Advanced Pumpkin Cutouts
Looking for advanced pumpkin cutouts? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.
Beginner or pro, there's something on this page for you.
Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
Kawaii Mushroom Pumpkin Stencil
A kawaii-style mushroom character fills this hard pumpkin stencil, with a broad spotted cap, small horns or fins at the sides, and a round face below it showing large anime eyes and a tiny curved mouth. The cap spots are solid orange circles against a pierced cap background, and the face details are fine interior cuts within the solid round head. Carve the small circular spots on the cap before removing the large open cap area, so those circles have firm pumpkin wall behind them while you make the precise cuts.
Ghost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
Jack-o-Lantern Face Pumpkin Stencil
A grinning jack-o-lantern face carved onto a jack-o-lantern makes this a pumpkin-within-a-pumpkin design: a wide ovoid pumpkin shape with a stubby stem has a furious face of angled triangular eyes, heavy brow cuts, and two rows of large zigzag teeth separated by a thick horizontal lip band. All the face features are cut through as open shapes. Carve the inner tooth gaps first, since they sit between two rows that span the widest open area, then release the eye triangles and brow cuts last to keep the upper face stable.
Snarling Wolf Face Pumpkin Stencil
A wolf face stares straight forward in this hard pumpkin stencil, its large triangular ears open and pierced, its almond-shaped eyes cut through, and its muzzle parted to reveal a fanged open mouth. The fur around the face is rendered as jagged zigzag edges, and the nose bridge and cheek ruff details are a mix of solid and cut sections that read as fur texture when lit. Carve the two thin lightning-bolt-shaped brow marks above the eyes before removing the larger eye cutouts, as they are the most fragile narrow strips in the design.
Howling Wolf Moon Pumpkin Stencil
A wolf howling at a large crescent-shaped moon fills this hard pumpkin stencil, with a trio of jagged pine trees to the left and the wolf's body set as a solid orange silhouette inside the open pierced moon arc. The moon itself is the glowing background that frames the wolf and trees, while the animal and pines remain as uncut pumpkin skin. When carving the pine tree segments, cut each zigzag branch notch one at a time using a small detail blade, since the tight repeated angles along the tree edges are easy to over-cut and merge into a single straight line.
Rising Zombies Pumpkin Stencil
Two zombie figures rising from the ground face inward in this hard pumpkin stencil, their ragged arms reaching upward and their tattered lower bodies emerging from earth at the base of a tall oval negative space. The zombies read as solid orange silhouettes flanking a large central open oval, so the lit jack-o-lantern glows through that oval while the outstretched zombie arms and rotting fingers stand out in relief. Carve the finger details at the top of each arm before cutting the large central oval, as the fingers are the most fragile elements and benefit from the extra pumpkin mass still in place.
West Virginia Pumpkin Stencil
West Virginia's distinctive outline is one of the most jagged of all state stencils, with the panhandle jutting sharply upward from the north and a second narrow protrusion to the northeast, while the southwestern border follows a highly irregular path of peaks and valleys. The entire shape is pierced as one complex cutout. Because of the two thin panhandle arms, cut those narrow protrusions first with a detail blade while the body is still solid and can absorb any flex, then open the main body from the center outward.
Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
Scarecrow Pumpkin Stencil
A simple, cartoonish scarecrow stands with arms outstretched on this hard pumpkin stencil, wearing a wide-brimmed hat and showing a squiggly grimace for a mouth. The body and hat are solid pumpkin flesh while gaps between the outstretched arms, the ragged tunic slashes, and the stick post below are all cut through. The thin neck post connecting the head to the body is the most fragile element; complete all arm and tunic cuts before touching the area around that connector to keep the head from separating prematurely.
Snail Pumpkin Stencil
A giant snail is the surprising subject here: a segmented spiral shell packed with dashed arc cutouts occupies most of the design, while the snail's body stretches out to the right and two small eyestalks rise from the head. The shell is built from concentric broken rings that leave thin solid bridges between segments, and the effect when lit is an intricate circular lantern orbited by a slow-moving creature. Cut the outermost arc segments of the shell first and work inward toward the central solid disc so the bridges hold until last.
UFO Flying Saucer Pumpkin Stencil
A cartoon flying saucer floats in this hard-difficulty pumpkin stencil, with a domed cockpit at the top showing a simple ghost-like alien face inside. A wide flattened disc body below features a row of oval porthole cutouts around its rim and sweeping curved rings beneath. The alien inside the dome and the porthole ovals are each separate pierced shapes. Cut the dome interior and the alien face details before opening the porthole ovals around the rim, so the dome remains attached and stable while you navigate the narrow disc body.
Coronavirus Pumpkin Stencil
This hard-difficulty pumpkin stencil depicts a coronavirus particle rendered as a circular arrangement of spike proteins: round-tipped stalks radiate outward from a central ring of crescent shapes, all cut as individual floating pieces within a large open surround. When lit, the scattered spikes and interior crescents glow as a constellation of shapes against the dark pumpkin. Carve the inner crescent cutouts at the center first, then work spike by spike outward, since removing the outer spikes early can destabilize the central ring.
Cartoon Dragon Pumpkin Stencil
A small cartoon dragon perches in a rounded frame in this hard pumpkin stencil, showing a round-headed wyvern with stubby wings fanned behind it, a curled foreleg, and a spiky crest along the top of the frame. The body and wing details are a mix of open pierced sections and thin solid bridges, so the lit jack-o-lantern reveals the creature's rounded features glowing warmly inside the frame. Carve the two small oval eye cutouts and the tiny claw details first before removing the larger background areas, to keep the stencil stable during the fiddly work.
Wisconsin Pumpkin Stencil
Wisconsin's distinctive outline fills the center of this pumpkin stencil, its jagged northern coastline and small Door Peninsula peninsula cut cleanly away to glow as a single solid state shape when lit. The entire interior of the state boundary is pierced through, casting a bold Wisconsin silhouette in light against the dark pumpkin. Score the sharp indentations along the Lake Superior shoreline slowly, since those tight interior corners are where the blade most easily wanders and widens the cut.
Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
Farm Tractor Pumpkin Stencil
A side-view farm tractor fills this hard-level pumpkin stencil: a large rear wheel with a circular hub and cross-spoke cutouts, a small front wheel with a curved fender, a boxy cab section with cut-out windows, a squared hood, and a vertical exhaust stack. The rear wheel dominates the lower half of the composition and has the most intricate internal detail. Cut the cab windows and exhaust stack openings first while the pumpkin is still fully intact, then work on the large rear wheel spokes last, since removing them will flex the surrounding skin considerably.
Teddy Bear Pumpkin Stencil
A seated teddy bear with tattered, drip-edged fur fills this hard-level pumpkin stencil: a round head with small round ears, two circular cheek spots, a nose-and-muzzle cutout, and a tummy split into two glowing panels flanked by small round paws. The ragged fur silhouette along the top of the head and across the body creates dozens of short, jagged points that must stay connected. Work from the center facial features outward, and avoid pressing too hard on the bear's narrow fur-tip points so they do not snap before the larger belly sections are removed.
Tennessee Pumpkin Stencil
Tennessee's wide, almost rectangular state outline is cut as a single open silhouette in this pumpkin stencil, with the stepped notch on the upper-left edge and the jagged western corner representing the state's distinctive border. When lit, the entire shape glows as one bold window of light. Because the outline follows an irregular path with several sharp interior corners along the southern border, score each angle carefully and complete one full corner before moving to the next to avoid cracking the skin at the tight turns.
Trump 2024 Pumpkin Stencil
Bold military stencil-style lettering spells "TRUMP" on the top row and "2024" flanked by two five-pointed stars on the bottom row of this hard pumpkin stencil. Each letter and numeral is a thick open outline with interior counters preserved as solid pumpkin islands. The two stars at the sides of "2024" are each pierced through as open silhouettes. Cut the enclosed counters of rounded letters and numerals first (the interior of the P, the U loops, and the 0 counter in 2024), then cut each letter and numeral outline, saving the two star shapes for last.
Mummy Pumpkin Stencil
A mummy figure wrapped in overlapping bandage strips stands upright in this hard pumpkin stencil: a round hooded head with two crescent eye cutouts and small circle pupils, a neck section, and a torso crisscrossed with diagonal and horizontal bandage-strip cutouts that create an intricate lattice pattern in the lower half of the design. Lit from inside, the bandage lattice glows as a grid of bright lines framed by solid pumpkin strips. Begin with the two eye crescents and pupil circles in the face, then work downward through the lattice section one row at a time to keep the remaining skin stable.
Texas Pumpkin Stencil
Texas's iconic state outline is cut as a single open silhouette in this pumpkin stencil: the rectangular panhandle at the upper left, the broad body tapering to the pointed southern tip, the ragged Gulf Coast along the eastern lower edge, and the squared-off western side. Lit from inside, the whole shape glows as an unmistakable Lone Star State window. The most demanding section is the lower Gulf coastline, where repeated small indentations create a saw-tooth edge; make these cuts last and use a narrow blade to follow the fine detail without breaking the points.
Arched Black Cat Pumpkin Stencil
A Halloween black cat with its back dramatically arched and tail curling overhead covers this pumpkin stencil. The body is rendered with bold tribal-style linework: parallel flowing stripes run along the spine and haunches, leaving thin curved bridges of solid pumpkin wall between each cut channel. The face features large round eyes with pointed eyebrows and small whisker marks. Carve the eye circles early while the surrounding face structure is solid, then progress along the stripe channels from front to back so you don't weaken the frame before the detailed head is complete.
Stegosaurus Pumpkin Stencil
A cartoon stegosaurus with a round friendly face, four chunky legs, and a row of large diamond-shaped back plates fills this hard pumpkin stencil. The body is carved as a wide open pierce, the back plates are pierced individually above it, and the toes and facial details are fine cut-outs. When lit, the dinosaur glows as a bright segmented shape with the plates hovering above the silhouette. Carve the face details and tiny toe lines before removing the large body section, since the body cut-through will flex the pumpkin wall and make those small details harder to control.
Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
Coming Soon Baby Pumpkin Stencil
This pumpkin stencil spells out "COMING SOON" in chunky rounded letters across two rows, with a pair of baby footprints replacing the two O letters in the word SOON, and a small heart dotting the I above. The letters are each bold and thick, with the interiors of rounded letters like C, G, and the zero-like Os cut away while the outlines stay solid. When carved and lit, the baby-announcement message glows warmly across the pumpkin face. Cut the two enclosed letter counters in COMING first before moving to the footprint shapes, which have the most delicate toe-dot details.
Pirate Pumpkin Stencil
A grinning pirate face topped by a tricorn hat is the subject of this hard pumpkin stencil: a skull-and-crossbones badge on the hat brim, a round-brimmed hat spreading wide, a leather eye patch over one eye, a weathered face with deep laugh lines, a broad toothy smile, and a pointed goatee at the chin. The lit design reveals a cheerful swashbuckler portrait full of character. Cut the small skull-and-crossbones elements on the hat first while the surrounding skin is firm, then work down through the face, saving the wide hat brim last.
Male Portrait Pumpkin Stencil
A male portrait rendered in spare, angular linework fills this hard pumpkin stencil: a large angular head shape, a distinctive widow's peak hairline, deep-set eye sockets with small cutout irises, a long straight nose, and a square jaw with a chin dimple. The design uses wide open negative shapes separated by just a few thin structural bridges, so the lit portrait reads as a bold, high-contrast face. The narrow bridge between the nose and the upper lip is the most vulnerable point, so score it lightly before making any cuts on either side of it.
God Bless the USA Pumpkin Stencil
Bold block lettering spells out "GOD BLESS THE U.S.A." across two lines, with small five-pointed stars separating the letters in the lower line. The upper row uses chunky serif-style caps and the lower row uses even larger, slightly decorative capitals. Every letter interior is pierced through so the full phrase blazes when the pumpkin is lit. Keep the thin straps of orange between adjacent tall letters intact as you carve, since they carry the structural load of the entire upper row.
