What size pumpkin works best for unique cute pumpkin faces?

A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin faces. Larger pumpkins make detailed cuts easier.

How do I transfer the pumpkin face to my pumpkin?

Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.

How long do these pumpkin faces take?

Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.

Unique Cute Pumpkin Faces: Free Printable Designs

Intermediate

Heart Cheeks and Eight Dots

An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.

Free PDF

Intermediate

Three-Horn Dino and Tall Frill

A friendly triceratops in full profile, cut through as one connected silhouette with its tall neck frill, three horns, sturdy legs, and thick tail all glowing. The single-opening design keeps things straightforward despite the detailed outline. The horns and the gaps between the legs are the trickiest spots; drill small relief holes at each tight corner so your saw can turn without tearing the rind.

Free PDF

Intermediate

Oval Eyes and Crescent Cheeks

This delighted face beams with two big oval eyes, a small triangle nose, crescent-shaped cheek accents, and an open grin showing a pair of stubby teeth, all dusted with tiny freckle holes. Every shape is pierced through, with the teeth left attached to the upper lip. Cut the delicate crescent cheeks with the tip of your saw only, since their thin curves are the easiest pieces to crack.

Free PDF

Intermediate

Tall Dino and Three Leaves

A long-necked brachiosaurus stretches up toward three tropical leaves floating above it, its full body cut through as one flowing silhouette from tail tip to tiny head. The leaves are separate cutouts with notched edges that add extra glow around the dino's snack. Cut the leaves first for practice, then work the dinosaur from the tail forward, saving the slender neck for careful final strokes.

Free PDF

Intermediate

Oval Eyes and Eight Cheek Dots

Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.

Free PDF

Intermediate

Bent Hat with Nine Sparkles

A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.

Free PDF

Intermediate

Seven-Rib Shell and Three Dots

A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.

Free PDF

Intermediate

Star Eyes and Six Freckles

This starstruck face beams with two five-pointed stars for eyes, curved brows arching above them, a wide open grin with tiny teeth, and three round freckles dotting each cheek. All the features are pierced through the wall, and the star eyes are the showpieces. Cut each star from its center out to the points, and drill the six freckles with a small round bit for perfectly matched circles.

Free PDF

Intermediate

Lovestruck Heart Eyes Face

This lovestruck face beams with two big heart-shaped eyes under curved brows, a wide open smile showing three square teeth, and playful dot dimples on each cheek. All the features are cut through the wall, so the hearts glow brightest and instantly read as the classic heart-eyes expression. Cut the notch at the top of each heart carefully with short strokes, since that little dip is what makes the shape.

Free PDF

Intermediate

Apple Leaf and Four Holes

A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.

Free PDF

Intermediate

Right Wink and Eight Freckles

A winking smiley with one open eye, one curved wink swoosh, a big grin holding a single square tooth, and a cluster of four freckle dots on each cheek. All shapes cut through, and the tiny freckles are what nudge this to medium difficulty. Punch the dots with a drill bit or apple corer before sawing the larger openings, since small circles are far easier while the wall is intact.

Free PDF

Intermediate

Tall Smile and Six Cheek Dots

A tall pumpkin design with arched happy eyes, an oval nose, three dot freckles on each cheek, and a huge open smile with four little teeth hanging from the top lip. Every shape is cut through, and the six small cheek dots add a sprinkle of glowing freckles around the grin. Punch the freckle dots with an apple corer or drill bit before opening the big mouth.

Free PDF

Intermediate

Moon and Six Diamond Sparkles

A large crescent moon anchors the center while six diamond sparkles and a scattering of small round dots twinkle around it, turning the whole pumpkin into a patch of night sky. Every moon, diamond, and dot is a separate pierced opening, so the pattern wraps light in all directions. Carve the crescent first, then the diamonds from largest to smallest, using a drill or apple corer for the tiny circles.

Free PDF

Intermediate

Seven Stars in a Winding Trail

Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.

Free PDF

Intermediate

Arched Eyes and Six Freckles

A vintage-style pumpkin face with tall arched eyes, a triangle nose, a gap-toothed smile, and six little freckle holes dotted across the cheeks. The eyes, nose, mouth, and freckles all cut through, and each eye keeps a rooted pupil tab attached at the bottom for old-fashioned character. Drill or poke the freckles first with a small round tool, and cut toward each pupil tab's base so those thin anchors survive.

