100 Hard Pumpkin Designs
We curated 100 of the very best hard pumpkin designs so you can pick one and start carving in minutes.
1. Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
See template →2. Kawaii Mushroom Pumpkin Stencil
A kawaii-style mushroom character fills this hard pumpkin stencil, with a broad spotted cap, small horns or fins at the sides, and a round face below it showing large anime eyes and a tiny curved mouth. The cap spots are solid orange circles against a pierced cap background, and the face details are fine interior cuts within the solid round head. Carve the small circular spots on the cap before removing the large open cap area, so those circles have firm pumpkin wall behind them while you make the precise cuts.
See template →3. Ghost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
See template →4. Jack-o-Lantern Face Pumpkin Stencil
A grinning jack-o-lantern face carved onto a jack-o-lantern makes this a pumpkin-within-a-pumpkin design: a wide ovoid pumpkin shape with a stubby stem has a furious face of angled triangular eyes, heavy brow cuts, and two rows of large zigzag teeth separated by a thick horizontal lip band. All the face features are cut through as open shapes. Carve the inner tooth gaps first, since they sit between two rows that span the widest open area, then release the eye triangles and brow cuts last to keep the upper face stable.
See template →5. Snarling Wolf Face Pumpkin Stencil
A wolf face stares straight forward in this hard pumpkin stencil, its large triangular ears open and pierced, its almond-shaped eyes cut through, and its muzzle parted to reveal a fanged open mouth. The fur around the face is rendered as jagged zigzag edges, and the nose bridge and cheek ruff details are a mix of solid and cut sections that read as fur texture when lit. Carve the two thin lightning-bolt-shaped brow marks above the eyes before removing the larger eye cutouts, as they are the most fragile narrow strips in the design.
See template →6. Howling Wolf Moon Pumpkin Stencil
A wolf howling at a large crescent-shaped moon fills this hard pumpkin stencil, with a trio of jagged pine trees to the left and the wolf's body set as a solid orange silhouette inside the open pierced moon arc. The moon itself is the glowing background that frames the wolf and trees, while the animal and pines remain as uncut pumpkin skin. When carving the pine tree segments, cut each zigzag branch notch one at a time using a small detail blade, since the tight repeated angles along the tree edges are easy to over-cut and merge into a single straight line.
See template →7. Rising Zombies Pumpkin Stencil
Two zombie figures rising from the ground face inward in this hard pumpkin stencil, their ragged arms reaching upward and their tattered lower bodies emerging from earth at the base of a tall oval negative space. The zombies read as solid orange silhouettes flanking a large central open oval, so the lit jack-o-lantern glows through that oval while the outstretched zombie arms and rotting fingers stand out in relief. Carve the finger details at the top of each arm before cutting the large central oval, as the fingers are the most fragile elements and benefit from the extra pumpkin mass still in place.
See template →8. West Virginia Pumpkin Stencil
West Virginia's distinctive outline is one of the most jagged of all state stencils, with the panhandle jutting sharply upward from the north and a second narrow protrusion to the northeast, while the southwestern border follows a highly irregular path of peaks and valleys. The entire shape is pierced as one complex cutout. Because of the two thin panhandle arms, cut those narrow protrusions first with a detail blade while the body is still solid and can absorb any flex, then open the main body from the center outward.
See template →9. Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
See template →10. Scarecrow Pumpkin Stencil
A simple, cartoonish scarecrow stands with arms outstretched on this hard pumpkin stencil, wearing a wide-brimmed hat and showing a squiggly grimace for a mouth. The body and hat are solid pumpkin flesh while gaps between the outstretched arms, the ragged tunic slashes, and the stick post below are all cut through. The thin neck post connecting the head to the body is the most fragile element; complete all arm and tunic cuts before touching the area around that connector to keep the head from separating prematurely.
See template →11. Snail Pumpkin Stencil
A giant snail is the surprising subject here: a segmented spiral shell packed with dashed arc cutouts occupies most of the design, while the snail's body stretches out to the right and two small eyestalks rise from the head. The shell is built from concentric broken rings that leave thin solid bridges between segments, and the effect when lit is an intricate circular lantern orbited by a slow-moving creature. Cut the outermost arc segments of the shell first and work inward toward the central solid disc so the bridges hold until last.
See template →12. UFO Flying Saucer Pumpkin Stencil
A cartoon flying saucer floats in this hard-difficulty pumpkin stencil, with a domed cockpit at the top showing a simple ghost-like alien face inside. A wide flattened disc body below features a row of oval porthole cutouts around its rim and sweeping curved rings beneath. The alien inside the dome and the porthole ovals are each separate pierced shapes. Cut the dome interior and the alien face details before opening the porthole ovals around the rim, so the dome remains attached and stable while you navigate the narrow disc body.
See template →13. Coronavirus Pumpkin Stencil
This hard-difficulty pumpkin stencil depicts a coronavirus particle rendered as a circular arrangement of spike proteins: round-tipped stalks radiate outward from a central ring of crescent shapes, all cut as individual floating pieces within a large open surround. When lit, the scattered spikes and interior crescents glow as a constellation of shapes against the dark pumpkin. Carve the inner crescent cutouts at the center first, then work spike by spike outward, since removing the outer spikes early can destabilize the central ring.