Semi-Truck Pumpkin Stencil
A classic eighteen-wheeler semi-truck cab shown in side profile fills this hard pumpkin stencil: a tall exhaust stack, a flat-topped sleeper cab with rectangular window cutouts, a step board, side mirrors, dual front headlights, and two large open wheel wells with small oval lug-nut details. The design reads as a cleanly geometric vehicle silhouette when lit, with the cab windows and wheel openings glowing brightest. Start with the cab window rectangles and the small mirror cutout before opening the large wheel wells, which would flex the lower pumpkin skin if cut first.
Triceratops Pumpkin Stencil
A chubby cartoon triceratops in a walking pose fills this hard pumpkin stencil: a large frilled head with three prominent horns, two small oval nostril dots and a crescent eye below the frill, a round body, four chunky legs with pointed toe claws, and a short upturned tail. The frill at the back of the head is an open silhouette that glows as a scalloped arc. Cut the three horn outlines and the two small nostril dots first before the broader body and leg cutouts, as the nostril dots are isolated and easiest to control while the pumpkin is still intact.
Skull Face Pumpkin Stencil
Two large angular eyes with curling inner-corner details and cocked brows form the upper half of this skull pumpkin stencil, with a small paired nasal cavity below and a wide clenched-teeth mouth at the bottom, all cuts floating separately on an otherwise solid pumpkin face. When lit, the glowing eyes and jagged teeth give the jack-o-lantern an intensely menacing expression. Cut the thin curling details inside each eye first, while the pumpkin is still rigid, then open the eye sockets, nasal holes, and wide tooth row in that order to keep the face from flexing during fine work.
Coiled Snake Pumpkin Stencil
A coiled snake in an S-curve fills this hard pumpkin stencil, its body broken into roughly twenty irregularly shaped scale-pattern segments separated by thin cut lines, with a small triangular head visible at the upper left and the tail tapering to a narrow point at the bottom. When lit, the gaps between scale segments glow white-hot against the orange pumpkin bridges, making the snake's banded pattern pop. Start cutting at the tail tip, where the segments are smallest and most fragile, then work up the body toward the larger mid-coil pieces.
Vampire Face Pumpkin Stencil
A vampire face shown from the shoulders up dominates this hard pumpkin stencil, featuring a high widow's peak hairline with two swept horns of hair, large pointed ears, a monocle over one eye, a hawkish nose, a thin mustache, and a jagged collar below the chin. Each facial feature is a separate cut-through piece held apart by solid pumpkin lines, so when lit the face reads as a patchwork of glowing angular shapes. The monocle circle is the most isolated piece; carve it first before the eye socket cuts nearby remove the surrounding support.
Scary Text Pumpkin Stencil
The word "Scary" is rendered in a dripping, horror-movie hand lettering style and set inside a speech bubble outline made of jagged, claw-like strokes in this hard pumpkin stencil. The letter forms themselves are cut through while the speech bubble border stays solid, so candlelight glows through the word while the ragged bubble outline frames it in orange. The thin descenders on the letters, particularly the tail of the "y" and the base of the "S," are the most fragile bridges; cut those last after the letter interiors are already free.
Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
Crouching Werewolf Pumpkin Stencil
A stocky werewolf crouches forward in an aggressive stance in this hard pumpkin stencil, with a spiky mane of fur bristling along its back, a snarling open-mouthed face showing sharp teeth, and thick clawed legs ready to spring. The design uses open cuts for the face interior and the gaps between the leg and body fur tufts, with solid pumpkin ridges defining each tuft shape when lit. Cut the teeth row inside the open mouth before removing the surrounding head-area cuts so the small tooth gaps remain stable.
Haunted House Moon Pumpkin Stencil
A tall haunted mansion with jagged roofline towers, arched windows, and a wide front door fills the center of a large circular moon cutout in this pumpkin stencil. Two bats flank the upper towers, and tufts of grass sprout at the base. The moon circle is the main open cut, while the house is retained as pumpkin wall, glowing orange against the dark void. Carve the rectangular window openings and the door arch before cutting the surrounding moon circle, so the house structure has support while you work the fine edge details.
Witch Silhouette Pumpkin Stencil
A full-length witch silhouette fills this jack-o-lantern pumpkin stencil: pointed hat, flowing robes, and a broomstick are all rendered as pierced cut-through shapes, with the surrounding robe fabric left as solid orange pumpkin wall. On the lit pumpkin the broomstick and cloaked figure read as glowing orange forms against a dark background. The witch's hat brim is a narrow horizontal bridge; cut that piece last and work inward from the wider robe sections to keep it from snapping under tool pressure.
Witch on Broomstick Moon Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
Spooky Text Pumpkin Stencil
The word "Spooky" is carved in bold bubbly lettering with each letter outlined as a cut-through shape on this Halloween pumpkin stencil. The two O's feature skull-like eye holes inside them, and drip lines hang from the letters below. Curling ribbon flourishes arc above and below the text, all pierced through. Lit from inside, the letters glow with dark gaps forming the decorative interior details. Take care to preserve the thin drip connections between letters, as those links keep each letter floating in place on the pumpkin wall.
Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
Skeleton Ghost Pumpkin Stencil
A skeletal ghost charges forward with clawed hands outstretched, its skull face showing hollow eyes and a jagged open mouth, the lower body dissolving into flowing tattered shroud wisps in this hard pumpkin stencil. The cut pieces include the eye and mouth openings in the skull, the gaps between the outstretched claw fingers, and several large void areas within the billowing shroud body. The thin strips between the claw fingers are fragile; cut each finger gap fully before moving to the large shroud openings below.
Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
Cute Starfish Pumpkin Stencil
A stylized starfish with five rounded arms and a cute cartoon face, including two large round eyes with small lashes, a button nose, and a gentle smile, sits symmetrically centered in this hard pumpkin stencil. The arm openings and facial features are cut through while the narrow bands between the arm segments stay solid, framing the starfish shape clearly when lit. The thin band between the two eye holes is the most vulnerable bridge; cut the right eye last so you can brace the section from both sides during that final cut.
Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
Skeletal Ghost Pumpkin Stencil
A skeletal ghost figure with a domed, skull-like head, jagged mouth slits, and broad swept wings dominates this pumpkin stencil. The design carves as widely spaced curved pierce-through sections that fan across both sides, leaving bold orange bridges to define the creature's torso and face. Lit from inside, the jack-o-lantern reads as a dark specter bursting outward. Cut the inner face details first before tackling the large wing panels so shifting your grip doesn't crack the delicate center column.
Tribal Black Cat Pumpkin Stencil
An arched black cat with its back up and tail raised high forms this hard pumpkin stencil, drawn in a tribal-tattoo style with flame-shaped fur tufts along the spine, a narrow elongated face with almond-shaped eyes, and wispy leg strokes that taper at the paws. The many curved, pointed cuts leave thin pumpkin bridges between them that form the cat's body outline when the jack-o-lantern is lit. The wispy tail tip at the very top is the most isolated piece; cut it before removing the large body negative-space below.
Silly Monster Pumpkin Stencil
A shaggy round monster with a small zigzag hair antenna on top, wide round eyes, a grinning row of rectangular teeth, and two outstretched hands with four or five digits fills this funny pumpkin stencil, with about eight to ten interior pierced slashes representing the fur texture along with the facial features and foot claws. The lit pumpkin reveals the entire creature in warm orange silhouette against a dark background. Cut the large central body void first, then work through each interior fur slash and claw detail, leaving the two floating hand cutouts for last.
Snarling Rat Pumpkin Stencil
A detailed rat rearing up on its hind legs fills this hard pumpkin stencil, posed with clawed front paws raised, mouth open in a snarl, and a long curling tail sweeping around the lower body. Unlike the simpler silhouette rat in this collection, this design uses internal cut lines to carve fur texture, claw separations, and an open mouth, leaving thin pumpkin ridges that define the anatomy when lit. Cut the individual claw slots in the front paws first so those delicate tips are still surrounded by solid pumpkin.
Ghost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
See-No-Evil Monkey Pumpkin Stencil
The see-no-evil monkey emoji is rendered as a wide face with two large hands pressed over the eyes and two banana-shaped ears flaring out, with a broad smile, round nose dots, and small cheek details visible below the hands in this hard pumpkin stencil. The overlapping hand fingers create a dense grid of narrow cut channels across the upper half of the design. Work the individual finger slots from the center outward so each completed cut is braced by uncut pumpkin on at least one side.
Sea Turtle Pumpkin Stencil
A sea turtle viewed from above fills this pumpkin stencil, with four swept-back flippers and a dome-shaped shell covered in roughly twenty interlocking polygonal plates, each plate a separate cut piece separated by thin lines of uncut pumpkin. The resulting jack-o-lantern glows through every shell segment individually, mapping out the turtle's scute pattern in orange-framed light. Cut the smallest outer-edge shell plates first since they have the least surrounding support, then work inward toward the larger central scutes.
RIP Graveyard Pumpkin Stencil
A moonlit graveyard scene arches across this pumpkin stencil, with a large cracked tombstone bearing the letters RIP at center, flanked by two cross-topped stones and tufts of grave grass below, all framed inside a curved arch at the top. The composition is pierced so the entire scene cuts away from the pumpkin wall and glows as one large backlit picture. Cut the letter shapes inside RIP first with a detail blade, then work outward through the tombstone cracks, cross details, and grass tufts before removing the large arch framing area last.
Its a Girl Pumpkin Stencil
The phrase "it's a girl" in chunky lowercase lettering fills this pumpkin stencil, with a small heart shape tucked below the word "girl" to complete the baby announcement message. Each letter and the heart are cut-out shapes, many with enclosed counters that require careful handling. The interior dot of the letter i in "girl" is the trickiest floating island: cut around it last and keep the skin disc in place using a toothpick or small skewer pressed through the back of the pumpkin wall to hold it.
Rose Bloom Pumpkin Stencil
A fully open rose bloom fills this pumpkin stencil, rendered as a set of curved, teardrop-shaped petals radiating from a tight spiral center. The cut-out segments are separated by thin pumpkin-flesh bridges that hold the design together, so when lit the candle glow traces the swirling petal arrangement. Carve the smallest center pieces first to avoid cracking the surrounding petals, and keep a damp cloth nearby to prevent the thin bridges from drying out mid-session.
Funny Monster Pumpkin Stencil
A round-bodied cartoon monster with an oversized fuzzy head, two large circular eyes, a wide fanged grin, spiky hair tufts, stubby arms raised to the sides, skinny stick legs, and round feet fills this pumpkin stencil. The creature's oval eye circles and the spaces between the arms and body are cut through, while the chunky body silhouette stays as solid orange skin. Carve the two circular eye openings and the small round nose dot at the top before cutting the body perimeter, so you can brace the knife against solid material.
Mummy Face Pumpkin Stencil
A mummy face fills this pumpkin stencil, built from horizontal overlapping bandage strips that cross the forehead, bridge over hollow oval eye sockets, and wrap beneath a grimacing mouth with small exposed teeth. The bandage layers are the solid orange pumpkin wall while the gaps between them are pierced through, so candlelight reads as stripes of light across a dark face. Cut the eye socket ovals first, then work upward through the bandage gaps from the chin to the crown, keeping each horizontal bridge intact until the cut on either side of it is complete.
Zombie Hands Pumpkin Stencil
Two zombie arms thrust upward side by side on this zombie pumpkin stencil, each one emerging from a ragged torn sleeve at the base, with elongated bony fingers splayed wide and dripping flesh hanging from the wrists. The arms are the solid orange wall while the space around them is pierced away, so the pair of grasping hands glows against a dark background. The skinny finger tips are the most vulnerable pieces, so keep a finger pressed gently on each tip from the outside as you cut around it to prevent the thin point from breaking off.
