper corner. The cactus body, sun disc, and low mound shapes are all cut out completely so candlelight pours through the whole scene. Cut the big cactus trunk first, then the sun, and save the thin dune slivers for last so the wall stays sturdy while you work.
Diagonal Football & Five Laces
A football tilts diagonally across the whole face of the pumpkin, its two end panels and center field pierced through while a thin seam line and five lace bars stay attached as shell. Those slender laces are what push this into hard territory, so cut away from each lace bar rather than toward it and leave the bars for last. The glow through the big panels makes the dark laces pop.
Diamond Stingray with Spots
A diamond-bodied stingray glides diagonally across the pumpkin, its spotted back, curled wingtips, eye ridges, and long trailing tail all shaved into the skin with no pierced openings. The spots are left raised while the surrounding body is etched down to glow. Outline the ray first, then shave patiently around each spot; those raised dots are what sell the texture.
Dice and a Toppled Pawn
A dice cup tips over spilling three pip-marked dice across the scene while a toppled game pawn lies nearby in a glowing puddle of lantern light. This shading design is carved entirely by shaving the skin: the cup, dice faces, pawn, and spill area are scraped to different depths while the pip dots stay dark as untouched rind. Rated hard, keep each die's edges square with straight guide cuts before shaving so the cubes stay convincing.
Die and Pawn on Curved Board
A six-sided die and a classic rounded game pawn sit side by side on a curved, segmented game board path. The die faces, pawn silhouette, and board track are shave-carved so they glow in warm relief, with the pips scooped deeper for contrast; nothing pierces the wall. Shade the two big shapes first, then dot in the pips with a small round gouge, keeping each one the same depth so the die reads evenly.
Dimpled Basketball
A full basketball fills the front of the pumpkin, with curved seam lines and hundreds of tiny pebbled dimples shaved into the surface. Nothing is pierced; you peel the skin inside the circle so the ball glows, leaving the seams as raised rind lines. Work the dimples with a small round gouge and keep your depth shallow and even, since patient repetition is what makes this hard design pop.
Dollar Sign Pumpkin Stencil
A bold dollar-sign symbol fills the center of this pumpkin stencil, its curved S-shape and two vertical bar segments carved through entirely so candlelight blazes through the open silhouette. The thick outer outline stays solid, holding the shape firmly on the pumpkin wall. Because the two short horizontal bars at top and bottom are separate cut-outs, cut those small pieces first before tackling the large curved body so the surrounding wall stays supported throughout.
Dolphin above Curling Waves
A dolphin arcs above curling surf, its body, fins, and the rolling wave scrolls all shaved into the pumpkin skin with no pierced holes. Deeper shaving on the belly and wave crests makes those areas glow brightest, while shallow passes keep the outlines crisp. Vary your depth deliberately: the contrast between bright and dim is what gives this relief scene its sense of motion.
Domed Jellyfish and Bubbles
A ribbed jellyfish bell hovers near the top of the pumpkin, trailing eight long wavy tentacles that flow all the way to the base, with small bubbles rising on either side. The bell segments and tentacles are shaved to glowing flesh while thin strips of dark skin separate every ribbon, and the bubbles are pierced through. This expert shading design demands a steady hand; work each tentacle top to bottom in one continuous peel so the curves stay smooth and evenly lit.
Dragonfly with Reeds
A dragonfly hovers with all four veined wings spread wide, its long segmented tail trailing down among slender reed grasses and cattails. The whole scene is shave-carved: wings, body, and reeds glow through thinned skin while the background stays dark, with no pierced holes. The wing veining is the payoff detail, so shave each wing smooth first, then score the vein lines lightly with a knife tip rather than gouging them.
E=MC2 Pumpkin Stencil
Einstein's famous equation is carved as bold block letters spelling E = MC2 across this easy pumpkin stencil, with the superscript "2" rendered in smaller fragments to the upper right of the C. Each letter is a chunky stencil-style cutout with internal bridges holding counter shapes such as the horizontal bars inside the E. The superscript "2" has two small separate island pieces; cut the main letters first and save those two small fragments for last so they don't shift before the surrounding skin is stable.
