Pumpkin carving templates
1155 free printable stencils. Download, print, trace, carve.
147 results · Page 3 of 5
Reverse BOO Block Letters
The word BOO in fat block letters fills the front of the pumpkin, carved in reverse relief: the background panel is shaved away while the letters remain raised in untouched skin. No holes are pierced, so the pumpkin stays sturdy and reads clearly by daylight or candlelight. An easy etch for a first shading project; trace the letter outlines with shallow score cuts before peeling the background to an even depth.
Right Wink and Eight Freckles
A winking smiley with one open eye, one curved wink swoosh, a big grin holding a single square tooth, and a cluster of four freckle dots on each cheek. All shapes cut through, and the tiny freckles are what nudge this to medium difficulty. Punch the dots with a drill bit or apple corer before sawing the larger openings, since small circles are far easier while the wall is intact.
Rising Bat and Four Stars
A bold bat rises with scalloped wings spread wide while four small stars twinkle around it. The bat and every star are cut completely through the wall, turning the pumpkin into a glowing night-sky scene. The bat is one large connected opening, so it carves fast; poke a starter hole in the middle of the body and saw outward toward the wing scallops, finishing the little stars last.
Round and Square Eyes
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow.
Round and Triangle Goofy Eyes
One round eye and one sideways triangle eye give this pumpkin its delightfully goofy, mid-wink expression, finished with a huge upswept smile and two square teeth hanging from the upper lip. All shapes cut straight through for a bright, cartoonish glow. It is an easy crowd-pleaser; cut around each square tooth carefully, since they stay attached to the top of the mouth, and round off the smile's corners for extra charm.
Round Eyes and Broad Crescent
Two big round eyes and one broad crescent smile make up this whole cheerful design, glowing warm amber against the shell. All three shapes are cut cleanly through with no teeth or interior details, so the face works on any pumpkin color, and it looks especially striking on a blue or white heirloom variety. As an easy carve, use a round cookie cutter or drill bit to keep the eyes perfectly circular, then saw the wide grin in two relaxed passes.
Round Eyes and Button Nose
Two round glowing eyes, a tiny button nose, and one big sweeping smile give this pumpkin the friendliest face on the block. All four openings are cut straight through, with no teeth, brows, or tricky details to manage. It is about as easy as carving gets, ideal for a toddler's first pumpkin with adult hands on the saw; drill the eyes and nose with a round cutter, then take the long smile in one smooth curve from corner to corner.
Round Eyes and Heart Cheeks
A kawaii-style face made of two big round eyes, a gentle crescent smile, and a glowing heart on each cheek like a blush. All five shapes cut cleanly through the wall, and their simple outlines make this one of the easiest patterns in the collection. Start each heart at its top notch and cut down both lobes toward the point so the little cheeks come out in one neat piece.
Round Eyes and Kitchen Smile
A pair of perfectly round eyes and a gentle upturned smile give this pumpkin a warm, welcoming look that fits right in on a kitchen table or windowsill. Both eyes and the smile are simple cut-through openings with soft curves and zero fragile pieces. This easy design shines on smaller pie pumpkins; scoop the walls a little thinner than usual on a small fruit so a battery tea light can still glow brightly through the modest openings.
Round Eyes and Square Tooth
A cheerful four-hole face: two big round eyes, a small triangle nose, and a wide upturned smile with a single square tooth hanging from the top lip. Everything is a simple cut-through opening with no fragile details, making it one of the friendliest first carves for kids helping out. Drill or trace the round eyes with a cup or cookie cutter for perfectly smooth circles.
Round Eyes and Two Short Teeth
Round eyes, a small triangle nose, and a broad grin with two stubby square teeth give this jack-o'-lantern a warm, welcoming personality. The eyes, nose, and mouth are cut through, while the two little teeth stay attached along the top of the smile. On this easy carve, cut carefully around each tooth so it remains anchored to the wall; everything else is simple circles and one flowing mouth curve.
Round Happy Three-Tooth Face
A friendly little porch face with two big round eyes, each notched by a small skin tab, above a wide banner smile broken up by chunky square teeth. All openings are pierced clean through, so the whole expression lights up at night. It is an easy pattern for beginners; remove the small tooth gaps first while the wall around them is still strong, then free the large mouth section.