Free PDF

Intermediate

Cat Fangs and Four Whiskers

A grinning cat face made for a black-painted pumpkin: big almond eyes with pointed ear tips, a triangle nose, four whisker slits, and a wide smile showing two tiny fangs. Every feature cuts through so the orange interior glows against the dark shell. Paint the pumpkin first and let it dry fully before transferring the pattern; carve the whisker slits last with gentle strokes so the paint edge does not chip.

Free PDF

Intermediate

Kitten with Long Whiskers

A sweet kitten face with pointed ear triangles, big almond eyes, a small triangle nose, extra-long whisker slits sweeping from each cheek, and a dainty curled smile beneath. All features are pierced through, and the long thin whiskers are what nudge this to medium difficulty. Cut each whisker as one smooth continuous stroke rather than sawing back and forth, and the slits will glow as fine clean lines.

Free PDF

Intermediate

Bee with Three Raw Stripes

A friendly bumblebee spreads four scalloped wings wide, with a round head, curled antennae, and a plump body banded by three raw stripes. This is a shading design with no pierced holes: the wings, head, and body stripes are shaved down to pale flesh while strips of dark skin form the outlines and bands. Shave the big wing panels first, then refine the narrow antennae with a small gouge.

Free PDF

Intermediate

Side-View Penguin

A plump penguin stands in profile with its beak raised, and the design is built entirely from skin shading rather than pierced cuts. You shave away the rind across the penguin's white belly and face for a bright glow, leave the darker back and flipper as untouched skin, and etch a fine outline around the whole bird. For this medium etch, remove the belly in shallow, even layers and stop as soon as light glows through at test lighting.

Free PDF

Intermediate

Round Penguin with Raw Wings

A chubby cartoon penguin stands front and center with round eye patches, a little triangle beak, stubby flippers, and wide webbed feet. The design uses skin shaving instead of holes; you peel the pale belly, face, and feet down to the flesh so they glow softly while the outline stays raised. Trace the border with a shallow V cut first, then peel inward for tidy edges on this medium carve.

Free PDF

Intermediate

Upright-Eared Bulldog Face

An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.

Free PDF

Intermediate

Floppy-Eared Labrador Muzzle

A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work.

Free PDF

Intermediate

Small-Eyed Dog and Short Smile

A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.

Free PDF

Intermediate

Three Stars and Small Crescent

Three plump five-pointed stars scatter across the upper face of the pumpkin while a small crescent moon tucks into the lower corner, capturing a dreamy bedtime sky. Every shape cuts cleanly through the wall, and the generous star sizes keep the sawing forgiving. Cut the crescent's inner curve before its outer curve so the thin horn tips at each end release without cracking.

Free PDF

Intermediate

Long-Eared Puppy with Curls

An adorable puppy face with two long floppy ears hanging down the sides, big round eyes, a small triangle nose, and a happy curled smile. Each feature is cut fully through, so the whole face beams once it is lit. The ears are the largest openings and the curled smile ends are the finest cuts; start with the small mouth curls while the pumpkin wall is still rigid, then open up the big ear shapes last.

Free PDF

Intermediate

Round-Eyed Kitten and Whiskers

A sweet kitten face with big round glowing eyes, a tiny triangle nose, a bow-shaped smile, perky ears, and fine whisker slits fanning from each cheek. Every feature is a simple pierced cutout sized for small hands to trace and grown-ups to saw. Cut the narrow whisker slits first with a detail blade while the wall is stiff, then open the larger eyes and mouth.

Free PDF

Intermediate

Ringed Planet and Four Stars

A big ringed planet dominates the middle of the design, its ring sweeping behind the glowing globe as two side wings, surrounded by four pointed stars and a few round dot holes. The planet, ring segments, and stars are all cut through for a bright cosmic display. A great medium pick for space-obsessed kids and tweens; carve the planet circle first, then add the ring wings so the thin rind gap between them stays even.