See template →14. Cartoon Dragon Pumpkin Stencil
A small cartoon dragon perches in a rounded frame in this hard pumpkin stencil, showing a round-headed wyvern with stubby wings fanned behind it, a curled foreleg, and a spiky crest along the top of the frame. The body and wing details are a mix of open pierced sections and thin solid bridges, so the lit jack-o-lantern reveals the creature's rounded features glowing warmly inside the frame. Carve the two small oval eye cutouts and the tiny claw details first before removing the larger background areas, to keep the stencil stable during the fiddly work.
See template →15. Wisconsin Pumpkin Stencil
Wisconsin's distinctive outline fills the center of this pumpkin stencil, its jagged northern coastline and small Door Peninsula peninsula cut cleanly away to glow as a single solid state shape when lit. The entire interior of the state boundary is pierced through, casting a bold Wisconsin silhouette in light against the dark pumpkin. Score the sharp indentations along the Lake Superior shoreline slowly, since those tight interior corners are where the blade most easily wanders and widens the cut.
See template →16. Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
See template →17. Farm Tractor Pumpkin Stencil
A side-view farm tractor fills this hard-level pumpkin stencil: a large rear wheel with a circular hub and cross-spoke cutouts, a small front wheel with a curved fender, a boxy cab section with cut-out windows, a squared hood, and a vertical exhaust stack. The rear wheel dominates the lower half of the composition and has the most intricate internal detail. Cut the cab windows and exhaust stack openings first while the pumpkin is still fully intact, then work on the large rear wheel spokes last, since removing them will flex the surrounding skin considerably.
See template →18. Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
See template →19. Tennessee Pumpkin Stencil
Tennessee's wide, almost rectangular state outline is cut as a single open silhouette in this pumpkin stencil, with the stepped notch on the upper-left edge and the jagged western corner representing the state's distinctive border. When lit, the entire shape glows as one bold window of light. Because the outline follows an irregular path with several sharp interior corners along the southern border, score each angle carefully and complete one full corner before moving to the next to avoid cracking the skin at the tight turns.
See template →20. Trump 2024 Pumpkin Stencil
Bold military stencil-style lettering spells "TRUMP" on the top row and "2024" flanked by two five-pointed stars on the bottom row of this hard pumpkin stencil. Each letter and numeral is a thick open outline with interior counters preserved as solid pumpkin islands. The two stars at the sides of "2024" are each pierced through as open silhouettes. Cut the enclosed counters of rounded letters and numerals first (the interior of the P, the U loops, and the 0 counter in 2024), then cut each letter and numeral outline, saving the two star shapes for last.
See template →21. Mummy Pumpkin Stencil
A mummy figure wrapped in overlapping bandage strips stands upright in this hard pumpkin stencil: a round hooded head with two crescent eye cutouts and small circle pupils, a neck section, and a torso crisscrossed with diagonal and horizontal bandage-strip cutouts that create an intricate lattice pattern in the lower half of the design. Lit from inside, the bandage lattice glows as a grid of bright lines framed by solid pumpkin strips. Begin with the two eye crescents and pupil circles in the face, then work downward through the lattice section one row at a time to keep the remaining skin stable.
See template →22. Texas Pumpkin Stencil
Texas's iconic state outline is cut as a single open silhouette in this pumpkin stencil: the rectangular panhandle at the upper left, the broad body tapering to the pointed southern tip, the ragged Gulf Coast along the eastern lower edge, and the squared-off western side. Lit from inside, the whole shape glows as an unmistakable Lone Star State window. The most demanding section is the lower Gulf coastline, where repeated small indentations create a saw-tooth edge; make these cuts last and use a narrow blade to follow the fine detail without breaking the points.
See template →23. Arched Black Cat Pumpkin Stencil
A Halloween black cat with its back dramatically arched and tail curling overhead covers this pumpkin stencil. The body is rendered with bold tribal-style linework: parallel flowing stripes run along the spine and haunches, leaving thin curved bridges of solid pumpkin wall between each cut channel. The face features large round eyes with pointed eyebrows and small whisker marks. Carve the eye circles early while the surrounding face structure is solid, then progress along the stripe channels from front to back so you don't weaken the frame before the detailed head is complete.
See template →24. Stegosaurus Pumpkin Stencil
A cartoon stegosaurus with a round friendly face, four chunky legs, and a row of large diamond-shaped back plates fills this hard pumpkin stencil. The body is carved as a wide open pierce, the back plates are pierced individually above it, and the toes and facial details are fine cut-outs. When lit, the dinosaur glows as a bright segmented shape with the plates hovering above the silhouette. Carve the face details and tiny toe lines before removing the large body section, since the body cut-through will flex the pumpkin wall and make those small details harder to control.