Police Badge Pumpkin Stencil
A five-pointed star with a horizontal banner across its center spelling out POLICE in block capital letters makes up this pumpkin stencil, styled after a classic law-enforcement badge. The interior of the star points and the letter counters are cut through, while the banner background and star outline remain as solid skin. The enclosed center of the letter O is the trickiest piece: slice around it last and press a toothpick through the back of the pumpkin wall to pin the small oval disc in place.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger design fills this pumpkin stencil: a grinning skull topped by a pirate hat bearing a tiny skull-and-crossbones badge sits above two crossed cutlass swords with curled hand-guards. The eye sockets, the hat badge, the small triangular nose cavity, and the gaps between the sword blades are all pierced through. Cut the miniature hat badge first since it is the most delicate isolated element, then the eye sockets and sword gaps, before finishing with the outer hat and blade silhouette.
Rose Pumpkin Stencil
A full rose with a spiraling center bud, layered outer petals, and a thin stem with two small leaves is the subject of this flower pumpkin stencil. The petals are rendered as irregular organic cut sections that radiate from the tight center spiral outward to ragged outer edges, while the stem and leaves below are smaller separate pieces. Lit from inside, the solid pumpkin between cuts reads as petal ridges framing windows of light. Cut the innermost spiral bud sections first so the outer petals remain attached and sturdy while you navigate the tightest curves.
Rainbow and Clouds Pumpkin Stencil
This pumpkin stencil features a rainbow of four concentric arcs rising above two puffy clouds, with scattered stars and small circles floating around the composition. The clouds and stars are separate pierced cutouts, and the arc bands are cut through with thin solid bridges between them, creating a whimsical scene that glows warmly from a candle or LED inside. Cut the small stars and round circles first while the wall is firm, then remove the cloud shapes, and finish with the long sweeping arc cuts so the composition stays supported throughout.
Raising Hands Emoji Pumpkin Stencil
Two open hands with spread fingers are raised side by side on this emoji pumpkin stencil, each palm facing forward with small rectangular cuff shapes below the wrists. Four small triangular sparkle shapes are arranged above the hands in a row. All elements are pierced through so the lit jack-o-lantern shows a bright raising-hands celebration scene. Cut the four small triangles at the top first while the wall is thickest, then remove the cuff rectangles, and finish by cutting around the finger contours of each hand last.
T-Rex Pumpkin Stencil
A fleshed-out T-rex stands upright in this dinosaur pumpkin stencil, with a large skull showing serrated teeth, tiny forelimbs with claw tips, a muscular body, and thick hind legs with three-toed feet rendered as solid orange pumpkin wall. The spaces between and around the figure are cut through, so the lit jack-o-lantern silhouettes the dinosaur in warm orange against a glowing background. Cut the narrow gaps between the forelimb claws and the small toe gaps first before opening any of the large surrounding sections, as those tight details are easier to control while the wall is fully rigid.
Soccer Ball Pumpkin Stencil
A soccer ball rendered as a flat stencil pattern takes up the full face of this pumpkin carving design, with a central pentagon surrounded by curved hexagonal panels that radiate outward to the edges. The pentagon and several panel sections are cut through, while the curved connecting lines between panels remain as solid orange bridges, recreating the look of a classic black-and-white ball when lit. Carve the central pentagon first, then cut each surrounding hexagonal section in a clockwise order to keep even tension on the skin bridges.
Velociraptor Pumpkin Stencil
A snarling velociraptor lunges forward on this dinosaur pumpkin stencil, its open jaws showing individual teeth, forelegs raised with curved claws, and a long stiff tail arcing behind. The design uses a mix of pierced negative space and thin pumpkin-wall bridges to define the body segments, so the lit jack-o-lantern shows the raptor as an orange figure ringed by dark gaps. Start by cutting the smallest interior tooth shapes and claw details before removing the large body sections, so the surrounding wall keeps the stencil stable throughout.
Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
Dracula Pumpkin Stencil
A bald, hollow-cheeked Dracula figure holds a grinning carved jack-o-lantern to his chest in this hard vampire pumpkin stencil. The face has arching brow ridges, deeply cut cheekbones, fang-edged lips, and small pointed ear nubs. Below the chin the figure's open cape forms a bat-wing shape, and the jack-o-lantern the vampire cradles shows its own triangular eyes and jagged smile as inner cutouts. The composition creates two overlapping scenes: a vampire face above and a glowing pumpkin face below. Work from the outside edge of the cape inward, and carve the inner pumpkin face last to avoid over-thinning the chest wall.
Skeleton Hands Heart Pumpkin Stencil
Two skeletal hands with knuckle-ridge cuts reach upward and inward to frame a heart shape in the negative space between them in this hard-level pumpkin stencil, each finger outlined by rows of small rectangular cut-outs that read as bone segments when lit. The spaces around and between the fingers are cut away so the glowing pumpkin shows the hands as a warm orange lattice of bone detail around the central heart void. Cut the small rectangular knuckle cuts across all fingers before removing the larger surrounding background so every finger stays rigid while you work the fine detail.
French Bulldog Pumpkin Stencil
A front-facing French Bulldog puppy sits with large upright ears, wide cartoon eyes with round pupils, a flat pushed-in nose, spot-marked cheeks with tiny freckle dots, and chunky paws crossed at the bottom in this dog pumpkin stencil. The cut-away areas around the ears, inside the eyes, and across the chest give the glowing jack-o-lantern a strong portrait effect with plenty of warm orange pumpkin skin defining the Frenchie's wrinkled face. Carve the freckle dots and pupil circles before the ear openings so the delicate face detail is cut while the surrounding skin is at its firmest.
Parasaurolophus Pumpkin Stencil
A cute bipedal Parasaurolophus dinosaur faces right in this hard-level pumpkin stencil, with the signature backward-sweeping cranial crest arching above its round eye, a chunky body sectioned by organic blob-shaped cut-outs along the dorsal ridge and belly, two short front arms with clawed fingers, and sturdy hind legs. The blob-shaped body cut-outs stay open so the dinosaur glows in a spotted pattern when lit, while the outer silhouette stays solid. Cut the small claw details on the fingers before removing the large body sections so the arm area keeps its rigidity while you work.
Cruise Ship Pumpkin Stencil
A large cruise ship viewed from a slight bow-angle fills this hard pumpkin stencil. Four tall rectangular smokestacks rise from the upper deck, the bridge superstructure runs along the top, and five circular portholes line the hull below the waterline. The design reads as a series of rectangular and circular cutouts separated by solid pumpkin strips. When lit, the port holes and superstructure windows glow individually like a ship at sea. Carve the five round portholes first since circular cuts benefit most from a fresh blade, then work upward through the rectangular deck openings.
Pug Pumpkin Stencil
A grinning pug puppy sits upright in this detailed pumpkin stencil, its flat wrinkled muzzle, round cheek circles, floppy ears, curled tail, and stubby paws all rendered in interlocking cut shapes. The pug's body is largely solid orange pumpkin skin held together by thin bridges between cut sections, so the face details and surrounding silhouette glow from behind. Carve the two circular eye areas and the small nose last to avoid weakening the bridges around the mouth before the outer body is complete.
Sea Urchin Pumpkin Stencil
A stylized sea-urchin or crown-of-thorns creature gazes out from this hard-level pumpkin stencil, with five rows of triangular spines radiating above a cute wide-eyed face: two large round eyes accented by lash-like lines, two nostril dots, a small open mouth, and curved tentacle arms spreading at the bottom. Each triangular spine and the large rectangular tooth shapes are cut away so candlelight shoots upward through the spines while the eyes and mouth glow below. Pierce the tiny nostril dots and lash-line cuts first while the face is still fully rigid.
Witch on Moon Pumpkin Stencil
A tall oval moon dominates this hard witch pumpkin stencil, with a thin vertical broomstick cutting through the center and a small witch figure silhouetted at the bottom, surrounded by four-pointed star cutouts. The moon is carved as a large open oval, so the broom handle remains as a solid pumpkin bridge crossing the glow. Stars scattered inside and outside the moon add sparkling pinhole light around the scene. Cut the large moon oval first to establish the dominant glow, but do not sever the broomstick bridge at the center until the very last pass.
New York Pumpkin Stencil
New York's iconic silhouette is the subject of this hard state pumpkin stencil. The broad rectangular upstate body tapers down on the left into the Hudson Valley, then Long Island extends as a long narrow arm reaching to the right, while the Adirondack notch creates a jagged step on the upper-right edge. Carved as a single large open cutout, the state glows against the dark pumpkin with Long Island's thin tail as the most structurally fragile element. Cut the main body first and leave the Long Island peninsula for the final stroke to prevent it from snapping during earlier passes.
Mouse Skull Pumpkin Stencil
Two large round ear-shaped circles top a grinning skull face in this hard skull pumpkin stencil, the whole design dripping with melting-wax details that hang from the ears and chin. The skull's hollow round eyes and triangular nose are cut through, while the jagged smiling mouth and drip channels below the face create a pattern of narrow glowing slits. Lit inside a jack-o-lantern, the ears glow as two bright round openings above a menacing skull expression. Carve the two large ear circles first since they are structurally independent, then work down through the drips before tackling the fine interior face cuts.
Great White Shark Pumpkin Stencil
A great white shark lunges in profile across this animal pumpkin stencil, jaws open to reveal a row of serrated teeth, a round dot eye, a prominent dorsal fin, a pair of pectoral fins mid-body, and a forked tail sweeping back to the right. The body interior is cut away in a large open section while the teeth, fins, and eye detail stay as solid bridges of pumpkin skin, letting candlelight define the shark's menacing outline from within. Cut the mouth and individual tooth points before opening the large body cavity so the head stays anchored while you work the fine detail.
Motorcycle Pumpkin Stencil
A side-profile motorcycle fills this hard pumpkin stencil with mechanical detail: the front fork and handlebars, a sculpted fuel tank, streamlined seat fairing, and two large concentric-ring wheels. The design uses a mix of solid pumpkin bridges and open cut areas so the bike reads as a crisp silhouette when the jack-o-lantern is lit. The thin fork tubes and the thin strip separating the seat from the rear fairing are the most fragile elements. Carve the two large wheel ring sections first to establish the bottom of the composition before working inward through the frame details.
North Carolina Pumpkin Stencil
North Carolina's distinctive silhouette fills this state pumpkin stencil: a wide, roughly trapezoidal body with a notched southwestern corner, a stepped northern border, and the ragged Outer Banks barrier-island coastline jutting into the Atlantic on the right. The entire state outline is pierced through as one connected opening so candlelight floods through the recognizable shape. Because the Outer Banks coastline is the most intricate edge on this stencil, cut that section last using short, controlled strokes to keep the thin peninsular points intact.
Opossum Pumpkin Stencil
A cartoon opossum crouches in profile across this hard-difficulty pumpkin stencil, its oversized round eyes and small pupils peering out, tall rounded ears pricked up, a plump body with scruffy fur texture, and tiny clawed feet extending below. The large dark body mass is carved away while the ring-shaped eye outlines and a few scattered fur marks stay solid, creating a bold silhouette that reads well even without a light source. Cut the circular eye rings before removing any surrounding flesh so they keep their structural support.
Palm Trees Pumpkin Stencil
Two palm trees of different heights rise from a shared sandy island base in this pumpkin stencil, the taller centered tree and a shorter leaning tree to the left each sporting fronds with individual leaflet-cut fingers spreading wide at the top. The negative space around the trunks and through the frond fingers is cut away, leaving the trunk outlines and leaflet ribs as solid orange bridges so the whole composition glows as a backlit tropical scene. Cut the individual frond leaflet gaps before removing the larger surrounding background so the frond tips never lose support from the pumpkin skin beneath them.