Free PDF

Intermediate

Eight Petals with Leaf Pair

Eight almond-shaped petals radiate around a solid center in this graceful flower design, with a pair of pointed leaves below and small accent holes dotting each side like falling seeds. All the petals, leaves, and dots are pierced through while the round flower center stays intact, held by the uncut spokes between petals. For this medium carve, cut opposite petals in pairs as you work around the circle so pressure stays balanced and the center never loosens.

Free PDF

Intermediate

Three Rainbow Arcs and Sun

Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure.

Free PDF

Intermediate

Moon with Five Stars and Dots

A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.

Free PDF

Intermediate

Three Crescents and Five Stars

Three crescent moons stack down the center of the pumpkin, each curving the same direction, with five little five-point stars scattered around them like a night sky. Every moon and star is cut cleanly through, so the whole face twinkles once the candle is in. A pleasant medium carve; punch the small stars first with a detail saw, then cut each crescent from the inner curve outward to keep the horn tips sharp.

Free PDF

Intermediate

Four Trailing Stars and Dots

Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.

Free PDF

Intermediate

Three Unequal Stars and Dots

Three five point stars in different sizes drift diagonally across the pumpkin, joined by a scatter of small round dots like distant starlight. Each star and dot is cut fully through, turning the whole pumpkin into a little constellation lantern. The medium challenge is the stars' inner corners; use a thin blade, cut point to point, and finish the tiny dots with a drill or apple corer.

Free PDF

Intermediate

Three Mushrooms and Four Dots

Three toadstool mushrooms of staggered heights cluster at the base of a tall pumpkin, with four round dots floating above them like drifting spores. The mushroom caps, stems, and dots are all cut fully through, so the whole woodland scene glows as connected pools of light. For this medium carve, cut the two small side mushrooms first to warm up, then tackle the big center cap; leave the narrow stem-to-cap junctions until your final passes.

Free PDF

Intermediate

Three Rainbow Arcs and Clouds

Three nested rainbow arcs stretch across the pumpkin, each end tucking into a puffy little cloud at the bottom corners. The arcs and clouds all cut through the wall, and the thin ribs of skin left between the arcs are what give the rainbow its striped look. Cut the innermost arc first and work outward, supporting each rib with your free hand so those curved strips do not snap.

Free PDF

Intermediate

Seated Capybara with Smile

The internet's favorite chill rodent sits in calm profile, its whole rounded body glowing warmly with a small dark eye and nostril left as untouched spots of skin. Rather than piercing the wall, you shave the capybara's full silhouette down to the inner flesh so it lights up as one soft shape. For this medium shading carve, peel the big body areas with a flat scraper, thin them evenly, and leave the eye and nose dots strictly alone.

Free PDF

Intermediate

Six Petals and Six Dots

A six-petal flower blooms at the center, each teardrop petal cut fully through around a solid rind disc that forms the flower's middle. Six small round holes circle the bloom like scattered seeds, letting extra pinpoints of light through. Designed to shine on a bottle gourd or pumpkin as a garden lantern; a medium carve where the main care point is keeping the petal tips from tearing into the neighboring holes.

Free PDF

Intermediate

Rainbow and Two Clouds

A four-band rainbow arches across the top of the design, with two puffy clouds floating beneath its ends. Each rainbow band and both clouds are cut fully through, so the concentric arcs glow in bright stacked stripes separated by thin ribs of rind. This medium pattern lives or dies by those ribs, so cut the innermost arc first and work outward, supporting each rib with your free hand as you remove the waste.

Free PDF

Intermediate

Rising Bat and Four Stars

A bold bat rises with scalloped wings spread wide while four small stars twinkle around it. The bat and every star are cut completely through the wall, turning the pumpkin into a glowing night-sky scene. The bat is one large connected opening, so it carves fast; poke a starter hole in the middle of the body and saw outward toward the wing scallops, finishing the little stars last.

Free PDF

Intermediate

Cat Head With Curled Hat

A cat's head wearing a floppy witch hat, carved as one connected glowing shape with the hat brim flaring wide and the tip curling over. Pointed whisker cuts flick out from each cheek, and the whole silhouette is cut through so it lights up as a single bold window. A manageable medium carve; the curl at the hat tip is the trickiest sliver, so saw it slowly and support the rind with your free hand.

Free PDF

Intermediate

Smiling Sea Turtle

A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.