See template →25. Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
See template →26. Coming Soon Baby Pumpkin Stencil
This pumpkin stencil spells out "COMING SOON" in chunky rounded letters across two rows, with a pair of baby footprints replacing the two O letters in the word SOON, and a small heart dotting the I above. The letters are each bold and thick, with the interiors of rounded letters like C, G, and the zero-like Os cut away while the outlines stay solid. When carved and lit, the baby-announcement message glows warmly across the pumpkin face. Cut the two enclosed letter counters in COMING first before moving to the footprint shapes, which have the most delicate toe-dot details.
See template →27. Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
See template →28. Male Portrait Pumpkin Stencil
A male portrait rendered in spare, angular linework fills this hard pumpkin stencil: a large angular head shape, a distinctive widow's peak hairline, deep-set eye sockets with small cutout irises, a long straight nose, and a square jaw with a chin dimple. The design uses wide open negative shapes separated by just a few thin structural bridges, so the lit portrait reads as a bold, high-contrast face. The narrow bridge between the nose and the upper lip is the most vulnerable point, so score it lightly before making any cuts on either side of it.
See template →29. God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
See template →30. Semi-Truck Pumpkin Stencil
A classic eighteen-wheeler semi-truck cab shown in side profile fills this hard pumpkin stencil: a tall exhaust stack, a flat-topped sleeper cab with rectangular window cutouts, a step board, side mirrors, dual front headlights, and two large open wheel wells with small oval lug-nut details. The design reads as a cleanly geometric vehicle silhouette when lit, with the cab windows and wheel openings glowing brightest. Start with the cab window rectangles and the small mirror cutout before opening the large wheel wells, which would flex the lower pumpkin skin if cut first.
See template →31. Triceratops Pumpkin Stencil
A chubby cartoon triceratops in a walking pose fills this hard pumpkin stencil: a large frilled head with three prominent horns, two small oval nostril dots and a crescent eye below the frill, a round body, four chunky legs with pointed toe claws, and a short upturned tail. The frill at the back of the head is an open silhouette that glows as a scalloped arc. Cut the three horn outlines and the two small nostril dots first before the broader body and leg cutouts, as the nostril dots are isolated and easiest to control while the pumpkin is still intact.
See template →32. Skull Face Pumpkin Stencil
Two large angular eyes with curling inner-corner details and cocked brows form the upper half of this skull pumpkin stencil, with a small paired nasal cavity below and a wide clenched-teeth mouth at the bottom, all cuts floating separately on an otherwise solid pumpkin face. When lit, the glowing eyes and jagged teeth give the jack-o-lantern an intensely menacing expression. Cut the thin curling details inside each eye first, while the pumpkin is still rigid, then open the eye sockets, nasal holes, and wide tooth row in that order to keep the face from flexing during fine work.
See template →33. Coiled Snake Pumpkin Stencil
A coiled snake in an S-curve fills this hard pumpkin stencil, its body broken into roughly twenty irregularly shaped scale-pattern segments separated by thin cut lines, with a small triangular head visible at the upper left and the tail tapering to a narrow point at the bottom. When lit, the gaps between scale segments glow white-hot against the orange pumpkin bridges, making the snake's banded pattern pop. Start cutting at the tail tip, where the segments are smallest and most fragile, then work up the body toward the larger mid-coil pieces.
See template →34. Vampire Face Pumpkin Stencil
A vampire face shown from the shoulders up dominates this hard pumpkin stencil, featuring a high widow's peak hairline with two swept horns of hair, large pointed ears, a monocle over one eye, a hawkish nose, a thin mustache, and a jagged collar below the chin. Each facial feature is a separate cut-through piece held apart by solid pumpkin lines, so when lit the face reads as a patchwork of glowing angular shapes. The monocle circle is the most isolated piece; carve it first before the eye socket cuts nearby remove the surrounding support.
See template →35. Scary Text Pumpkin Stencil
The word "Scary" is rendered in a dripping, horror-movie hand lettering style and set inside a speech bubble outline made of jagged, claw-like strokes in this hard pumpkin stencil. The letter forms themselves are cut through while the speech bubble border stays solid, so candlelight glows through the word while the ragged bubble outline frames it in orange. The thin descenders on the letters, particularly the tail of the "y" and the base of the "S," are the most fragile bridges; cut those last after the letter interiors are already free.
See template →36. Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
See template →37. Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
See template →38. Haunted House Moon Pumpkin Stencil
A tall haunted mansion with jagged roofline towers, arched windows, and a wide front door fills the center of a large circular moon cutout in this pumpkin stencil. Two bats flank the upper towers, and tufts of grass sprout at the base. The moon circle is the main open cut, while the house is retained as pumpkin wall, glowing orange against the dark void. Carve the rectangular window openings and the door arch before cutting the surrounding moon circle, so the house structure has support while you work the fine edge details.
See template →39. Witch Silhouette Pumpkin Stencil
A full-length witch silhouette fills this jack-o-lantern pumpkin stencil: pointed hat, flowing robes, and a broomstick are all rendered as pierced cut-through shapes, with the surrounding robe fabric left as solid orange pumpkin wall. On the lit pumpkin the broomstick and cloaked figure read as glowing orange forms against a dark background. The witch's hat brim is a narrow horizontal bridge; cut that piece last and work inward from the wider robe sections to keep it from snapping under tool pressure.