Perched Raven Pumpkin Stencil
A perched raven faces slightly upward in this full-body pumpkin stencil, with ruffled neck feathers rendered as jagged white-space cuts, a round dot eye, a short hooked beak, and scaled talons gripping a branch stub at the base. The bird's silhouette stays as solid pumpkin skin while the internal feather texture and eye dot are pierced through, creating a layered glow effect where the cuts read as bright highlights within the dark bird shape. Carve the tiny eye dot and the individual feather slashes before removing the larger body background to keep the piece stable.
Black Cat Pumpkin Stencil
A sly Halloween black cat stands upright in this hard pumpkin stencil, its body a combination of carved-open channels and solid pumpkin masses that together read as fur texture. The tail curls upward into a spiral behind the cat, and the whisker area beside the face consists of short, delicate radiating spikes that must stay intact. When lit, the cat's slitted eyes and facial details glow as narrow cuts within the solid face mass. Carve the large body cavities first, then finish the face and whisker spikes with a fine blade to avoid tearing those thin projections.
Oklahoma Pumpkin Stencil
Oklahoma's silhouette stretches wide in this state pumpkin stencil, showing the long panhandle arm extending to the left, a nearly rectangular main body, and the jagged stepped southern border that traces the Red River. The interior is cut as one open shape, making the panhandle the defining visual element that distinguishes Oklahoma from any other state design. Because the panhandle is long and narrow, cut it first while the surrounding pumpkin skin is still firm, using a thin blade and steady outward strokes to keep the arm from cracking.
Flying Saucer Pumpkin Stencil
A classic flying saucer seen from a three-quarter angle fills this hard space pumpkin stencil. The domed cockpit on top, the wide flat disc with a raised rim, three small round indicator lights on the underside, and three diverging tractor-beam rays below all read clearly as carved shapes. The beam rays are solid pumpkin strips between large open triangular cutouts, so lit from inside the beam glows as three bright triangular shafts pointing downward. Carve the three beam triangles first since they are the largest open areas, then work upward through the disc details and finish with the small circular indicator lights.
Cartoon Owl Pumpkin Stencil
A round, wide-eyed cartoon owl stares straight out from this animal pumpkin stencil, its large circular eyes each filled with a solid crescent pupil, two pointed ear tufts raised above the head, stubby wing tips at the sides, a triangular beak at center, and three rows of curved feather-scale cuts across the belly. The eyes and belly scales are pierced through while the owl body and face remain solid, so candlelight picks out the layered feather pattern in warm rows of light. Cut all the small belly-scale crescents before tackling the eye openings to keep the face rigid while you work the detail.
Spiky Spider Pumpkin Stencil
A front-facing spider with a cartoon scowl and spiky, porcupine-like hair fills this hard spider pumpkin stencil. The round, spiky abdomen is encircled by a ring of radiating spike-like projections, and four angular legs extend from each side within an outer octagonal border. The face detail consists of two teardrop-shaped eyes and a frowning mouth, all carved as open shapes inside the solid round body. When lit, the spiky halo around the body glows intensely. Carve the outer octagonal border ring first, then the leg pairs, before finishing the delicate face cutouts inside the central body.
Owl on Moon Pumpkin Stencil
A compact owl perches on a branch inside a full-circle moon background in this hard-level animal pumpkin stencil, the bird shown front-facing with heavy-lidded crescent eyes, a small triangular beak, three rows of curved feather-scale cuts on the belly, and stubby feet gripping the branch below. The circular moon background is cut away all around the owl, leaving the bird as a solid silhouette connected to the outer ring at the branch base, so the owl glows in outline against the bright moon when lit. Cut the circle background in sections while preserving the narrow branch connection at the bottom, which is the only structural link between the owl and the outer ring.
I Love USA Pumpkin Stencil
The text "I" stacked above a heart filled with an American flag pattern, then "USA" below it, makes up this patriotic pumpkin stencil: the flag-heart shows a grid of small stars on the left and horizontal stripe bars on the right, while the bold block letters are cut as open shapes. The letters and star shapes pierce through so the pumpkin glows with text and a star-field simultaneously. Cut the individual stars inside the flag-heart before removing the surrounding letter openings so the fine star shapes stay supported by the neighboring skin as long as possible.
American Flag Heart Pumpkin Stencil
A heart-shaped American flag fills this hard-level pumpkin stencil, with the left half showing rows of five-pointed stars arranged in a grid and the right half showing horizontal stripe bars tapering as the heart curves toward the bottom point. Every star and every stripe bar is cut away as an open shape so the lit jack-o-lantern shows the heart glowing in a dense pattern of small lights. Cut each individual star point carefully before opening the stripe sections to the right, since the star grid is the most intricate area and needs surrounding skin intact for support.
Mississippi Pumpkin Stencil
This pumpkin stencil cuts the outline of Mississippi as a single solid silhouette pierced entirely through the pumpkin wall. The western border is the most distinctive feature: a deeply notched, step-like edge tracing the course of the Mississippi River, while the right side drops in two clean vertical lines. Lit from inside, the whole state shape glows as one open window. Start your cuts along the jagged river edge, working in short strokes to keep each notch crisp.
LOVE Block Pumpkin Stencil
"LOVE" is arranged in a two-by-two block format, with "LO" on the top row and "VE" below, echoing the famous Robert Indiana sculpture. Each letter is cut through in rounded, chunky sans-serif type and the four characters together form a near-square composition. The internal counters of the "O" and the enclosed angle of the "V" need to be freed as islands; carve those interior pieces before removing the surrounding letter bodies so they stay fixed in place by the adjacent wall material.
Love Wins Pumpkin Stencil
A large bold heart dominates the design, split horizontally at its midpoint by a band of stencil text that reads "LOVE WINS" in thick block letters. The upper and lower halves of the heart are both pierced through, and the text band bridges the gap so the heart reads as one unified glowing shape when lit. Because the heart's two halves are each large open voids, carve them before the text strip; clearing the big areas first lets you see exactly how much wall support remains around the letter bridges.
Cartoon Monster Pumpkin Stencil
A stocky cartoon monster stands arms-up with a wide open mouth full of jagged teeth, crescent-shaped eyes beneath rectangular brow bars, and a shaggy body outline. The design uses a dense scatter of mid-size cutouts rather than one large opening, so the lit pumpkin shows the monster as a bright orange silhouette surrounded by black negative space. Carve the rectangular brow pieces and the two tiny crescent pupils first, since they are the smallest islands and easiest to pop out while the wall is still fully supported.
Rearing Horse Pumpkin Stencil
A powerful horse rears up on its hind legs in this detailed pumpkin stencil, its flowing mane and arched neck rendered in sweeping cut-through lines while the body remains largely solid orange. Thin bridges of pumpkin between the leg cuts and the belly keep the composition intact, so light escapes in dramatic slashes rather than one big opening. Cut the fine mane strands at the top first before tackling the larger body sections, to avoid flexing those delicate cuts while the rest of the work is underway.
Grinning Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face carved within a jack-o-lantern stencil: a swirling curly stem at the top, two angled brow-cuts above a large square single-nostril eye, and a wide-open mouth whose upper lip forms a jagged row of sharp saw-tooth teeth with a single large central fang dropping from above. The mouth cavity is enormous relative to the face, giving the design its signature frenzied look. Cut the curl of the stem and the tiny eye detail first, then the saw-tooth teeth from the outer corners inward so the narrow points stay supported until the large mouth cavity is opened last.
Sugar Skull Pumpkin Stencil
This sugar-skull pumpkin stencil features a circular skull face filled with symmetrical Dia de los Muertos ornamentation: two large almond-shaped eye sockets, a central floral cross motif above them, scrollwork tendrils curling outward on both cheeks, and a rectangular tooth-grid at the chin. The design carves as a mix of open negative spaces and solid orange bridges that define each decorative element. Cut the cheek scrollwork before removing the large eye sockets, since the thin curling lines are easier to control while the surrounding wall is still solid.
LGBTQIA2S+ Heart Pumpkin Stencil
A large bold heart silhouette is the main shape, with the text "LGBTQIA2S+" set in thick stencil letters running horizontally across the heart's center. The heart is cut in two halves separated by the text band, which itself is cut through except for the letter bridges. Lit from inside, the whole heart glows with the text reading as solid orange stripes across the opening. Carve the upper and lower heart halves before the text strip to keep the letter bridges from tearing while the wall is still reinforced.
Louisiana Pumpkin Stencil
Louisiana's distinctive boot-shaped silhouette is carved as a single large pierced opening, capturing the state's ragged northern border, the broad Mississippi River delta pushing into the Gulf on the southeast, and the narrow toe of the boot at the bottom right. The irregular coastal fringe along the bottom is the design's trickiest edge; use a detail blade and cut from the interior of the shape outward toward each peninsula tip to avoid snapping off the narrow delta fingers.
Lily Flower Pumpkin Stencil
A single lily blossom fills the design with five broad sweeping petals, each separated by thin white lines, and a cluster of slender stamen stalks topped with teardrop anthers at the center. The large petal areas are cut through while the stamen cluster creates a spray of small isolated islands at the heart of the flower. Carve the petals from the outermost tip of each down toward the flower center, then tackle the stamen teardrops last so the surrounding petal wall gives you a stable grip while working on those tiny pieces.
Swooping Bald Eagle Pumpkin Stencil
A bald eagle swoops down with wings fully spread in this striking pumpkin stencil, its feathers rendered as a fan of elongated oval cutouts radiating from the body while the torso, tail, and talons are larger open shapes. The mosaic of separate feather pierces makes the wings blaze with light and gives the design a dramatic stained-glass quality. Cut the smallest outer wing-tip feathers first while the wall is firmest, then work inward toward the body to avoid weakening the center before the delicate tips are done.
Headless Horseman Pumpkin Stencil
A headless horseman gallops across this pumpkin stencil: a rearing horse with flowing tail and mane, a cloaked rider holding a jack-o-lantern aloft in one outstretched hand, all cut as a silhouette composition with open negative space between the horse's legs and between the rider's cape and the horse's back. The carved jack-o-lantern in the rider's hand is its own small cutout with jagged eye and mouth slits. Carve the jack-o-lantern's tiny face cuts first, since that elevated detail is the easiest to lose if the surrounding wall shifts.
Sitting Cat Pumpkin Stencil
A young sitting cat looks upward with closed contented eyes, a round head, pointed ears with inner-ear detail, whisker lines, a small nose, and a curling tail visible at the lower right. The design uses a mix of large pierced areas for the background and solid islands for the face features, creating a charming cat pumpkin stencil. The whisker-line cuts are the thinnest elements; score them lightly first and remove the pumpkin skin in a single clean slice rather than sawing back and forth to keep them from cracking.
Let's Go Brandon Pumpkin Stencil
The phrase "LET'S GO BRANDON" is set in chunky all-caps stencil lettering across two lines, with each letter built from thick strokes and bridged counters so the whole design holds together as a single carved piece. The letters are fully pierced, glowing bright when lit. Because the letter A and the two O's have floating internal islands, cut those counter shapes first before clearing the surrounding letter bodies to keep the islands from shifting.
Make America Great Again Pumpkin Stencil
Four lines of bold stencil-style block text spell out MAKE AMERICA GREAT AGAIN across this jack-o-lantern stencil, with a five-pointed star flanking the top line and another pair of stars at the bottom. Every letter and star is carved as a separate pierced shape, so the orange pumpkin wall forms bridges inside closed letterforms like A, G, and R. Before cutting, secure those interior letter islands with a small pin through the pumpkin flesh so they don't drop out mid-carve and leave shapeless holes.
Crescent Moon Pumpkin Stencil
A crescent moon shape faces left, its body filled with a texture of small irregular cut-out marks that suggest the pitted surface of the moon, while a faint face profile is visible along the inner curve of the crescent. The large crescent itself is the main pierced shape, and the small interior texture dots pepper the body, creating a glowing stippled effect when lit from inside. To keep the many small interior marks from causing the crescent body to crumble, carve the outer crescent boundary first, then pick out the texture dots from largest to smallest using a small round drill bit or detail blade.
