Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
318 results · Page 5 of 9
Leaping Dolphin & Two Waves
A dolphin arcs joyfully above two rolling waves, its curved body, dorsal fin, flippers, and smiling beak all drawn in bright shaded lines. The design uses skin-shave shading only, so you scrape away the outer skin along the dolphin and wave shapes while the wall stays solid. At medium difficulty, work the long body curve in one smooth continuous pass before adding the wave lines, which keeps the leap looking fluid.
Lily Flower Pumpkin Stencil
A single lily blossom fills the design with five broad sweeping petals, each separated by thin white lines, and a cluster of slender stamen stalks topped with teardrop anthers at the center. The large petal areas are cut through while the stamen cluster creates a spray of small isolated islands at the heart of the flower. Carve the petals from the outermost tip of each down toward the flower center, then tackle the stamen teardrops last so the surrounding petal wall gives you a stable grip while working on those tiny pieces.
Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
Little Etched Hedgehog
A sweet little hedgehog shown in profile, with a pointed snout, a dot eye, tiny feet, and a back full of spiky quills rendered as star-like bursts. Nothing is pierced; you shave away only the outer skin inside the outline so the pale flesh forms the hedgehog against the dark rind. Use a shallow loop tool and keep an even depth so the quill points stay crisp.
Long Dog with Three Short Feet
A full-body dachshund silhouette trots across the pumpkin, long low back, floppy ear, upturned tail, and short legs all captured in one clean glowing shape. The entire dog is removed as a single cut-through, so light floods the whole outline. This easy design has just one tricky zone: the narrow gaps between the legs. Cut the big body outline first, then carve carefully around each leg so the slim wall strips between them survive.
Long Dog, Bone and Four Ovals
A long-bodied dachshund trots across the pumpkin as one big glowing silhouette, with a dog bone floating above and a row of four oval accents below like little paw steps. The dog, bone, and ovals are all pierced through, so the whole scene lights up brightly with just a handful of cuts. Start with a hole in the dog's belly and saw outward, taking the thin legs and tail slowly so they stay crisp.
Long-Eared Puppy with Curls
An adorable puppy face with two long floppy ears hanging down the sides, big round eyes, a small triangle nose, and a happy curled smile. Each feature is cut fully through, so the whole face beams once it is lit. The ears are the largest openings and the curled smile ends are the finest cuts; start with the small mouth curls while the pumpkin wall is still rigid, then open up the big ear shapes last.
Long-Neck Dinosaur
A friendly long-necked sauropod stands in profile, its arched neck, rounded body, four legs, and tapering tail all glowing as one connected silhouette. Because the entire dinosaur comes out as a single cutout, there are no interior pieces to manage, keeping this an easy favorite for dino-loving kids. Take your time on the skinny neck and tail; saw with gentle strokes and keep a hand braced inside the pumpkin so the narrow curves cut clean.
Long-Necked Cyclops Pumpkin Stencil
A quirky one-eyed long-necked creature with a rounded bird-like body, a spiral cyclops eye, and a jagged toothed mouth stands on two stubby feet in this easy Halloween pumpkin stencil. The body is largely pierced through as a dark void while the eye ring and neck details remain as uncut pumpkin. The thin neck connecting the large head to the body is the most delicate bridge in the design, so carve the body void and the mouth teeth first, then cut around the neck last to keep it from snapping early.
Lovestruck Heart Eyes Face
This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.
Michigan Heart Lettering
A big I, a solid heart, and the letters MI glow in two stacked rows, spelling out hometown pride for the Great Lakes State. Every letter and the heart are cut fully through, with thick serif strokes that hold up well in a real pumpkin wall. It is an easy carve for tailgates and porch season; transfer the letters with a poked outline so the baselines stay level.
Mini Face with Twin Teeth
Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.
Minnesota Heart Lettering
The message reads I, a plump heart, then the letters M and N stacked below, spelling out love for Minnesota in chunky serif lettering. Each letter and the heart are cut fully through, so the whole message glows like a hometown marquee. An easy lettering carve; the only care points are the small rind gaps inside the M and N, so cut each letter's openings before freeing its outer edges.
Moon and Six Diamond Sparkles
A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.
Moon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
Moonlit Seal and Water Bands
A harbor seal rests on the shore with its head raised and tail curled up, backed by a huge full moon, drifting clouds, and bands of rippling water below. The entire scene is skin-shaved shading with no pierced holes, so the moon glows brightest behind the seal's darker sculpted body. Expert carvers should establish the moon's deep, even shave first, then build the seal with shallower graded layers so its whiskered face keeps crisp contrast.
Mortar and Tilted Pestle
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting.
Narwhal, Seven Bubbles & Waves
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
New Hampshire Heart Lettering
Bold serif lettering spells out the classic message: a big capital I and a chunky heart on the top line, with N and H stacked below. Every letter and the heart are cut straight through, so the whole declaration of Granite State pride glows brightly at dusk. This easy lettering design just needs clean corners; cut each letter's straight strokes first, then finish the serifs, and save the simple heart shape for a satisfying last piece.
New Mexico Heart Lettering
Block letters spell out I heart NM in two rows, with a bold heart standing in for love, all pierced clean through the pumpkin wall. Each letter is a chunky serif shape with wide strokes, so there are no fragile slivers despite the lettering. This easy design carves quickest if you remove the heart first, then work the letters left to right, keeping the serifs crisp with short controlled cuts.