See template →40. Witch on Broomstick Moon Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
See template →41. Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
See template →42. Spooky Text Pumpkin Stencil
The word "Spooky" is carved in bold bubbly lettering with each letter outlined as a cut-through shape on this Halloween pumpkin stencil. The two O's feature skull-like eye holes inside them, and drip lines hang from the letters below. Curling ribbon flourishes arc above and below the text, all pierced through. Lit from inside, the letters glow with dark gaps forming the decorative interior details. Take care to preserve the thin drip connections between letters, as those links keep each letter floating in place on the pumpkin wall.
See template →43. Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
See template →44. Skeleton Ghost Pumpkin Stencil
A skeletal ghost charges forward with clawed hands outstretched, its skull face showing hollow eyes and a jagged open mouth, the lower body dissolving into flowing tattered shroud wisps in this hard pumpkin stencil. The cut pieces include the eye and mouth openings in the skull, the gaps between the outstretched claw fingers, and several large void areas within the billowing shroud body. The thin strips between the claw fingers are fragile; cut each finger gap fully before moving to the large shroud openings below.
See template →45. Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
See template →46. Cute Starfish Pumpkin Stencil
A stylized starfish with five rounded arms and a cute cartoon face, including two large round eyes with small lashes, a button nose, and a gentle smile, sits symmetrically centered in this hard pumpkin stencil. The arm openings and facial features are cut through while the narrow bands between the arm segments stay solid, framing the starfish shape clearly when lit. The thin band between the two eye holes is the most vulnerable bridge; cut the right eye last so you can brace the section from both sides during that final cut.
See template →47. Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
See template →48. Skeletal Ghost Pumpkin Stencil
A skeletal ghost figure with a domed, skull-like head, jagged mouth slits, and broad swept wings dominates this pumpkin stencil. The design carves as widely spaced curved pierce-through sections that fan across both sides, leaving bold orange bridges to define the creature's torso and face. Lit from inside, the jack-o-lantern reads as a dark specter bursting outward. Cut the inner face details first before tackling the large wing panels so shifting your grip doesn't crack the delicate center column.
See template →49. Tribal Black Cat Pumpkin Stencil
An arched black cat with its back up and tail raised high forms this hard pumpkin stencil, drawn in a tribal-tattoo style with flame-shaped fur tufts along the spine, a narrow elongated face with almond-shaped eyes, and wispy leg strokes that taper at the paws. The many curved, pointed cuts leave thin pumpkin bridges between them that form the cat's body outline when the jack-o-lantern is lit. The wispy tail tip at the very top is the most isolated piece; cut it before removing the large body negative-space below.
See template →50. Silly Monster Pumpkin Stencil
A shaggy round monster with a small zigzag hair antenna on top, wide round eyes, a grinning row of rectangular teeth, and two outstretched hands with four or five digits fills this funny pumpkin stencil, with about eight to ten interior pierced slashes representing the fur texture along with the facial features and foot claws. The lit pumpkin reveals the entire creature in warm orange silhouette against a dark background. Cut the large central body void first, then work through each interior fur slash and claw detail, leaving the two floating hand cutouts for last.
See template →51. Snarling Rat Pumpkin Stencil
A detailed rat rearing up on its hind legs fills this hard pumpkin stencil, posed with clawed front paws raised, mouth open in a snarl, and a long curling tail sweeping around the lower body. Unlike the simpler silhouette rat in this collection, this design uses internal cut lines to carve fur texture, claw separations, and an open mouth, leaving thin pumpkin ridges that define the anatomy when lit. Cut the individual claw slots in the front paws first so those delicate tips are still surrounded by solid pumpkin.
See template →52. Ghost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
See template →53. See-No-Evil Monkey Pumpkin Stencil
The see-no-evil monkey emoji is rendered as a wide face with two large hands pressed over the eyes and two banana-shaped ears flaring out, with a broad smile, round nose dots, and small cheek details visible below the hands in this hard pumpkin stencil. The overlapping hand fingers create a dense grid of narrow cut channels across the upper half of the design. Work the individual finger slots from the center outward so each completed cut is braced by uncut pumpkin on at least one side.
See template →54. Sea Turtle Pumpkin Stencil
A sea turtle viewed from above fills this pumpkin stencil, with four swept-back flippers and a dome-shaped shell covered in roughly twenty interlocking polygonal plates, each plate a separate cut piece separated by thin lines of uncut pumpkin. The resulting jack-o-lantern glows through every shell segment individually, mapping out the turtle's scute pattern in orange-framed light. Cut the smallest outer-edge shell plates first since they have the least surrounding support, then work inward toward the larger central scutes.
See template →55. RIP Graveyard Pumpkin Stencil
A moonlit graveyard scene arches across this pumpkin stencil, with a large cracked tombstone bearing the letters RIP at center, flanked by two cross-topped stones and tufts of grave grass below, all framed inside a curved arch at the top. The composition is pierced so the entire scene cuts away from the pumpkin wall and glows as one large backlit picture. Cut the letter shapes inside RIP first with a detail blade, then work outward through the tombstone cracks, cross details, and grass tufts before removing the large arch framing area last.