Jack-o-Lantern Face Pumpkin Stencil
A round jack-o-lantern face is carved within a jack-o-lantern, depicting a pumpkin-shaped head with a leering triangular eye, a jagged zig-zag mouth, and a bent stem on top, all surrounded by curling flame-like cuts along the exterior. The layered design creates an open-mouthed, angry pumpkin-face-within-a-pumpkin effect that reads as a bold silhouette when lit. Carve the curling outer flame cuts first, since they form the structural rim; leaving them for last risks cracking the thin outer edges after the interior is removed.
Devil Girl Pumpkin Stencil
A pin-up devil girl stencil shows a feminine face with two swept horns, one winking eye with full lashes, a smirking open mouth, crossed arms, and a small arrow-tipped tail curling up at the left side. The face features are rendered as solid islands floating within the larger pierced body and hair shapes. Carve the large hair and body outlines first to establish structure, then work inward to the eye and mouth detail; the tiny winking-eye slit is the most fragile cut and should be saved for last.
I Love West Virginia Pumpkin Stencil
This West Virginia pumpkin stencil arranges four chunky shapes in the classic "I heart state" grid: a tall rounded I, a wide heart, and the double abbreviation WV below, every piece carved fully through. The two matching V shapes in WV share a similar silhouette but sit side by side with a narrow gap between them; keep that gap cleanly cut so the two letters read as distinct when lit. A bright LED puck placed low inside the pumpkin casts the WV letters into sharp relief against the glowing heart above.
Knight on Horseback Pumpkin Stencil
A mounted knight in full armor charges across this hard pumpkin stencil: a plumed helmet, a raised sword pointing upward, a shield on the left arm, and a rearing horse with flowing mane and tail all read as a single bold silhouette. The composition is cut as one large negative space with only the sword blade, the shield, and the horse's legs as internal solid elements connected by thin skin bridges. Carve the outer silhouette edge first to release the large background, then carefully free the sword blade from top to tip while keeping the shield bridge intact.
Jesus Fish Pumpkin Stencil
This pumpkin stencil renders the Christian ichthys fish symbol horizontally across the pumpkin face: the fish body outline is formed by pierced dashes along the top and bottom edges, the word JESUS is cut in open block capitals inside the body, and a small cross sits at the tail junction on the right. The letters and outline dashes are all negative space, so the finished jack-o-lantern glows with JESUS framed inside the fish. Carve the outer dash segments first to establish the fish outline, then work each letter from E inward to avoid flexing the narrow skin strips between characters.
I Love Washington Pumpkin Stencil
Three distinct elements fill this Washington state pumpkin stencil: a tall rounded I in the upper left, a large heart at upper right, and the wide double-letter WA below, each shape pierced clean through. The W is notably broad with three deep V-valleys that require careful blade control at each inner point. Start with the heart to establish the visual center, then carve the W from its outer edges inward toward the valleys, scoring each V-tip lightly before cutting through to avoid tearing.
Jolly Roger Pumpkin Stencil
A classic Jolly Roger composition fills this hard pumpkin stencil: a large tricorn pirate hat at the top with an X emblem on its band, a grinning skull face below with oval eyes and a row of small separated teeth, and two crossed cutlass swords extending diagonally from behind the skull. The swords are cut as wide open shapes that frame the face, while the skull's eye sockets and the gaps between each tooth are the smallest, most fragile details. Carve the broad sword shapes first to release the large areas of pumpkin skin, then work inward to the fine tooth gaps using a narrow pointed blade.
Imp Face Pumpkin Stencil
A front-facing imp face fills this hard pumpkin stencil with layered detail: two curved horns at the top, heavy arched brow pieces over wide flame-shaped eyes, pointed ear flares on each side, a snarling open mouth with jagged teeth, and a chin medallion with a forked tip. The design reads as mostly open negative space on the pumpkin, with the narrow brow bridges and the gaps between each tooth being the most fragile elements. Carve the teeth last and use a very sharp detail blade to keep each pointed gap clean without breaking the thin skin separating them.
Octopus Face Pumpkin Stencil
A stylized cartoon octopus face fills this hard pumpkin stencil with a nearly circular head outline, two large round eyes with lash-like detail above them, a central beak-like nose bridge, and a decorative lower section featuring a symmetrical arch with layered cutwork and scalloped tentacle bases on each side. The round eyes are solid islands of pumpkin skin that must be preserved while the surrounding face is cut away. Carve the outer circular head arc first, then remove the face background working around the solid eye discs, and finish with the fine scalloped cuts at the bottom.
One-Eyed Furry Monster Pumpkin Stencil
A round, furry one-eyed monster stands full-body on this hard pumpkin stencil: a small round head with two stubby antennae sits atop a wide spherical body edged with shaggy fur, two four-fingered hands extend to either side, and two thick legs end in rounded shoes at the bottom. The mouth is a wide toothy grin with individual tooth gaps cut into the lower body. Carve the large body outline first since the shaggy fur spikes are easier to cut when the surrounding pumpkin skin is still firm; save the small tooth gaps inside the grin for last.
I Love Wyoming Pumpkin Stencil
Bold rounded letters spell out "I heart WY" across this Wyoming pumpkin stencil in four pierced shapes: a tall I, a large heart, a wide W, and a forked Y with a long descending stem. The Y's branching arms and narrow stem are the trickiest cuts; keep the blade moving steadily through the stem without pausing, which can cause a ragged edge. Lit from inside, the open heart reads first and the WY below grounds the composition with strong angular shapes.
Flaming Skull Pumpkin Stencil
A skull in three-quarter profile sits at the center of this hard pumpkin stencil, ringed by a crown of wild flame tongues that curl and taper at their tips. The skull's round cranium, hollow eye socket, nasal cavity, and separated teeth are all open cut-outs, while the solid skin between them forms the facial structure; the flames surrounding it are a mix of pierced channels and solid skin bridges. Carve the skull's eye socket and nose first, then work the teeth individually before tackling the outer flame tongues, which have thin tapered ends that tear if the blade stalls.
I Love Minnesota Pumpkin Stencil
Rated advanced, this Minnesota pumpkin stencil packs the "I [heart] MN" message into an oversized two-row grid. The large heart and the wide-stroked "MN" take up most of the composition, with the diagonal stroke of the "N" creating a narrow interior wedge that demands a steady hand. Cut the straight-sided "M" first, then tackle the "N" with careful plunge cuts at each corner of the diagonal to avoid tearing the thin pumpkin wall on either side of that wedge.
I Love New Hampshire Pumpkin Stencil
Rated advanced, this New Hampshire pumpkin stencil presents "I [heart] NH" in two rows with oversized block letters. The "N" and "H" are rendered in wide rounded caps: the "N" has a diagonal stroke creating a narrow wedge, while the "H" has a horizontal crossbar suspended between two uprights, leaving two open windows on either side. Tackle the "H" crossbar with plunge cuts at each end before sawing across to prevent the bridge from snapping under blade pressure.
One-Eyed Horned Monster Pumpkin Stencil
A squat, wide-bodied one-eyed monster fills this hard pumpkin stencil from head to toe: a large circular head that doubles as the body, a single giant eye at center made of three concentric rings with a crescent cut-out pupil, two small curved horns at the top, three-clawed hands on short arms at each side, and a wavy skirt-like bottom hem. The three concentric eye rings are connected by thin skin bridges and are the most fragile element; carve the outermost eye ring first and work inward, letting each ring dry slightly before cutting the next.
Cute Cartoon Monster Pumpkin Stencil
A round, cartoonish little monster stands front-facing with two large curved horns at the top, wide oval eyes, small fangs, fuzzy legs, and stubby arms raised at its sides. Most of the body outline is pierced through, leaving the solid oval pupils and the narrow bridges between the arms and torso intact. Carve the large horn arcs first while the pumpkin wall has maximum strength, then work inward to the eyes and finally the jagged fur fringe around the legs.
Flaming Skull Pumpkin Stencil
A compact cartoon skull wearing a crown of jagged flame spikes fills this pumpkin stencil, its round head showing two circular eye sockets, a small curved smile, and a row of three square teeth below, all surrounded by an aggressive ring of pointed flames and lightning-bolt tabs. The flames and most features are pierced-through openings, leaving solid bridges between the skull face and the outer flame ring. Cut the small oval and teardrop-shaped flame scatter pieces at the very top first, then work down through the zigzag flame ring before tackling the skull face openings, to keep the narrow bridges between flames intact as long as possible.
Cornucopia Pumpkin Stencil
A harvest cornucopia brimming with a small pumpkin, an apple, and assorted gourds fills this pumpkin stencil, with decorative swirling vines and leaf shapes radiating outward from the basket's opening. The woven horn body is built from curved concentric stripe cutouts, while the produce and vine scrolls are independent pierced-through elements against the solid surrounding wall. Cut the small vine scroll tips and round fruit openings before tackling the long curved stripe cuts in the horn body, as the stripe cuts pass close to each other and benefit from the surrounding wall being intact.
Happy Halloween Text Pumpkin Stencil
The words HAPPY HALLOWEEN appear in two stacked lines of wide block capital letters in this pumpkin stencil, the typeface clean and bold with squared serifs and open counters inside letters like A, P, O, and E. Every letter is a cut-through opening, so the lit jack-o-lantern displays a glowing two-line greeting. Before carving, identify the enclosed counter islands inside closed letters such as the inner triangles of A and the inner ovals of O and P, and cut those small interior pieces out first so each island stays anchored until its surrounding letter walls are removed.
German Shepherd Pumpkin Stencil
A German Shepherd in a proud alert stance fills this pumpkin stencil as a single clean silhouette: erect pointed ears, a strong muzzle, a deep chest, and a slightly tucked hindquarter all captured in an unbroken outline with no interior cut-outs. When carved, the whole dog shape is one large pierced-through opening that glows as a pure bright silhouette against the dark night. Because the design has no internal bridges to worry about, trace the outline slowly and keep the cut continuous, paying extra attention to the sharp ear tips and the fine fur texture along the belly line, which can tear if the blade catches.
Deer Skull and Rifles Pumpkin Stencil
Two crossed hunting rifles sit below a buck's-head silhouette with a full multi-point rack of antlers, forming a classic skull-and-crossbones arrangement in a hunting theme. All three elements are cut out as open silhouettes, so the rifles and antlers glow as bright orange shapes against the dark pumpkin. The junction where the rifle stocks cross is a narrow pinch point; trace that intersection carefully and cut each rifle as a separate pass rather than one continuous stroke to preserve the crossing bridge.
Skeleton with Wine Glass Pumpkin Stencil
A comical full-body skeleton stands upright in this pumpkin stencil, one hand raised with wispy steam rising from it and the other arm holding a wine glass, its cartoonishly large round skull grinning with exaggerated round eyes and a tiny circular nose. The torso shows a rib cage of horizontal bars, and the pelvis, legs, and clawed feet extend below in a loose stick-figure arrangement. Carve the wine-glass outline and the tiny nose circle first, as both are small isolated shapes that benefit from the surrounding wall being intact before you open the larger rib cage and body cavities.
One-Eyed Monster Pumpkin Stencil
This one-eyed monster character has a round head ringed with wild hair, a single large circular eye socket, a wide grinning mouth, and a short stubby body with splayed hands and feet. The stencil mixes solid areas (the pupil island inside the eye, the hair fringe, the torso patches) with pierced cutouts for the eye socket, mouth, and body gaps. Lit from inside, the monster's oversized eye glows brightly while the hair and body details form a dark, shaggy border. Keep the small circular island inside the eye intact, losing it turns the design from a recognizable eye into a plain hole.