Octopus Face Pumpkin Stencil
A stylized cartoon octopus face fills this hard pumpkin stencil with a nearly circular head outline, two large round eyes with lash-like detail above them, a central beak-like nose bridge, and a decorative lower section featuring a symmetrical arch with layered cutwork and scalloped tentacle bases on each side. The round eyes are solid islands of pumpkin skin that must be preserved while the surrounding face is cut away. Carve the outer circular head arc first, then remove the face background working around the solid eye discs, and finish with the fine scalloped cuts at the bottom.
One-Eye Arched-Brow Smile
A single giant eye dominates this friendly monster face, with a dark round pupil left in place at its center and a curved brow arched above. Below, a huge grin sweeps ear to ear with pointed dimples at each corner. The eye ring, brow, and smile are cut through while the pupil stays as an island of shell, which is what earns the medium rating; anchor that pupil with a toothpick from behind if it feels loose.
One-Eyed Furry Monster Pumpkin Stencil
A round, furry one-eyed monster stands full-body on this hard pumpkin stencil: a small round head with two stubby antennae sits atop a wide spherical body edged with shaggy fur, two four-fingered hands extend to either side, and two thick legs end in rounded shoes at the bottom. The mouth is a wide toothy grin with individual tooth gaps cut into the lower body. Carve the large body outline first since the shaggy fur spikes are easier to cut when the surrounding pumpkin skin is still firm; save the small tooth gaps inside the grin for last.
One-Eyed Horned Monster Pumpkin Stencil
A squat, wide-bodied one-eyed monster fills this hard pumpkin stencil from head to toe: a large circular head that doubles as the body, a single giant eye at center made of three concentric rings with a crescent cut-out pupil, two small curved horns at the top, three-clawed hands on short arms at each side, and a wavy skirt-like bottom hem. The three concentric eye rings are connected by thin skin bridges and are the most fragile element; carve the outermost eye ring first and work inward, letting each ring dry slightly before cutting the next.
One-Eyed Monster Pumpkin Stencil
A round one-eyed cartoon monster fills this funny pumpkin stencil, its single large circular eye containing a crescent pupil, a wide toothy grin below, and four spindly stick arms raised overhead, each ending in a three-fingered hand. The monster's body ring and arms are left as pumpkin skin, while the eye surround, mouth opening, and spaces between the fingers are cut through, glowing when lit. Carve the tiny gaps between the finger stubs before tackling the eye ring, since those narrow channels are easiest to control before the surrounding wall is weakened.
One-Eyed Worm Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Oval Eyes and Crescent Cheeks
This delighted face beams with two big oval eyes, a small triangle nose, crescent-shaped cheek accents, and an open grin showing a pair of stubby teeth, all dusted with tiny freckle holes. Every shape is pierced through, with the teeth left attached to the upper lip. Cut the delicate crescent cheeks with the tip of your saw only, since their thin curves are the easiest pieces to crack.
Oval Eyes and Eight Cheek Dots
Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.
Oval Eyes and Round Cheeks
Two big oval eyes glow above a tiny curved smile, with a small round blush circle on each cheek that lights up like a bashful glow. All five features are pierced through, and the shapes are large and simple, making this one of the sweetest easy carves for kids to help with. Cut the little smile last with a fine blade, since that short curve is the only delicate stroke in the whole design.
Oval-Eyed Cat With Two Curls
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Parasaurolophus Pumpkin Stencil
A cute bipedal Parasaurolophus dinosaur faces right in this hard-level pumpkin stencil, with the signature backward-sweeping cranial crest arching above its round eye, a chunky body sectioned by organic blob-shaped cut-outs along the dorsal ridge and belly, two short front arms with clawed fingers, and sturdy hind legs. The blob-shaped body cut-outs stay open so the dinosaur glows in a spotted pattern when lit, while the outer silhouette stays solid. Cut the small claw details on the fingers before removing the large body sections so the arm area keeps its rigidity while you work.
Paw Print Pumpkin Stencil
A large paw print with one big central pad and four oval toe pads fills the face of this pumpkin stencil, each pad carved as a separate pierced cutout surrounded by solid orange wall. Lit from inside, the glowing ovals float against the dark background and read instantly as a cat or dog track. Cut the four smaller toe pads first while the central pad wall is still fully intact to keep the surrounding skin from flexing and cracking during the trickier large cut.
Petal Border and Button Nose
A whimsical folk-art face with pupil-in-eye ovals, arched lash brows, a button nose, and a scalloped grin full of rounded teeth, all surrounded by a lush border of petals, leaves, and teardrops. Dozens of small openings cut through, which is what earns the expert rating despite the friendly look. Work from the center of the face outward to the border so early cuts never weaken the wall around later ones.
Playful Harbor Seal
A playful harbor seal reclines with its head up, whiskers spread, and tail flippers raised in a happy curl. Everything is done with skin shaving rather than pierced cuts, so the seal's body emerges in pale relief with darker skin left for the eyes, nose, and whisker dots. It rates hard because of the fine facial detail; use a small gouge for the whisker spots and shave the body in smooth, even layers.
Playful Puppy Pumpkin Stencil
A playful puppy silhouette in a classic play-bow pose, with its rump raised, front paws stretched forward, tail curling up, and round head tilted down, is carved as a single solid cut-through shape. The whole dog reads as one open void so it blazes brightly against the uncut pumpkin surface. Because the tail curls away from the body and connects only at a narrow point near the haunches, cut the tail last after the main body is out to avoid accidentally snapping the thin bridge.