See template →56. Its a Girl Pumpkin Stencil
The phrase "it's a girl" in chunky lowercase lettering fills this pumpkin stencil, with a small heart shape tucked below the word "girl" to complete the baby announcement message. Each letter and the heart are cut-out shapes, many with enclosed counters that require careful handling. The interior dot of the letter i in "girl" is the trickiest floating island: cut around it last and keep the skin disc in place using a toothpick or small skewer pressed through the back of the pumpkin wall to hold it.
See template →57. Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil, rendered as a set of curved, teardrop-shaped petals radiating from a tight spiral center. The cut-out segments are separated by thin pumpkin-flesh bridges that hold the design together, so when lit the candle glow traces the swirling petal arrangement. Carve the smallest center pieces first to avoid cracking the surrounding petals, and keep a damp cloth nearby to prevent the thin bridges from drying out mid-session.
See template →58. Funny Monster Pumpkin Stencil
A round-bodied cartoon monster with an oversized fuzzy head, two large circular eyes, a wide fanged grin, spiky hair tufts, stubby arms raised to the sides, skinny stick legs, and round feet fills this pumpkin stencil. The creature's oval eye circles and the spaces between the arms and body are cut through, while the chunky body silhouette stays as solid orange skin. Carve the two circular eye openings and the small round nose dot at the top before cutting the body perimeter, so you can brace the knife against solid material.
See template →59. Mummy Face Pumpkin Stencil
A mummy face fills this pumpkin stencil, built from horizontal overlapping bandage strips that cross the forehead, bridge over hollow oval eye sockets, and wrap beneath a grimacing mouth with small exposed teeth. The bandage layers are the solid orange pumpkin wall while the gaps between them are pierced through, so candlelight reads as stripes of light across a dark face. Cut the eye socket ovals first, then work upward through the bandage gaps from the chin to the crown, keeping each horizontal bridge intact until the cut on either side of it is complete.
See template →60. Zombie Hands Pumpkin Stencil
Two zombie arms thrust upward side by side on this zombie pumpkin stencil, each one emerging from a ragged torn sleeve at the base, with elongated bony fingers splayed wide and dripping flesh hanging from the wrists. The arms are the solid orange wall while the space around them is pierced away, so the pair of grasping hands glows against a dark background. The skinny finger tips are the most vulnerable pieces, so keep a finger pressed gently on each tip from the outside as you cut around it to prevent the thin point from breaking off.
See template →61. Police Badge Pumpkin Stencil
A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place.
See template →62. Jolly Roger Pumpkin Stencil
A classic Jolly Roger design fills this pumpkin stencil: a grinning skull topped by a pirate hat bearing a tiny skull-and-crossbones badge sits above two crossed cutlass swords with curled hand-guards. The eye sockets, the hat badge, the small triangular nose cavity, and the gaps between the sword blades are all pierced through. Cut the miniature hat badge first since it is the most delicate isolated element, then the eye sockets and sword gaps, before finishing with the outer hat and blade silhouette.
See template →63. Rose Pumpkin Stencil
A full rose with a spiraling center bud, layered outer petals, and a thin stem with two small leaves is the subject of this flower pumpkin stencil. The petals are rendered as irregular organic cut sections that radiate from the tight center spiral outward to ragged outer edges, while the stem and leaves below are smaller separate pieces. Lit from inside, the solid pumpkin between cuts reads as petal ridges framing windows of light. Cut the innermost spiral bud sections first so the outer petals remain attached and sturdy while you navigate the tightest curves.
See template →64. Rainbow and Clouds Pumpkin Stencil
This pumpkin stencil features a rainbow of four concentric arcs rising above two puffy clouds, with scattered stars and small circles floating around the composition. The clouds and stars are separate pierced cutouts, and the arc bands are cut through with thin solid bridges between them, creating a whimsical scene that glows warmly from a candle or LED inside. Cut the small stars and round circles first while the wall is firm, then remove the cloud shapes, and finish with the long sweeping arc cuts so the composition stays supported throughout.
See template →65. Raising Hands Emoji Pumpkin Stencil
Two open hands with spread fingers are raised side by side on this emoji pumpkin stencil, each palm facing forward with small rectangular cuff shapes below the wrists. Four small triangular sparkle shapes are arranged above the hands in a row. All elements are pierced through so the lit jack-o-lantern shows a bright raising-hands celebration scene. Cut the four small triangles at the top first while the wall is thickest, then remove the cuff rectangles, and finish by cutting around the finger contours of each hand last.
See template →66. T-Rex Pumpkin Stencil
A fleshed-out T-rex stands upright in this dinosaur pumpkin stencil, with a large skull showing serrated teeth, tiny forelimbs with claw tips, a muscular body, and thick hind legs with three-toed feet rendered as solid orange pumpkin wall. The spaces between and around the figure are cut through, so the lit jack-o-lantern silhouettes the dinosaur in warm orange against a glowing background. Cut the narrow gaps between the forelimb claws and the small toe gaps first before opening any of the large surrounding sections, as those tight details are easier to control while the wall is fully rigid.