Hibiscus Flower Pumpkin Stencil
A large hibiscus flower with five broad rounded petals and a starburst of slender stamens radiating from the center fills this pumpkin stencil, plus a small cluster of four round pollen dots floating in the upper right corner. The five petal sections and the space around the stamens are all pierced-through, leaving the thin stamen lines as solid bridges that cross the open flower interior. Cut the four small pollen dots first, then work petal by petal from the outside in, saving the narrow stamen bridges for last so they remain stable throughout the carving process.
Giraffe Pumpkin Stencil
A giraffe's elongated head and neck fill this pumpkin stencil from top to bottom, its distinctive coat pattern recreated as dozens of organic blob-shaped spots scattered across the neck and face. Each spot is a separate pierced-through opening, so when lit the jack-o-lantern glows with a constellation of irregular patches that read unmistakably as giraffe markings. Because many spots sit close together, cut the smallest spots near the top of the head first and work downward toward the larger neck patches, so the thin walls between neighboring openings stay supported longest.
Dancing Girl Pumpkin Stencil
A small cartoon girl with a ponytail stands with arms spread wide in this pumpkin stencil, her entire silhouette carved as a single large opening surrounded by six small four-petal flower cutouts scattered around her. The figure and each flower are separate pierced-through shapes, so the finished jack-o-lantern shows a glowing girl dancing among floating blooms. Cut the six small flower shapes first so the surrounding pumpkin wall absorbs tool pressure before you open the larger central figure.
I Love Maine Pumpkin Stencil
This Maine pumpkin stencil carves the bold "I [heart] ME" layout made famous by state-pride apparel: a tall serif "I" and a large smooth heart sit above the wide two-letter abbreviation "ME" in chunky rounded type. All four shapes are fully pierced through, so the jack-o-lantern glows with bright, clean cutouts against the orange wall. Because the heart is the largest single opening, carve it last to preserve structural support while you work through the tighter letter forms first.
Skull and Crossbones Pumpkin Stencil
A skull-and-crossbones design with a feminine twist fills this pumpkin stencil: a small round skull wears a decorative bow on top, its large eye sockets rendered as open flame shapes, while a pair of crossed bones extends to the left and right behind it. The cut-out eye flames and a tiny tooth row are pierced through against the solid skull mass, and four rounded bone ends glow as separate openings at the corners. Cut the small decorative bow petals at the crown before opening the larger eye shapes, so the thin pumpkin wall connecting the bow to the skull doesn't flex and tear.
Cowboy Skull Pumpkin Stencil
A grinning cowboy-hat skull faces three-quarters toward the viewer, its wide-brimmed hat battered and torn along the crown. Hollow eye sockets and an open jaw with individually delineated upper and lower teeth are pierced through, while the hat brim, cheekbones, and nose cavity form a complex arrangement of solid bridges. Flame wisps curl at the chin. When lit, the teeth row and eye sockets glow against the dark skull mass, creating a hard-boiled undead outlaw look. Cut each tooth gap individually rather than sweeping through the whole row to keep the ridges crisp.
Evil Rabbit Skull Pumpkin Stencil
A sinister rabbit skull stares from this hard-level pumpkin stencil: the elongated ears flow upward into wild flame-like wisps, and the face is a mask of interlocking oval and rectangular cutouts forming the eye sockets, snout bridge, and a row of small rounded teeth at the bottom. The entire composition is tightly packed with narrow white-line channels separating each island, so the lit jack-o-lantern glows with an intricate dark-rabbit visage. Begin by cutting the row of small round teeth at the base before moving up to the larger eye and snout openings, as the teeth are the most isolated and easiest to free without disturbing surrounding bridges.
Anatomical Heart Pumpkin Stencil
An anatomical human heart rendered in stylized line art fills this pumpkin stencil, showing the four-chambered organ with aorta and pulmonary artery branching upward and a branching network of vessels spreading across the lower half. The design is built of thick curved channels that are cut through, leaving a web of solid pumpkin bridges between them that hold the composition together. Carve the thinnest branching vessel channels at the base first so you can still brace the pumpkin firmly against those areas before the larger upper artery cuts remove structural mass from the top of the design.
RIP Tombstone Pumpkin Stencil
A classic Halloween tombstone with a pointed arch and pedestal base fills this pumpkin stencil, its face engraved with a melting ghost figure and the letters R.I.P. The ghost's hollow round eyes and the R.I.P. text are pierced-through openings against the solid tombstone body, which itself is surrounded by a large cut-out arch that glows around the stone's perimeter when lit. Cut the small letter periods and the ghost's eye dots before opening the large arch surround, so the isolated letter islands stay stable while the surrounding wall is still full.
Cracked Skull Pumpkin Stencil
A side-facing human skull, cracked and fragmented, makes up this dramatic pumpkin stencil. Jagged fracture lines split the cranium into separate floating pieces, a single large orbital socket sits center-left, a smaller eye socket appears at the right, and the jaw opens to reveal ragged broken teeth. The intact pumpkin skin forms the skull fragments themselves while the large skull cavity, orbital holes, and tooth gaps are cut away. Carve the thin fracture-line gaps between skull fragments carefully and early, then work outward to the large open skull interior.
Evil Clown Pumpkin Stencil
Jagged wing-like eyes arch above a massive serrated grin packed with long, irregular fangs on this evil clown jack-o-lantern pumpkin stencil. Both eye pieces and the mouth arc are fully cut through, leaving a small heart-shaped nose sliver as the only solid detail inside the grin. The thin points of each fang are the most fragile elements: carve the broad base of the mouth opening first, then carefully nibble out each fang tip from base to point to avoid snapping them off.
Haunted Church Pumpkin Stencil
A tall, narrow gothic church building with a cross at its steeple peak forms this haunted-house pumpkin stencil. Flanking the spire are two dead trees rendered as diagonal stick shapes with crosshatch window-pane details, and a row of grass tufts sits at the base. The arched doorway and tall multi-pane windows are the primary cut-through openings, while the church walls, trees, and ground remain solid. Cut the small rectangular window panes in the trees first, then the main church windows, so the thin tree branches stay anchored while you work.
Football Helmet Pumpkin Stencil
A football helmet in profile occupies this sports pumpkin stencil, showing the rounded shell, a single face mask with crossbar guards, a chinstrap ball, and a curved bill visor. The large dome of the helmet is a solid pumpkin-skin mass; the face mask bars, voids between them, and the outer rim are all cut through. Carve the small rectangular gaps inside the face mask cage first, while the wall is fully rigid, then cut the large surrounding negative space around the helmet outline.
Cartoon Vampire Pumpkin Stencil
A cartoonish chibi-style vampire stands front-facing on this pumpkin stencil, wearing a sweeping cape, a bow tie, and an impish grin showing two prominent fangs. The face details, hands, cape folds, and bow tie are all separate cut-out islands surrounded by solid pumpkin bridges. Start with the smallest interior islands such as the round cheek circles and the bow tie before cutting the large cape sections, so those tiny pieces are supported by a still-intact wall when you trace them.
Rocket Ship Pumpkin Stencil
A retro rocket ship blasts off inside a circular porthole frame in this space pumpkin stencil. The rocket has a pointed nose cone, a round porthole window on its body, swept-back tail fins, and a fan of exhaust flames spreading beneath it, all set within a large open circular border. The rocket body and circle frame remain as solid pumpkin skin while the background inside the circle, the fin gaps, and the flame tongues are cut through. Cut the narrow gaps between the individual flame tongues first so the lower rocket structure stays intact before the large circular background is removed.
Florida Pumpkin Stencil
The outline of the state of Florida is cut as a single solid silhouette on this states pumpkin stencil: the long panhandle extends left, and the distinctive peninsula curves south and ends in a ragged coastline. The entire shape is one continuous void with no internal bridges, making it a fully open lantern window. The tricky part is the complex Atlantic coastline on the right side, where small inlets create many convex curves in quick succession: slow down on those curves and let the blade pivot rather than forcing a turn.
Fox Pumpkin Stencil
A fox in a frontal stance with pointed ears, a small round nose, almond eyes, and a bushy chest rendered in flowing tribal-style strokes fills this hard animal pumpkin stencil. The fur is suggested by numerous narrow curved blade-shaped cutouts that radiate from the body center, each separated by thin pumpkin-skin bridges. Because many of these fur-stroke islands are only a few millimeters wide, carve the face feature voids first to anchor the design, then work outward through the fur strokes from chest to leg tips.
Frankenstein Pumpkin Stencil
This Frankenstein pumpkin stencil takes a bold, graphic approach: a wide flat-topped head with jagged spiked hair cut as a top border, a dense row of small stitch cuts across the forehead, thick angular brow and wide nose, a broad mouth showing individual teeth, and square neck-bolt tabs on both sides. The cut shapes are chunky and widely spaced, letting abundant light pour through the tooth row and eye slots when carved. Cut the tight stitch row across the forehead first, keeping each tiny rectangle separate, before opening the larger eye and mouth areas.
Toad Pumpkin Stencil
A plump toad viewed in profile crouches on this hard Halloween pumpkin stencil, with a large circular eye, a wide body, and four splayed feet rendered as interlocking cut-out sections separated by curving skin bridges. The body reads as a mosaic of light and shadow when lit, with the large back void glowing brightly and the leg bridges casting graphic lines across the opening. Cut the round eye circle first, then work from the head backward through each body section toward the feet.
Happy Birthday Pumpkin Stencil
Bold block-letter text reading HAPPY BIRTHDAY fills this pumpkin stencil in two stacked rows of chunky stencil font, with each letter interior cut away and the letter strokes left as solid pumpkin skin. The design spans nearly the full face of the jack-o-lantern, making it a wide, flat carve with very little negative space. Because the closed counters inside letters like B, D, and P are floating islands of skin, carve the letter surrounds first, then carefully cut the inner counter openings to avoid dislodging them prematurely.
Tombstone with Ghost Pumpkin Stencil
A weathered tombstone with a cross relief, set inside a crumbling rectangular frame with broken corners, forms the centerpiece of this pumpkin stencil. A wispy ghost flame rises from the lower left and a skeletal hand or root tendril emerges from the lower right. The cross and tombstone body stay solid while the frame edges, ghost flame curls, and surrounding areas are cut through. Cut the looping ghost-flame curls on the lower left before removing the wide rectangular frame opening, so those thin curving lines have maximum wall support.
Friendly Ghost Pumpkin Stencil
A cheerful, cartoonish ghost with a round pudgy body, wide grinning face with crinkled eyes and rosy cheeks, and wavy trailing edges floats center-stage in this ghost pumpkin stencil. The ghost's body is a network of flowing curved solid lines, the outline, the cheek arcs, the eye detail curls, set against cut-through areas that form the glow around the figure. Wispy curl accents appear on both sides. The crinkle details inside the eyes and the small cheek curves are the narrowest solid bridges; cut those first before removing any of the surrounding open areas.
Butterfly Pumpkin Stencil
A large open-winged butterfly with patterned inner wings and gracefully pointed outer wing tips fills this hard animal pumpkin stencil. The wings feature multiple elongated oval cutouts radiating from the central body like veins, with each oval surrounded by a narrow pumpkin-skin bridge. Cut the smallest interior oval slots in the lower hind wings first before opening the larger upper-wing ovals, so the fine bridges between them are still backed by solid wall when the blade goes in.
Golf Cart Pumpkin Stencil
A golf cart seen from the side dominates this sports pumpkin stencil, showing a round-headed driver at the wheel, a bag of clubs clipped to the back, a flat roof canopy overhead, and two large circular wheels below. The cart body is a single large pierced-through shape, while the roof bar, wheel wells, and club bag read as distinct solid bridges that light outlines when the jack-o-lantern is lit. Start by cutting the two big wheel openings at the bottom so the lower wall is relieved before you work upward toward the narrower details around the driver's head.