Round Pupils and Five Teeth
A big-eyed, grinning jack-o'-lantern face with round pupil tabs left inside each eye and five square teeth breaking up a wide smile. The eyes and mouth are cut clean through while the pupils and teeth remain attached to the rind as solid bridges. Those round pupils make this a medium carve, so pierce a relief hole beside each one first and saw toward it rather than levering the blade, which can snap the connecting tab.
Round-Cheek Two-Tooth Clown
This goofy clown face stacks triangle eyes over a big round nose, two glowing cheek circles, and a wide banana grin with two square buck teeth hanging down. All the openings are simple cut-through shapes with plenty of space between them, which makes it a friendly first carve. Cut the smallest pieces first, the teeth notches, before removing the big mouth so the wall stays sturdy.
Round-Eyed Clown With Brows
A cheerful clown face with raised curving brows, big round eyes, a round button nose, small dot cheeks, and a huge sweeping smile. Every feature is a straightforward cut-through opening, and the little cheek dots on each side add extra sparkle at night. At medium difficulty the challenge is spacing: transfer the stencil carefully so the brows sit clear of the eyes, then drill the small dots with a pumpkin drill or apple corer for perfect circles.
Round-Eyed Simple Smile
The friendliest face on the porch: two big round eyes above one broad crescent smile, and nothing else. All three shapes are full cut-throughs, so the whole design glows warm and even. With only three openings and no sharp corners, this is a perfect first carve; keep the saw moving in smooth curves and pop each piece out from the inside for the cleanest edges.
Side-Glancing Two-Tooth Smile
This classic jack-o'-lantern face pairs two round side-glancing eyes with a triangle nose and a wide grin showing two blocky teeth. Every feature is cut all the way through, so candlelight pours out of the openings while the rest of the rind stays untouched. The shapes are big and forgiving, making this a perfect first carve; make small relief cuts at the corners of the smile so your blade can turn cleanly.
Small Triangle-Eyed Smile
Made with small pumpkins in mind, this cheerful face uses two modest triangle eyes and a single wide crescent smile with no teeth to fuss over. All three shapes are cut straight through, giving a warm, friendly glow from even a tabletop-sized pumpkin. It is one of the easiest carves on the site; on a small pumpkin, use a thin serrated saw and cut the smile from the center outward so the thin curve stays even.
Smiley Face Pumpkin Stencil
A classic smiley face fills this easy pumpkin stencil: a broken circle made of twelve short arc segments forms the head outline, two tall oval eyes sit in the upper face, and a wide curved smile with rounded upturn ends completes the expression, all cut through as open negative space. The twelve dash segments that form the outer circle are separated by small uncut gaps, creating a dotted-ring effect when lit. Carve the outer arc segments first to define the circle, then cut the eyes and smile; the uncut gaps between segments are intentional and should be left untouched.
Smiley Jack-o-Lantern Pumpkin Stencil
Two large rounded arch eyes, each with a small notch cut from the bottom edge, sit above a wide U-shaped grin lined with four evenly spaced rectangular teeth in this easy pumpkin stencil. The result is a cheerful, friendly face rather than a sinister one, and when lit the broad open eyes and blocky smile radiate warmth across the porch. The small notches at the base of each eye are the only detail that can break off if carved too aggressively, so score those notch curves gently with the tip of your blade before removing the eye sections.
Smiling Emoji Pumpkin Stencil
A round smiley-face emoji with tousled hair rendered in chunky pumpkin-skin islands fills a large circular cutout on this emoji pumpkin stencil, with squinting eye arcs and a wide open-toothed grin kept as uncut bridges glowing warm orange against the lit void. The outer circle is the single largest cut, and the interior face elements are held in place by the skin bridges. Carve the interior details first, starting with the two small eye-crescent cuts, then the mouth gap, and only after those are complete open the big circular surround to avoid the face islands shifting.
Smiling Narwhal & Two Fins
A smiling narwhal glides across the pumpkin with a long spiral tusk, two side fins, and a happy upturned mouth. The whole body is skin-shave work with no pierced holes, so the pale shaved shape stands out against the dark rind by day and glows gently with a light inside. On this medium shading design, etch the thin tusk and smile lines first with a fine V-tool, then clear the wide body area so you never drag a big tool across your detail lines.
Spooky Text Pumpkin Stencil
The word "Spooky" is carved in bold bubbly lettering with each letter outlined as a cut-through shape on this Halloween pumpkin stencil. The two O's feature skull-like eye holes inside them, and drip lines hang from the letters below. Curling ribbon flourishes arc above and below the text, all pierced through. Lit from inside, the letters glow with dark gaps forming the decorative interior details. Take care to preserve the thin drip connections between letters, as those links keep each letter floating in place on the pumpkin wall.