See template →67. Soccer Ball Pumpkin Stencil
A soccer ball rendered as a flat stencil pattern takes up the full face of this pumpkin carving design, with a central pentagon surrounded by curved hexagonal panels that radiate outward to the edges. The pentagon and several panel sections are cut through, while the curved connecting lines between panels remain as solid orange bridges, recreating the look of a classic black-and-white ball when lit. Carve the central pentagon first, then cut each surrounding hexagonal section in a clockwise order to keep even tension on the skin bridges.
See template →68. Velociraptor Pumpkin Stencil
A snarling velociraptor lunges forward on this dinosaur pumpkin stencil, its open jaws showing individual teeth, forelegs raised with curved claws, and a long stiff tail arcing behind. The design uses a mix of pierced negative space and thin pumpkin-wall bridges to define the body segments, so the lit jack-o-lantern shows the raptor as an orange figure ringed by dark gaps. Start by cutting the smallest interior tooth shapes and claw details before removing the large body sections, so the surrounding wall keeps the stencil stable throughout.
See template →69. Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
See template →70. Dracula Pumpkin Stencil
A bald, hollow-cheeked Dracula figure holds a grinning carved jack-o-lantern to his chest in this hard vampire pumpkin stencil. The face has arching brow ridges, deeply cut cheekbones, fang-edged lips, and small pointed ear nubs. Below the chin the figure's open cape forms a bat-wing shape, and the jack-o-lantern the vampire cradles shows its own triangular eyes and jagged smile as inner cutouts. The composition creates two overlapping scenes: a vampire face above and a glowing pumpkin face below. Work from the outside edge of the cape inward, and carve the inner pumpkin face last to avoid over-thinning the chest wall.
See template →71. Skeleton Hands Heart Pumpkin Stencil
Two skeletal hands with knuckle-ridge cuts reach upward and inward to frame a heart shape in the negative space between them in this hard-level pumpkin stencil, each finger outlined by rows of small rectangular cut-outs that read as bone segments when lit. The spaces around and between the fingers are cut away so the glowing pumpkin shows the hands as a warm orange lattice of bone detail around the central heart void. Cut the small rectangular knuckle cuts across all fingers before removing the larger surrounding background so every finger stays rigid while you work the fine detail.
See template →72. French Bulldog Pumpkin Stencil
A front-facing French Bulldog puppy sits with large upright ears, wide cartoon eyes with round pupils, a flat pushed-in nose, spot-marked cheeks with tiny freckle dots, and chunky paws crossed at the bottom in this dog pumpkin stencil. The cut-away areas around the ears, inside the eyes, and across the chest give the glowing jack-o-lantern a strong portrait effect with plenty of warm orange pumpkin skin defining the Frenchie's wrinkled face. Carve the freckle dots and pupil circles before the ear openings so the delicate face detail is cut while the surrounding skin is at its firmest.
See template →73. Parasaurolophus Pumpkin Stencil
A cute bipedal Parasaurolophus dinosaur faces right in this hard-level pumpkin stencil, with the signature backward-sweeping cranial crest arching above its round eye, a chunky body sectioned by organic blob-shaped cut-outs along the dorsal ridge and belly, two short front arms with clawed fingers, and sturdy hind legs. The blob-shaped body cut-outs stay open so the dinosaur glows in a spotted pattern when lit, while the outer silhouette stays solid. Cut the small claw details on the fingers before removing the large body sections so the arm area keeps its rigidity while you work.
See template →74. Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
See template →75. Pug Pumpkin Stencil
A grinning pug puppy sits upright in this detailed pumpkin stencil, its flat wrinkled muzzle, round cheek circles, floppy ears, curled tail, and stubby paws all rendered in interlocking cut shapes. The pug's body is largely solid orange pumpkin skin held together by thin bridges between cut sections, so the face details and surrounding silhouette glow from behind. Carve the two circular eye areas and the small nose last to avoid weakening the bridges around the mouth before the outer body is complete.
See template →76. Sea Urchin Pumpkin Stencil
A stylized sea-urchin or crown-of-thorns creature gazes out from this hard-level pumpkin stencil, with five rows of triangular spines radiating above a cute wide-eyed face: two large round eyes accented by lash-like lines, two nostril dots, a small open mouth, and curved tentacle arms spreading at the bottom. Each triangular spine and the large rectangular tooth shapes are cut away so candlelight shoots upward through the spines while the eyes and mouth glow below. Pierce the tiny nostril dots and lash-line cuts first while the face is still fully rigid.
See template →77. Witch on Moon Pumpkin Stencil
A tall oval moon dominates this hard witch pumpkin stencil, with a thin vertical broomstick cutting through the center and a small witch figure silhouetted at the bottom, surrounded by four-pointed star cutouts. The moon is carved as a large open oval, so the broom handle remains as a solid pumpkin bridge crossing the glow. Stars scattered inside and outside the moon add sparkling pinhole light around the scene. Cut the large moon oval first to establish the dominant glow, but do not sever the broomstick bridge at the center until the very last pass.