Gone Fishin Pumpkin Stencil
A fisherman standing in the bow of a flat-bottomed bass boat casts a long fishing rod overhead, with water ripples beneath the hull and the words GONE FISHIN' in stencil-style block letters below the scene on this pumpkin stencil. The silhouetted angler and boat hull are cut away entirely, while the thin rod line and letter counters remain as skin bridges. Carve the compact fisherman-and-boat silhouette first, then tackle the letter row below, saving the closed-counter letters for last.
Furry Monster Pumpkin Stencil
A stocky, fuzzy monster with two curved C-shaped eyes, a wide toothed grin, shaggy fur texture all over its body, two stubby horns, and three-fingered clawed hands raised at its sides fills this hard pumpkin stencil. The fur shag is expressed as jagged fringe cuts around the silhouette's edge rather than interior cuts, keeping the figure stable. The thick C-eye shapes and the tooth row between the upper and lower jaw are the most structurally important bridges. Carve the fur fringe around the outer edge before opening the smile area so the lower body stays anchored.
Googly-Eyed Ghost Pumpkin Stencil
A cartoonish goggle-eyed creature with a wide open mouth and trailing ghost-like body fills this pumpkin stencil: two circular eyes each orbit a crescent-shaped eyelid, and a broad flowing torso dissolves into wispy tendrils at the base. The large open area of the body is pierced through entirely, while the eye elements and a small beak-like mouth cutout remain as floating islands bridged by thin pumpkin walls. Cut the smallest interior eye details before the large body opening so the bridges stay supported and the delicate crescent lids don't snap under tool pressure.
Frankenstein Face Pumpkin Stencil
A detailed Frankenstein portrait fills this jack-o-lantern pumpkin stencil: the creature's flat-topped head, spiky hair, bolt-and-stitch scar running diagonally across his forehead, heavy brow ridge, round glasses, and grimacing stitched mouth are all rendered as bold cut-through shapes. The thick outlines stay solid while the eyes, glasses lenses, and scar details pierce through, casting dramatic light patterns. Cut the small stitch details on the forehead first so the surrounding pumpkin wall stays firm while you work inward toward the larger facial openings.
Olympic Rings Pumpkin Stencil
Five interlocking rings arranged in the classic Olympic formation fill this sports pumpkin stencil from edge to edge. Each ring is a thick circular band with its interior cut through, and the four points where adjacent rings overlap create small lens-shaped intersections that remain as solid bridges. The design is bold and widely spaced, with most of the glow coming from the large interiors of each ring. Cut the small lens-shaped overlap bridges last, never remove them, and carve each ring interior starting from the top-left ring and working right, so the connected structure stays rigid throughout.
Political Caricature Pumpkin Stencil
A caricature portrait of a suited male figure dominates this pumpkin stencil: the subject has distinctive swept-back hair, heavy open-mouthed expression, a pointing raised finger on one hand and a fist on the other, rendered in sweeping negative-space cuts against a solid silhouette. The broad facial features, jacket lapels, and hand details are all cut through, reading as bright shapes when the jack-o-lantern is lit. Cut the fine hair and facial detail lines first while the overall shape is still rigid, then remove the larger background areas last.
Mushroom Face Pumpkin Stencil
A large mushroom cap viewed head-on occupies the center of this pumpkin stencil, with the rounded cap outlined by a wide curved arc at the top, a pair of angled brow-like ridges beneath giving it a brooding expression, two crescent-shaped gill slits, and a column of vertical stem lines below that narrow at the base into root tendrils. Several short wispy cuts at the upper right suggest spores or texture. The negative spaces between these cut shapes read as a haunting mushroom face when lit. Cut the thin gill crescents before the wider stem column to keep the central face stable.
Cartoon Frankenstein Pumpkin Stencil
A cartoon-style Frankenstein face makes up this pumpkin stencil, built from simple geometric pieces: a wide zigzag hairline across the top, two rectangular eye blocks each containing a cut-out square, circular ear studs on both sides, a broad grinning mouth open at the bottom, and two separate curved stitch marks, one on the forehead, one near the chin. The shapes are chunky and well-separated, so the candle light reads cleanly through each element. Carve the two small curved stitch shapes before the large mouth opening so the lower face stays anchored while you work.
Three Bats Pumpkin Stencil
Three snarling bats in different sizes swoop across this bats pumpkin stencil: one large bat dominates the lower center with wide jagged wings and a gnashing face, a medium bat flies mid-right, and a small bat trails upper-left, all fully pierced through. The graduated scale creates depth on the jack-o-lantern face, and because the large bat's wing tips are long and thin, cut those points last after the broad wing voids are already removed to avoid snapping them during the heavy cutting.
Evil Scarecrow Pumpkin Stencil
An oversized evil face fills this scarecrow pumpkin stencil, with heavily arched crescent brows slanting inward over deep-set crescent eyes, a small heart-shaped nose cutout, and a wide grinning mouth lined with dozens of sharp, evenly spaced spike teeth. All facial features are pierced through; the pumpkin skin between them forms the cheeks, brow ridge, and lip edges. Begin with the eyebrow slashes, then the eyes, saving the spike-tooth mouth for last because those narrow points snap easily if the wall has already been weakened.
Baby Dragon Pumpkin Stencil
A round cartoon dragon chick with large round eyes, stubby clawed feet, and a toothy grin fills this hard dragon pumpkin stencil, its body encircled by a looping scaly tail. The large circular body void and the face features are pierced through, while the narrow tail arc and the skin between the eyes form the connecting bridges. Cut the small interior eye and teeth details before opening up the large body circle, so those tiny islands are still supported by the surrounding wall.
One-Eyed Monster Pumpkin Stencil
A quirky one-eyed worm-like creature stands upright in this animals pumpkin stencil: a large circular head with a concentric inner eye ring and a crescent pupil, small antenna nubs around the head rim, a fanged grinning mouth, two tiny three-fingered arms raised at its sides, a long segmented body with ringed markings, and curling feet at the base. The thin connecting lines between head, body, and limb segments are the most fragile parts of this carving. Cut the small finger and toe tips before the body-segment cuts so the creature's extremities have maximum wall support.
Cartoon Dragon Pumpkin Stencil
A cartoon-style dragon stands upright with a crested head, open toothy grin, round eye, segmented belly, and a curling tail, all rendered in a chunky outline style on this pumpkin stencil. The body outline, crest spines, and scattered limb shapes are pierced through, while narrow bridges at the belly segments and tail curl remain solid to hold the design together. Cut the largest body cavity first, then the outer wing and limb fragments; save the tiny belly-rib slits for last so the structure stays rigid while you finish the surrounding cuts.
Zombie Arm Pumpkin Stencil
A single decayed zombie arm reaches upward from the ground in this pumpkin stencil, the skeletal hand and bony fingers clawing into empty space while the forearm and sleeve taper to a ragged ground line at the base. The design is mostly one large connected negative-space cut with thin solid bridges defining the sleeve folds and individual finger bones. Cut the individual finger separations before releasing the large arm opening so the fingertips stay supported until the end.
Bride of Frankenstein Pumpkin Stencil
This pumpkin stencil depicts the Bride of Frankenstein: a woman's face in three-quarter profile with her dramatically tall, wild hair rendered as a jagged silhouette swept around the head. The face remains solid orange pumpkin skin, with the surrounding hair and shadow cut away to reveal the profile through negative space. Because the wispy tendrils of hair are narrow and fragile, use a thin detail blade and cut those curling strands before tackling the large surrounding void so the stencil sheet still holds them in place.
Grim Reaper Pumpkin Stencil
A compact cartoon Grim Reaper stands front-facing with a skull face peering out from a rounded hood, angular raised arms gripping a long diagonal scythe pole, a blocky robe body with visible feet, and a small wisp of ground fog at the base on this hard pumpkin stencil. The scythe blade is a large separate curved cutout at the upper right, while the skull face features two angular eye holes and a small nose cutout. Cut the scythe blade first since it is isolated and large, then the hood opening, skull details, and robe voids in that order.
Wild Monster Pumpkin Stencil
A wild-haired cartoon monster character grins with an enormous open mouth in this pumpkin stencil, its jagged mane and raised arms forming the outer silhouette, while the gaping mouth interior and a large swirling single eye are the primary cut-through elements. Small outstretched finger gaps and a body hollow add secondary glow points. Cut the wide gaping mouth cavity first since it is the largest opening and removing it early prevents the pumpkin wall from bowing when you make the tighter surrounding cuts.
Sauropod Dinosaur Pumpkin Stencil
A chubby cartoon sauropod dinosaur faces left in this pumpkin stencil, its long curved neck arching upward to a round head with a tiny roaring mouth, while the body is covered in a cluster of pierced circular spots of varying sizes. Stubby legs and a long sweeping tail complete the outline silhouette. Cut the circular body spots from largest to smallest so the surrounding orange wall stays strongest while you work toward the smaller, more fragile dot cuts.
Sugar Skull Pumpkin Stencil
A sugar skull face radiates symmetry in this Dia de los Muertos pumpkin stencil, with two large oval eye openings, a heart-shaped nose, and a row of rectangular teeth cut through, flanked on each side by detailed rose clusters with petal loops. The forehead band is a broad solid bridge separating the floral crown region from the face below. Cut the intricate rose petal loops before the large eye ovals, since the petals are fragile and need the surrounding wall still intact for support.
Haunted Tree Pumpkin Stencil
A gnarled, wind-blown tree trunk splits into wildly curling branches with spiral tips in this hard-rated pumpkin stencil, the entire tree canopy forming a large negative-space cut-out against a small RIP gravestone and a spider-web accent that remain solid. The swirling branch tips are the most delicate cuts in this design; save them for last and use a thin-tipped blade, approaching each spiral from the outside inward so you never cut across a completed curl.
Sea Monster Pumpkin Stencil
A stylized deep-sea creature face stares from this pumpkin stencil, its triangular hooded head framing two bulbous, tentacle-ringed eyes and a beaked mouth below, with two sets of curved claw-like appendages at the bottom. The large triangular head opening is the primary cut-out that floods the design with candlelight, while the eyes with their frilled tentacle edges remain as detailed solid islands within it. Carve the eye tentacle frills with a fine blade before opening the surrounding triangle, so those delicate projections have wall support behind them.
Rat and Moon Pumpkin Stencil
A large aggressive rat crouches in front of a semicircular moon arch in this pumpkin stencil, its shaggy fur rendered in dozens of fine radiating cut lines while the long serrated tail curves up behind it. Small star-burst marks scatter near the snout. The moon background is the main large negative-space cut-out, while the rat body itself is an intricate network of fur-line slots with solid orange between them. Cut the moon arch first as a single clean sweep, then work the fur lines from the rat's back inward toward the belly.
Elk Head Pumpkin Stencil
A majestic elk head in silhouette, with a full rack of branching antlers spreading wide above a solid face, ears, and ruffled neck fur, forms this hard-difficulty pumpkin stencil. The entire silhouette is one connected cut-away area, making the antler tines the most delicate element: each branch tapers to a fine point at its tip. Cut the main skull and neck outline first to establish the shape, then work from the antler base toward each tine tip to avoid vibrating the narrowest points before the rest is secure.
Bigfoot Pumpkin Stencil
A full-body Bigfoot figure strides confidently to the right on this hard-difficulty pumpkin stencil, rendered in a chunky outline style with shaggy fur edges, a broad face with heavy brow ridges and small eyes, swinging arms, and large flat feet. The body outline and fur texture gaps are all pierced, while a central vertical strip of skin connects the figure's torso to the pumpkin background on each side. Preserve the narrow fur-edge bridges along the arms by cutting inward from the outer contour rather than slicing along the bridge line itself.
Will You Marry Me Pumpkin Stencil
The words "WILL YOU MARRY ME" are stacked in four lines of large bold block letters that fill the entire pumpkin face on this hard pumpkin stencil. Each letter is a solid-bordered cutout with counter shapes, and letters with enclosed loops such as the O and D require internal bridges to retain the center islands. Cut the counters inside closed letters first before removing the outer letter bodies, so the island pieces stay seated in place and do not drop into the pumpkin during carving.