Eastern Dragon Pumpkin Stencil
A highly detailed Eastern-style dragon in a crouching, four-legged stance fills this expert pumpkin stencil, with a horned and whiskered head, rows of dorsal spines, a scaled underbelly rendered as oval cutouts along the torso, clawed feet, and a coiling tail with a spiral tip. An intricate network of thin bridges holds the isolated scale ovals and spine shapes in place. Work from the outermost tail spiral inward, and cut the tiny dorsal spine gaps only after all larger surrounding areas are removed, so the skin doesn't flex and crack prematurely.
Eiffel Tower Pumpkin Stencil
The Eiffel Tower fills this easy pumpkin stencil as a symmetrical stack of horizontal rectangular cutouts that grow wider toward the base, with a pointed antenna tip at the top, paired diagonal leg sections, and a large arched base opening at the bottom. All the horizontal bars and the arch are pierced through while the thin vertical struts between them remain solid. Work from the antenna tip downward, cutting each horizontal bar in turn, so the struts stay braced by the surrounding uncut skin until the very last base arch is removed.
Eight Curved Basketball Wedges
Eight curved wedge openings radiate from the center of the pumpkin, separated by ribs of shell that mimic the seams of a basketball. The wedges are all cut through, so the pumpkin itself becomes a glowing ball when lit. Keep the seam ribs a consistent width as you saw each wedge, and remove the wedge pieces gently by pushing from inside so the long curved ribs are not stressed.
Eight Teardrops Around Circle
Eight teardrop petals radiate around a central circle cutout, like a glowing daisy or sunburst wheel. Every teardrop and the center are pierced clean through, turning the pumpkin into a lantern that throws petal-shaped light across the porch. Cut the center circle first as your anchor point, then work around the ring, alternating sides so the wall stays balanced as you go.
Eight-Panel Basketball
A big glowing basketball built from one large circle divided by the ball's signature curved seam lines. The eight panel sections are pierced through while the seam lines stay as intact pumpkin ribs, so the whole ball reads instantly once a candle goes in. The medium challenge is keeping those curved ribs even, so cut alternating panels rather than working around the circle in order, which keeps the wall supported as you go.
Eight-Point Star and Diamonds
A large eight point star anchors the center while small diamonds and dots scatter around it like a burst of night sky sparkle. Every shape is a clean cut-through opening, so the pumpkin throws star shaped light across nearby walls and steps. Cut the big star's inner corners with a fine blade and pop the little diamonds out gently to keep their sharp points intact on this medium pattern.
Einstein Portrait Pumpkin Stencil
An Albert Einstein portrait pumpkin stencil rendered in bold linework: wild tufts of windswept hair radiate from both sides, deeply set eyes under heavy brow lines, a rounded nose, and an open mouth with the tongue sticking out. The linework approach leaves the face mostly solid orange with thin cut lines defining the wrinkles, hair tufts, and collar diagonals below, so the finished pumpkin reads as a recognizable portrait even in dim light. Cut the hair tufts from the tips inward toward the head to reduce leverage on those fragile points.
Farm Tractor Pumpkin Stencil
A side-view farm tractor fills this hard-level pumpkin stencil: a large rear wheel with a circular hub and cross-spoke cutouts, a small front wheel with a curved fender, a boxy cab section with cut-out windows, a squared hood, and a vertical exhaust stack. The rear wheel dominates the lower half of the composition and has the most intricate internal detail. Cut the cab windows and exhaust stack openings first while the pumpkin is still fully intact, then work on the large rear wheel spokes last, since removing them will flex the surrounding skin considerably.
Fire Helmet Above Three Flames
A classic firefighter helmet, complete with front shield and wide brim, glows above three dancing flames in this tribute design. The helmet crown, brim, and each flame are separate cut-through openings, with skin bridges keeping the helmet's shield outline dark against the light. At medium difficulty, the flame tips are the fussy part; saw each flame from its wide base up toward the point, and cut the helmet's thin brim opening last when you can support the wall from inside.
Five Curves Around a Dark Sun
Five curved galaxy arms swirl around a solid dark core, each tapered blade cut fully through so the design spins like a glowing cosmic pinwheel, with five small round star holes drilled between the arms. The center circle stays as untouched shell, anchored by the skin between the arms. At medium difficulty, the keys are the tapered arm tips; saw from the wide end of each arm toward its point, and drill the star holes before cutting the arms nearby.
Five Glowing Soccer Panels
A full soccer ball fills the pumpkin's face, with a dark pentagon at its center surrounded by glowing hexagonal panels and a bright outer ring. The panels are shaved down to the flesh rather than pierced, so the seam lines and center pentagon stay as raised skin while the shaved sections glow softly. For this medium shading design, score every seam line first, then peel each panel with a flat gouge, keeping depth even so all the panels light up uniformly.