See template →78. New York Pumpkin Stencil
New York's iconic silhouette is the subject of this hard state pumpkin stencil. The broad rectangular upstate body tapers down on the left into the Hudson Valley, then Long Island extends as a long narrow arm reaching to the right, while the Adirondack notch creates a jagged step on the upper-right edge. Carved as a single large open cutout, the state glows against the dark pumpkin with Long Island's thin tail as the most structurally fragile element. Cut the main body first and leave the Long Island peninsula for the final stroke to prevent it from snapping during earlier passes.
See template →79. Mouse Skull Pumpkin Stencil
Two large round ear-shaped circles top a grinning skull face in this hard skull pumpkin stencil, the whole design dripping with melting-wax details that hang from the ears and chin. The skull's hollow round eyes and triangular nose are cut through, while the jagged smiling mouth and drip channels below the face create a pattern of narrow glowing slits. Lit inside a jack-o-lantern, the ears glow as two bright round openings above a menacing skull expression. Carve the two large ear circles first since they are structurally independent, then work down through the drips before tackling the fine interior face cuts.
See template →80. Great White Shark Pumpkin Stencil
A great white shark lunges in profile across this animal pumpkin stencil, jaws open to reveal a row of serrated teeth, a round dot eye, a prominent dorsal fin, a pair of pectoral fins mid-body, and a forked tail sweeping back to the right. The body interior is cut away in a large open section while the teeth, fins, and eye detail stay as solid bridges of pumpkin skin, letting candlelight define the shark's menacing outline from within. Cut the mouth and individual tooth points before opening the large body cavity so the head stays anchored while you work the fine detail.
See template →81. Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
See template →82. North Carolina Pumpkin Stencil
North Carolina's distinctive silhouette fills this state pumpkin stencil: a wide, roughly trapezoidal body with a notched southwestern corner, a stepped northern border, and the ragged Outer Banks barrier-island coastline jutting into the Atlantic on the right. The entire state outline is pierced through as one connected opening so candlelight floods through the recognizable shape. Because the Outer Banks coastline is the most intricate edge on this stencil, cut that section last using short, controlled strokes to keep the thin peninsular points intact.
See template →83. Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
See template →84. Palm Trees Pumpkin Stencil
Two palm trees of different heights rise from a shared sandy island base in this pumpkin stencil, the taller centered tree and a shorter leaning tree to the left each sporting fronds with individual leaflet-cut fingers spreading wide at the top. The negative space around the trunks and through the frond fingers is cut away, leaving the trunk outlines and leaflet ribs as solid orange bridges so the whole composition glows as a backlit tropical scene. Cut the individual frond leaflet gaps before removing the larger surrounding background so the frond tips never lose support from the pumpkin skin beneath them.
See template →85. Perched Raven Pumpkin Stencil
A perched raven faces slightly upward in this full-body pumpkin stencil, with ruffled neck feathers rendered as jagged white-space cuts, a round dot eye, a short hooked beak, and scaled talons gripping a branch stub at the base. The bird's silhouette stays as solid pumpkin skin while the internal feather texture and eye dot are pierced through, creating a layered glow effect where the cuts read as bright highlights within the dark bird shape. Carve the tiny eye dot and the individual feather slashes before removing the larger body background to keep the piece stable.
See template →86. Black Cat Pumpkin Stencil
A sly Halloween black cat stands upright in this hard pumpkin stencil, its body a combination of carved-open channels and solid pumpkin masses that together read as fur texture. The tail curls upward into a spiral behind the cat, and the whisker area beside the face consists of short, delicate radiating spikes that must stay intact. When lit, the cat's slitted eyes and facial details glow as narrow cuts within the solid face mass. Carve the large body cavities first, then finish the face and whisker spikes with a fine blade to avoid tearing those thin projections.
See template →87. Oklahoma Pumpkin Stencil
Oklahoma's silhouette stretches wide in this state pumpkin stencil, showing the long panhandle arm extending to the left, a nearly rectangular main body, and the jagged stepped southern border that traces the Red River. The interior is cut as one open shape, making the panhandle the defining visual element that distinguishes Oklahoma from any other state design. Because the panhandle is long and narrow, cut it first while the surrounding pumpkin skin is still firm, using a thin blade and steady outward strokes to keep the arm from cracking.
See template →88. Flying Saucer Pumpkin Stencil
A classic flying saucer seen from a three-quarter angle fills this hard space pumpkin stencil. The domed cockpit on top, the wide flat disc with a raised rim, three small round indicator lights on the underside, and three diverging tractor-beam rays below all read clearly as carved shapes. The beam rays are solid pumpkin strips between large open triangular cutouts, so lit from inside the beam glows as three bright triangular shafts pointing downward. Carve the three beam triangles first since they are the largest open areas, then work upward through the disc details and finish with the small circular indicator lights.
See template →89. Cartoon Owl Pumpkin Stencil
A round, wide-eyed cartoon owl stares straight out from this animal pumpkin stencil, its large circular eyes each filled with a solid crescent pupil, two pointed ear tufts raised above the head, stubby wing tips at the sides, a triangular beak at center, and three rows of curved feather-scale cuts across the belly. The eyes and belly scales are pierced through while the owl body and face remain solid, so candlelight picks out the layered feather pattern in warm rows of light. Cut all the small belly-scale crescents before tackling the eye openings to keep the face rigid while you work the detail.