Free PDF

Intermediate

Eight-Petal Dot Mandala

Eight oval petals radiate from a round center opening, with a small dot punched between each petal to complete a tidy flower mandala. Every element is a full cut-through, so the finished pattern beams like a stained-glass window after dark. Punch all the little dots with a drill bit or apple corer before sawing the petals; the spacing stays much cleaner that way.

Free PDF

Intermediate

Leaping Dolphin & Two Waves

A dolphin arcs joyfully above two rolling waves, its curved body, dorsal fin, flippers, and smiling beak all drawn in bright shaded lines. The design uses skin-shave shading only, so you scrape away the outer skin along the dolphin and wave shapes while the wall stays solid. At medium difficulty, work the long body curve in one smooth continuous pass before adding the wave lines, which keeps the leap looking fluid.

Free PDF

Intermediate

Cat With Curled Muzzle

A sweet cat face fills the pumpkin with big rounded eyes, a tiny triangle nose over a curled smiling muzzle, pointed ears, and three whiskers flaring from each cheek. The large eye openings keep their pupils as attached tabs of skin, which is the trickiest part of this medium carve. Cut around each pupil tab slowly and leave its connecting bridge generous so the eyes keep their expression.

Free PDF

Intermediate

Unequal-Eyed Whiskered Cat

A playful cat face built from two pointed ears, one large round eye and one smaller one, a tiny nose, and three long whisker slits flaring out on each side. All the shapes are pierced through so the ears, mismatched eyes, and whiskers glow in a wide band across the pumpkin. Cut the skinny whisker slits first while the wall is strongest, then open the bigger eye holes.

Free PDF

Intermediate

Sleeping Moon, Stars & Cloud

A sleepy crescent moon with a gentle closed-eye face drifts above a puffy cloud, with two twinkling stars floating at its side. Most of the design is shaded by shaving the skin so the moon and cloud glow softly, while the stars can be etched to match. Keep your shave shallow on the facial features, going just deep enough on the eyelid and lips that they read as darker lines.

Free PDF

Intermediate

One-Eye Arched-Brow Smile

A single giant eye dominates this friendly monster face, with a dark round pupil left in place at its center and a curved brow arched above. Below, a huge grin sweeps ear to ear with pointed dimples at each corner. The eye ring, brow, and smile are cut through while the pupil stays as an island of shell, which is what earns the medium rating; anchor that pupil with a toothpick from behind if it feels loose.

Free PDF

Intermediate

Wink and Split-Tongue Smile

A playful winking face sticks its tongue out at trick-or-treaters: one round eye is a full cutout, the other a squeezed-shut winking arc, above a wide grin with a dangling split tongue. The face ring, eyes, and mouth are pierced through while the tongue stays attached as a bridge of pumpkin. Cut around the tongue last and leave it slightly thicker than the line for strength.

Free PDF

Intermediate

Woolly Alpaca & Long Neck

A woolly alpaca stands in profile with its long neck raised, its whole fluffy body rendered as one shaved shape with a sweet stippled face. This is a continuous-wall design: peel away just the skin inside the alpaca outline so the pale flesh reads as its fleecy coat, with no pierced holes. Use a small loop tool for the tight fur texture around the head, and work in thin layers so you never break through.

Free PDF

Intermediate

Turtle & Eleven Shell Plates

A friendly turtle ambling along in profile, its domed shell divided into a mosaic of eleven plates, with a lifted head, dot eye, and stubby legs. This is a shading design: you shave the skin inside each shape so the pale flesh shows, leaving thin dark rind lines between the shell plates. Work plate by plate and keep the dividing ridges at least a knife-width wide.

Free PDF

Intermediate

Smiling Narwhal & Two Fins

A smiling narwhal glides across the pumpkin with a long spiral tusk, two side fins, and a happy upturned mouth. The whole body is skin-shave work with no pierced holes, so the pale shaved shape stands out against the dark rind by day and glows gently with a light inside. On this medium shading design, etch the thin tusk and smile lines first with a fine V-tool, then clear the wide body area so you never drag a big tool across your detail lines.

Free PDF

Intermediate

Seal Outline & Whiskers

A playful seal rendered in flowing line art, propped up on its front flippers with whiskers, a bright eye, and body contours traced in glowing strokes. Nothing is cut through; you shave the skin along each outline so the lines light up like neon while the wall stays solid. Since medium-difficulty shading rewards steady hands, score the outlines with a knife tip first, then widen them evenly with a small gouge.