Spouting Whale & Curled Waves
A happy whale rides curling waves while a fountain spout bursts from its blowhole, all rendered in shaved relief. No holes are pierced; you strip the skin inside the whale, spout, and wave scrolls, then shave the belly grooves and tail a little deeper for contrast. Work the long body curves first and save the thin spout droplets and wave tips for last, when your tool control is warmed up.
Star Crown and Four Tooth Grin
A crown of small four-point stars sparkles around the top of this face, while two big playful eyes with attached pupil tabs sit over a wide grin lined with little teeth. Everything is cut through, and the pupils survive as tabs rooted to the top of each eye opening. Carve the star crown first while the wall is strongest, then cut each eye around its pupil tab in small strokes so the tabs stay put.
Star Eyes and Six Freckles
This starstruck face beams with two five-pointed stars for eyes, curved brows arching above them, a wide open grin with tiny teeth, and three round freckles dotting each cheek. All the features are pierced through the wall, and the star eyes are the showpieces. Cut each star from its center out to the points, and drill the six freckles with a small round bit for perfectly matched circles.
Sun With Eight Rays
A bold sun built from a glowing circular ring surrounded by eight fat triangle rays, evenly spaced like a compass. Every ray and the ring band are cut fully through, so the whole emblem blazes with candlelight while the center disc and surrounding skin stay dark. This easy design suits first-time carvers; cut the ring in short arc sections rather than one continuous pass to keep the circle round.
Swirling One-Tooth Smile
This cheerful jack-o'-lantern face pairs big round eyes with a huge sweeping grin, a single pointed tooth, and playful swirl accents curling around the cheeks and brow. Every element is cut fully through, so the eyes, nose, mouth, and swirls all blaze with candlelight. The long curved swirls are the tricky part, so cut them in short passes and leave the thin bridges between shapes for last.
Tall Cat With Rounded Teeth
An upright cat face sized for taller pumpkins: leaf-shaped eyes, a small triangle nose, three long whisker slits on each cheek, pointed ears, and a smiling mouth with rounded teeth left in place. Every feature is a simple pierced cutout. Carve the skinny whisker slits with a fine blade before opening the larger eyes and mouth so the wall stays stiff while you work.
Tall Eyes and Crooked Tooth
Two tall rounded eyes of slightly different sizes sit high on the pumpkin above a small off center smile holding one square tooth. Only three openings get cut, which keeps this easy pattern quick and friendly rather than frightening. Leave the little tooth attached by carving carefully around it inside the mouth opening, and save the smaller eye for last while your blade is warmed up.
Tall Eyes and Deep Crescent
A tall, friendly face made of just three shapes: two upright oval eyes and one deep crescent smile sweeping nearly the full width of the pumpkin. All three openings are pierced through, and the design especially suits oblong or elongated pumpkins. It is an easy carve with big forgiving shapes; cut the wide smile in two halves that meet at the center bottom so the long curve stays smooth and the flap comes out in manageable pieces.
Tall Eyes and Twin Upper Teeth
The timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad smile notched by two square upper teeth. Every element cuts straight through with simple lines, making this the ideal very first pumpkin carve. Use long, steady saw strokes and keep the blade perpendicular to the shell so the triangle points stay sharp, then pop each piece out from the inside.
Tall Happy Face
A big cheerful face for tall pumpkins: two large round eyes with attached rind pupils, a small triangle nose, and a huge open grin with a single square tooth notching the lower lip. All the features are cut through for maximum glow. Keep the eye pupils attached by leaving their connecting bridges generous, and angle your blade slightly outward so the round openings do not pinch inward as the pumpkin softens.
Tall Oval Eyes and Small Smile
Two tall oval eyes and a small curved smile make up this cheerful minimalist face. All three shapes are cut fully through the wall, so the design carves in minutes and beams warm light from every opening. It is an ideal first pumpkin for young carvers with supervision; drill or poke a starter hole inside each eye so the saw can enter without stressing the surrounding rind.
Tall Smile and Six Cheek Dots
A tall pumpkin design with arched happy eyes, an oval nose, three dot freckles on each cheek, and a huge open smile with four little teeth hanging from the top lip. Every shape is cut through, and the six small cheek dots add a sprinkle of glowing freckles around the grin. Punch the freckle dots with an apple corer or drill bit before opening the big mouth.
Tall Star and Three Dots
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.