See template →90. Spiky Spider Pumpkin Stencil
A front-facing spider with a cartoon scowl and spiky, porcupine-like hair fills this hard spider pumpkin stencil. The round, spiky abdomen is encircled by a ring of radiating spike-like projections, and four angular legs extend from each side within an outer octagonal border. The face detail consists of two teardrop-shaped eyes and a frowning mouth, all carved as open shapes inside the solid round body. When lit, the spiky halo around the body glows intensely. Carve the outer octagonal border ring first, then the leg pairs, before finishing the delicate face cutouts inside the central body.
See template →91. Owl on Moon Pumpkin Stencil
A compact owl perches on a branch inside a full-circle moon background in this hard-level animal pumpkin stencil, the bird shown front-facing with heavy-lidded crescent eyes, a small triangular beak, three rows of curved feather-scale cuts on the belly, and stubby feet gripping the branch below. The circular moon background is cut away all around the owl, leaving the bird as a solid silhouette connected to the outer ring at the branch base, so the owl glows in outline against the bright moon when lit. Cut the circle background in sections while preserving the narrow branch connection at the bottom, which is the only structural link between the owl and the outer ring.
See template →92. I Love USA Pumpkin Stencil
The text "I" stacked above a heart filled with an American flag pattern, then "USA" below it, makes up this patriotic pumpkin stencil: the flag-heart shows a grid of small stars on the left and horizontal stripe bars on the right, while the bold block letters are cut as open shapes. The letters and star shapes pierce through so the pumpkin glows with text and a star-field simultaneously. Cut the individual stars inside the flag-heart before removing the surrounding letter openings so the fine star shapes stay supported by the neighboring skin as long as possible.
See template →93. American Flag Heart Pumpkin Stencil
A heart-shaped American flag fills this hard-level pumpkin stencil, with the left half showing rows of five-pointed stars arranged in a grid and the right half showing horizontal stripe bars tapering as the heart curves toward the bottom point. Every star and every stripe bar is cut away as an open shape so the lit jack-o-lantern shows the heart glowing in a dense pattern of small lights. Cut each individual star point carefully before opening the stripe sections to the right, since the star grid is the most intricate area and needs surrounding skin intact for support.
See template →94. Mississippi Pumpkin Stencil
This pumpkin stencil cuts the outline of Mississippi as a single solid silhouette pierced entirely through the pumpkin wall. The western border is the most distinctive feature: a deeply notched, step-like edge tracing the course of the Mississippi River, while the right side drops in two clean vertical lines. Lit from inside, the whole state shape glows as one open window. Start your cuts along the jagged river edge, working in short strokes to keep each notch crisp.
See template →95. LOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
See template →96. Love Wins Pumpkin Stencil
A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges.
See template →97. Cartoon Monster Pumpkin Stencil
A stocky cartoon monster stands arms-up with a wide open mouth full of jagged teeth, crescent-shaped eyes beneath rectangular brow bars, and a shaggy body outline. The design uses a dense scatter of mid-size cutouts rather than one large opening, so the lit pumpkin shows the monster as a bright orange silhouette surrounded by black negative space. Carve the rectangular brow pieces and the two tiny crescent pupils first, since they are the smallest islands and easiest to pop out while the wall is still fully supported.
See template →98. Rearing Horse Pumpkin Stencil
A powerful horse rears up on its hind legs in this detailed pumpkin stencil, its flowing mane and arched neck rendered in sweeping cut-through lines while the body remains largely solid orange. Thin bridges of pumpkin between the leg cuts and the belly keep the composition intact, so light escapes in dramatic slashes rather than one big opening. Cut the fine mane strands at the top first before tackling the larger body sections, to avoid flexing those delicate cuts while the rest of the work is underway.
See template →99. Grinning Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face carved within a jack-o-lantern stencil: a swirling curly stem at the top, two angled brow-cuts above a large square single-nostril eye, and a wide-open mouth whose upper lip forms a jagged row of sharp saw-tooth teeth with a single large central fang dropping from above. The mouth cavity is enormous relative to the face, giving the design its signature frenzied look. Cut the curl of the stem and the tiny eye detail first, then the saw-tooth teeth from the outer corners inward so the narrow points stay supported until the large mouth cavity is opened last.
See template →100. Sugar Skull Pumpkin Stencil
This sugar-skull pumpkin stencil features a circular skull face filled with symmetrical Dia de los Muertos ornamentation: two large almond-shaped eye sockets, a central floral cross motif above them, scrollwork tendrils curling outward on both cheeks, and a rectangular tooth-grid at the chin. The design carves as a mix of open negative spaces and solid orange bridges that define each decorative element. Cut the cheek scrollwork before removing the large eye sockets, since the thin curling lines are easier to control while the surrounding wall is still solid.
See template →
100 down — and there are dozens more pumpkin designs in the full library if you want to keep browsing.
Browse all pumpkin designs →