Free PDF

Intermediate

Cat Face & Eight Whiskers

A sweet cat face rendered entirely in surface shading: pointed ears with inner triangles, wide eyes with crescent pupils, a small nose, a curved smile, and eight long whiskers fanning across the cheeks. Nothing is pierced through, so you shave away just the orange skin and let the pale flesh show the design. At medium difficulty, keep your scraping depth even along the thin whisker lines so they all glow with the same brightness.

Free PDF

Intermediate

Wavy Jellyfish & Bubbles

A serene jellyfish drifts across the pumpkin, its smooth dome bell trailing five wavy tentacles among scattered bubbles. Nothing is pierced; the entire design is shaved into the skin so the bell, tentacles, and bubbles appear as pale carved relief against the orange rind. For this medium etch, remove only the skin and a thin layer of flesh at an even depth so the lines stay crisp and uniform.

Free PDF

Intermediate

Interlocking Double Hearts

Two large hearts overlap and interlock, their outlines woven so one band passes over and under the other like linked rings. Nothing is pierced: you shave away only the skin along the heart outlines, leaving pale glowing bands against the untouched orange wall. Sketch the over-under crossings on the pumpkin before you shave, since keeping those weave points straight is the trick to this medium-level etch.

Free PDF

Intermediate

Little Etched Hedgehog

A sweet little hedgehog shown in profile, with a pointed snout, a dot eye, tiny feet, and a back full of spiky quills rendered as star-like bursts. Nothing is pierced; you shave away only the outer skin inside the outline so the pale flesh forms the hedgehog against the dark rind. Use a shallow loop tool and keep an even depth so the quill points stay crisp.

Free PDF

Intermediate

Four-Wing Dragonfly

A graceful dragonfly spreads four broad wings from a segmented body that runs straight down the pumpkin, with two small antennae curling from its head. Nothing is pierced; instead you shave the skin inside each wing and body segment so the shapes read as pale etched panels against the orange rind. Use a loop tool and keep the shave shallow so the wing outlines stay crisp.

Free PDF

Intermediate

Waving Wispy Ghost

A friendly ghost with trailing wisps waves from the pumpkin, its oval eyes and mouth left as darker raised skin against the pale shaved body. There are no pierced openings; you peel the skin away inside the ghost outline so the flesh glows gently when lit. Shave in smooth, overlapping strokes and stop at the eye and mouth outlines so those features stay dark and crisp.

Free PDF

Intermediate

Eight-Bridge Circular Smile

A big circular smiley face beams from the pumpkin, drawn with a segmented ring outline, two oval eyes, and a wide upturned smile with curled corners. The ring, eyes, and mouth are all cut through, while small bridges break the circle into sections that keep the face anchored to the shell. Leave every bridge intact until the end so the outline ring stays firmly attached.

Free PDF

Intermediate

Simple Crescent & Star

A slim crescent moon curves beside a small five-pointed star, both cut fully through so the pair glows like a night sky against the pumpkin. There are only two openings, which keeps the carve quick and tidy. The tapered tips of the crescent are the trickiest cuts, so work from the widest part of the moon toward each point and let the tips meet cleanly rather than forcing the blade.

Free PDF

Intermediate

Three Spotted Mushrooms

Three spotted toadstools rise from a tuft of grass, one tall cap flanked by two smaller mushrooms. This is a shading pattern: you shave away the skin around the stems and caps so they glow softly, while the round spots are scraped a touch deeper for contrast. Nothing is pierced through, which keeps the pumpkin sturdy. Work in shallow layers and stop when light just starts to show through the wall.

Free PDF

Intermediate

Textured Coastal Starfish

A five-armed starfish rendered entirely in surface shading, with a dotted texture running down each tapered arm for a realistic sea-star look. Nothing is pierced through: you shave away the outer skin inside the outline while the pumpkin wall stays intact, so it reads beautifully in daylight. At medium difficulty, scrape shallow and even first, then deepen the dotted ridges last so the texture stays defined.