Flaming Skull Pumpkin Stencil
A compact cartoon skull wearing a crown of jagged flame spikes fills this pumpkin stencil, its round head showing two circular eye sockets, a small curved smile, and a row of three square teeth below, all surrounded by an aggressive ring of pointed flames and lightning-bolt tabs. The flames and most features are pierced-through openings, leaving solid bridges between the skull face and the outer flame ring. Cut the small oval and teardrop-shaped flame scatter pieces at the very top first, then work down through the zigzag flame ring before tackling the skull face openings, to keep the narrow bridges between flames intact as long as possible.
Flask With Three Bubbles
A chunky Erlenmeyer flask with three round bubbles rising from its neck, giving off a mad-scientist potion vibe when lit. The flask body and each floating bubble are cut cleanly through, so the brew appears to glow and fizz after dark. This easy design suits first-time carvers: cut the big flask opening from the bottom up, then punch out the three circles with a small round cut or an apple corer.
Flexed Bicep Emoji Pumpkin Stencil
A muscular arm bent at the elbow in the classic flexed-bicep emoji pose fills this easy emoji pumpkin stencil, with the large upper arm and forearm cut away as open voids and the thin wrist and elbow-crease lines left as pumpkin-skin bridges. The two sections of the arm void are separated by the elbow-crease bridge, which is the slimmest part of the design. Carve the forearm section below the crease first, then remove the upper arm, so the crease bridge is never cut from two sides at once.
Florida State Shape
The unmistakable outline of Florida, panhandle and peninsula together, cut clear through the pumpkin wall as one bold silhouette. Everything inside the state shape is removed so the whole map blazes with candlelight against the untouched shell. Take the coastline in short relief cuts and free the panhandle last; that long thin arm is the only fragile part of an otherwise forgiving carve.
Flying Saucer Pumpkin Stencil
A flying saucer pumpkin stencil with a domed upper hull made of stacked horizontal band segments separated by narrow orange ribs, creating a layered effect that suggests a ringed spacecraft in profile. The bands alternate between cut and solid, so when lit the saucer appears to glow with horizontal light stripes rather than as a flat shape. Cut the widest central band first to anchor your position, then work upward band by band toward the dome, keeping each thin rib intact so the layers do not collapse mid-carve.
Football & Seven Laces
A big textured football fills the pumpkin face, with two end stripes and a center lace strip of seven crossing laces left in pale relief. This is a shading design: the ball's pebbled leather area is shaved to mid-depth while the laces, stripes, and outline are scraped lighter so they pop. At medium difficulty, dab the shaved leather zone with a rounded tool to build that pebble texture, keeping the lace lines crisp and untouched.
Formula Race Car Pumpkin Stencil
A detailed open-wheel formula racing car stretches across the full width of this pumpkin stencil in a low side profile, showing the nose cone, cockpit canopy, front and rear wings, and large exposed tires. The design keeps the car body as solid orange pumpkin wall with the negative space cut away around it, so the lit jack-o-lantern presents the car as an orange silhouette in a dark field. The nose cone and rear wing tips extend to very narrow points, so cut those extremities last once the large background sections have been removed and the remaining wall is light and flexible.
Four Diamonds and Eight Dots
Four diamonds run in a straight column down the front of the pumpkin, flanked by a staggered row of round dots on each side, turning a tall pumpkin into a modern lantern. All twelve openings are cut through, and their regular spacing is what sells the design. Mark the vertical centerline first and measure each diamond's position before cutting, since even spacing matters more here than fancy knife work.
Four Sails Above Three Waves
A pirate ship rides three rolling waves, its mast carrying four billowing sail panels and a small flag snapping at the top. The sails, hull, flag, and waves are all cut through, while the mast and yard lines are strips of rind left between the openings to hold the rigging together. Those mast strips make it a medium carve: cut the four sail windows one at a time, always slicing away from the mast strip so you never lever against it.
Four-Tongue Flame
One big flame fills the face of the pumpkin, its four licking tongues tapering to sharp points just like the classic fire symbol. The entire flame is a single cut-through shape, so candlelight literally becomes the fire. This is an easy carve with only one piece to remove; poke the pattern deeply at each flame tip first, then saw from the rounded base upward so the narrow points come out clean instead of ragged.