Free PDF

Intermediate

Dog Bone & Four Paw Prints

A chunky dog bone sits at the center with four paw prints scattered around it, one near each corner. Instead of cutting through, you peel away just the orange skin inside each shape so the bone and paws glow as smooth pale panels against the untouched rind. A medium shading pattern that forgives wobbles; score each outline first, then lift the skin in shallow strips with a peeler or gouge.

Free PDF

Intermediate

Heart Eyes and Three Teeth

Two big heart shaped eyes with curling lash accents beam above a small triangle nose and a wide grin broken by three square teeth. Every shape is cut all the way through, so candlelight pours out of the hearts and the toothy smile. Take the lash flicks slowly with a fine saw, since those narrow tips are the only fiddly part of this medium design.

Free PDF

Intermediate

Five Petal Flower

A five petal flower with slender veins radiating from a round center fills the front of the pumpkin. Nothing is pierced; you shave away only the skin inside each petal and the center disc so the flesh glows softly while the wall stays solid. Use a loop tool and keep the shaving depth even across all five petals so the whole bloom lights at the same brightness.

Free PDF

Intermediate

Four-Arch Rainbow

Four nested rainbow arches glow from the lower half of the pumpkin, each band separated by a strip of untouched shell. The arch openings are cut all the way through while the curved ribs between them stay in place to define the rainbow shape. Start with the smallest inner arch and work outward so the narrow ribs keep their support as long as possible.

Free PDF

Unique Cute Pumpkin Faces

100% free

Print-ready PDF

Carve tonight

78 unique cute pumpkin faces

Row of Hearts and Dots

Fan Tail Fish with Low Notches

Seated Rabbit with Split Ears

Curled Dolphin Profile

Bone Below Two Paw Prints

Large Heart and Two Paw Prints

Six Hearts and Tiny Top Heart

Seven Hearts in a Tall Zigzag

Eight Hearts and Eight Dots

Split Tooth and Two Sparkles

Sleepy Eyes and Eight Lashes

Two Fish and Six Bubbles

Heart Cheeks and Eight Dots

Three-Horn Dino and Tall Frill

Oval Eyes and Crescent Cheeks

Tall Dino and Three Leaves

Oval Eyes and Eight Cheek Dots

Bent Hat with Nine Sparkles

Seven-Rib Shell and Three Dots

Star Eyes and Six Freckles

Lovestruck Heart Eyes Face

Apple Leaf and Four Holes

Right Wink and Eight Freckles

Tall Smile and Six Cheek Dots

Moon and Six Diamond Sparkles

Seven Stars in a Winding Trail

Arched Eyes and Six Freckles

Cat Fangs and Four Whiskers

Kitten with Long Whiskers

Bee with Three Raw Stripes

Side-View Penguin

Round Penguin with Raw Wings

Upright-Eared Bulldog Face

Floppy-Eared Labrador Muzzle

Small-Eyed Dog and Short Smile

Three Stars and Small Crescent

Long-Eared Puppy with Curls

Round-Eyed Kitten and Whiskers

Ringed Planet and Four Stars

Eight Petals with Leaf Pair

Three Rainbow Arcs and Sun

Moon with Five Stars and Dots

Three Crescents and Five Stars

Four Trailing Stars and Dots

Three Unequal Stars and Dots

Three Mushrooms and Four Dots

Three Rainbow Arcs and Clouds

Seated Capybara with Smile

Six Petals and Six Dots

Rainbow and Two Clouds

Rising Bat and Four Stars

Cat Head With Curled Hat

Smiling Sea Turtle

Eight-Petal Dot Mandala

Leaping Dolphin & Two Waves

Cat With Curled Muzzle

Unequal-Eyed Whiskered Cat

Sleeping Moon, Stars & Cloud

One-Eye Arched-Brow Smile

Wink and Split-Tongue Smile

Woolly Alpaca & Long Neck

Turtle & Eleven Shell Plates

Smiling Narwhal & Two Fins

Seal Outline & Whiskers

Cat Face & Eight Whiskers

Wavy Jellyfish & Bubbles

Interlocking Double Hearts

Little Etched Hedgehog

Four-Wing Dragonfly

Waving Wispy Ghost

Eight-Bridge Circular Smile

Simple Crescent & Star

Three Spotted Mushrooms

Textured Coastal Starfish

Dog Bone & Four Paw Prints