Unicorn Head Pumpkin Stencil
A unicorn head in three-quarter profile faces left with eyes gently closed and long lashes visible, a segmented spiraling horn at the brow, small round nostrils, and a flowing mane of long layered strands cascading to the right on this hard pumpkin stencil. The mane strands are narrow parallel ribbons of solid skin separated by pierced channels. Cut the large open head silhouette first, then carve each mane ribbon from its base at the neck upward so the tapered strand tips are the very last cuts and never lose support.
Darwin Fish Pumpkin Stencil
The iconic Darwin fish emblem fills this pumpkin stencil as a horizontal fish silhouette with small walking legs at the bottom, the word DARWIN lettered inside the body using bold block capitals separated by vertical post bridges. Both the fish background and the letter interiors are cut through, so the orange bridges spelling out DARWIN glow as solid bars when lit. Carve the background fish outline opening first, then cut each letter interior separately to keep the thin vertical bridges from flexing and cracking.
Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton pumpkin stencil shows the dinosaur in profile walking left, with a series of large angular back plates rising above the spine, a segmented backbone, oval body spots, four chunky limbs, a branched tail end, and a small open mouth with teeth. The back plates cut through as individual diamond and triangular shapes while the body spots and limb outlines are separate pierced sections, leaving orange ribs of skin between them. Cut the back plates from the tallest center spike outward toward the smaller side plates so the tallest unsupported pieces are freed last.
COEXIST Pumpkin Stencil
The word COEXIST is spelled out in large block letters where each letter is formed by a different world symbol: a crescent and star, a peace sign, an equals sign, a Star of David, the Eye of Providence, a yin-yang circle, and a Christian cross. All seven symbols are cut through the pumpkin wall so candlelight illuminates each one independently. Because the circular peace sign and yin-yang contain floating interior pieces, press a toothpick through the interior disk of each from the inside after cutting to hold it in place.
Zombie Jack-o-Lantern Pumpkin Stencil
A zombie jack-o-lantern face built from two large ringed eyes with small round pupils, curved eyebrows, tiny paired nose holes, and a wide rectangular mouth filled with jagged uneven teeth above and below. The bulging eyes retain orange rings between the outer circle and pupil circle, creating a wild, spinning stare when lit. The two circular eye rings are floating islands that must be secured; after cutting each outer eye circle, press the ring from the inside so it sits flush before removing the surrounding pumpkin section.
Cool Dude Sunglasses Pumpkin Stencil
A cartoon face with swept-back windswept hair, heavy brow, and large wraparound sunglasses fills this hard halloween pumpkin stencil, the lenses, hair wisps, and facial contours all rendered as separate cut sections connected by thin skin bridges. Lit from inside, the open sunglasses lenses glow brightly while the raised brow and cheek lines stay solid, giving the face a streetwise, sunlit look in reverse. The thin strands of hair near the temple are the most fragile bridges, so cut them after all the larger facial sections are removed.
Evil Clown Pumpkin Stencil
A sinister clown face with tall horn-like hair spikes, hollow cheekbone arches, a wide gaping smile showing separated teeth, and small spiral eye-corner details makes this hard evil clown pumpkin stencil immediately recognizable. The design is carved almost entirely as negative space, with the face, mouth, and eye areas all open and the narrow skin ridges of the hair spikes and cheek arches defining the character. The two tall hair spikes at the top are the thinnest connected elements, so cut them after all the large face openings are out to keep them from vibrating loose during the heavier cuts.
Fuzzy Monster Pumpkin Stencil
A round, fuzzy cartoon monster with stubby arms and legs dominates this hard pumpkin stencil, set inside a large circular frame with small scattered cut-outs suggesting a speckled texture. The creature has crescent-shaped eyes, a wide open mouth rimmed with ragged teeth, and a tongue poking out, while splatter-like shapes burst from the sides. The monster's body is largely solid orange with the negative space around it carved out, so light escapes the outer circle and the scattered texture dots, keeping the face readable. Cut the circular outer border and the scatter dots before tackling the detailed mouth.
One-Eyed Monster Pumpkin Stencil
A round one-eyed cartoon monster fills this funny pumpkin stencil, its single large circular eye containing a crescent pupil, a wide toothy grin below, and four spindly stick arms raised overhead, each ending in a three-fingered hand. The monster's body ring and arms are left as pumpkin skin, while the eye surround, mouth opening, and spaces between the fingers are cut through, glowing when lit. Carve the tiny gaps between the finger stubs before tackling the eye ring, since those narrow channels are easiest to control before the surrounding wall is weakened.
Scary Clown Pumpkin Stencil
A snarling clown jack-o-lantern face fills this hard-level pumpkin stencil, with wild flame-like tufts of hair radiating from both sides, a menacing brow ridge, swirling round eyes with small pupils, and a wide mouth packed with jagged triangular teeth. The dense ring of hair pieces are cut through while the circular eye centers and curved nose remain as solid orange bridges. Cut the central face shapes first, then work outward to the individual hair flames so each spike stays supported until the very end.
French Bulldog Pumpkin Stencil
A French Bulldog face stares straight out in this hard dog pumpkin stencil, its large upright bat ears, flat wrinkled muzzle, deep-set eye hollows, pushed-in nose, and jowl folds all captured as a continuous linework design with the open channels carved through and the skin ridges left intact. The ears are wide and open, connecting to the head via two curving lines that form thin bridges at the ear base. Carve the interior face details, including the eye hollows, nose curl, and jowl lines, before cutting the outer ear outlines, so the head stays rigidly attached while you work the delicate inner linework.
Honeybee Pumpkin Stencil
A honeybee shown from above spreads four large wing panels around a segmented body in this bee pumpkin stencil, each wing outlined by a curved channel and left as a solid pumpkin-skin shape, while the spaces inside and between the wings are cut open. The head, thorax, and three abdominal segments are kept solid with open gaps between them, and two curling antennae rise from the head. Cut the antenna curls first since they are the narrowest, most isolated elements, and finishing them before weakening the surrounding wall prevents breakage.
Snarling Rat Pumpkin Stencil
A snarling rat pumpkin stencil rendered in detailed linework shows the animal rearing up on its hind legs, front paws raised, with a long curving tail sweeping to the left, ragged fur along the spine, clawed feet, and an open mouth with visible teeth. Dozens of short cut lines define the fur texture and claws, leaving narrow orange ridges between them, so the finished jack-o-lantern reads as a detailed fur-covered creature rather than a flat silhouette. Work in sections from the tail outward, cutting fur-texture lines in short strokes rather than single long passes to avoid splitting the thin ridges.
Cartoon Spider Pumpkin Stencil
A cartoonish spider hanging from a single thread pumpkin stencil, with a wide spiky thorax section, four curved legs extending from each side, and a round head featuring a ring of small eyes above a smiling mouth with fangs. The open areas between the legs cut through to the light, while the solid spider body and thick leg stripes remain as orange pumpkin skin. The thin thread line at the top is the most vulnerable detail; pierce it last and use a linoleum cutter rather than a saw so it does not snap under lateral pressure.
Cartoon Mummy Pumpkin Stencil
A squat cartoon mummy stands front-facing in this pumpkin stencil, its head wrapped in bandage strips that curl into decorative scrolls above, while a broad grinning skull mouth with large square teeth is cut through below. The wrapped body, arms, and stubby legs are defined by horizontal bandage-strip negative spaces that blaze with light when carved. Cut the curved scroll shapes at the top of the head before tackling the body strips, as the scrolls are the most delicate elements here.
Cartoon Cow Pumpkin Stencil
A chubby cartoon cow pumpkin stencil shows the animal facing forward with large round nostrils, oval spot patches scattered across its body, small pointed ears, a tufted tail to one side, and four chunky hooves below. The design uses a mix of cut-through spots and solid orange body mass so the cow's form remains readable while light glows through each spot. Cut the large open belly area first to establish the cow's body outline, then tackle the individual spots; the small ear tips are the most fragile pieces and should be cut last.
Carnivorous Plant Pumpkin Stencil
A carnivorous plant in a small pot rears up with a wide-open dinosaur-like skull head in this hard halloween pumpkin stencil, its spotted cap, rows of sharp exposed teeth, a single round eye socket, small side leaves, and a slender stem all rendered as an intricate mix of open cuts and skin bridges. The row of individual teeth is the most demanding detail, each one a narrow spike that must stay connected at its root while the surrounding jaw is removed. Cut the eye socket and cap spots first, then work the tooth row from the back molars forward to the front fangs, leaving each tooth tip touching its neighbor until the very end.
Chamomile Flower Pumpkin Stencil
A daisy-like chamomile flower with a round center disc, about fourteen smooth rounded petals radiating outward, a curving stem, and two smooth teardrop-shaped leaves forms this flower pumpkin stencil, with each petal and the leaves cut as individual open shapes separated by thin skin ridges. When lit, the individual petals glow like a ring of light around the solid center button, and the stem and leaves add a botanical silhouette below. Cut the two leaf shapes at the base first so the stem is fully supported, then work petal by petal around the flower head from bottom to top to avoid rotating the pumpkin repeatedly over a weakened stem area.
Trick or Treat Pumpkin Stencil
A bold typographic pumpkin stencil spelling out TRICK OR TREAT in three stacked lines of wide block stencil letters, each character separated by narrow bridges that keep the letterforms readable when carved through. The large open interiors of the letters glow with even, full-face brightness when lit. Cut enclosed letter counters, the circular center of the R and the inside of the O, before removing the surrounding letter bodies, so those islands stay in position while you work.
Kawaii Acorn Pumpkin Stencil
A kawaii-style acorn character fills the stencil: the domed cap is covered in a dense diamond lattice of cut-out shapes, while the rounded body below carries two crescent-shaped eyes, a small curved smile, and delicate arm curves along each side. Lit from within, the hatched cap glows like a lantern screen and the face reads warmly against the solid body. Carve the lattice diamonds from the center of the cap outward, and avoid cutting the thin grid lines between them until all surrounding diamonds are removed.
Bloodshot Eyes Emoji Pumpkin Stencil
A double-eyeball emoji pumpkin stencil showing two large oval eye shapes side by side, each filled with a crescent-shaped pupil and surrounded by radiating cracked vein lines that branch outward from the iris to the oval edges. When lit, the big ovals glow brightly while the solid crescent pupils and vein bridges stay dark, creating an unsettling bloodshot stare. Cut the largest oval backgrounds of each eye before the thin branching veins, since removing the big sections first gives your blade room to maneuver around the fragile vein tips.
Scarecrow Pumpkin Stencil
A friendly scarecrow stands arms-out in classic T-pose: a brimmed hat with a small torn-corner flap, a round face with X eyes and a stitched-line smile, a necktie, straw tufts poking from the sleeves and hem, and a central post below the body. The design uses a mix of open cuts for the background spaces and solid orange bridges that form the straw strands, clothing triangles, and facial features. When lit, the scarecrow appears as a warm silhouette with the straw tufts back-lit individually. Cut the small X-eye shapes and the stitched smile first, as these tiny marks are hardest to control once surrounding material is removed.
Sports Balls Pumpkin Stencil
Four sports balls are stacked and overlapping in a loose cluster: a soccer ball at the top with its pentagon-patch pattern, a football on the left with stitching lines, a basketball on the right with its curved seam lines, and a baseball at the front center with a double-stitch seam. Each ball's distinctive surface markings are left as uncut pumpkin ridges, so when lit the glowing interior shines through the open areas between stitches and panel gaps. Carve the baseball's curved stitch lines last since they are the finest linework and benefit from the stability of the surrounding cuts already in place.
Cat Skeleton Pumpkin Stencil
A cat skeleton pumpkin stencil showing a prowling feline in full lateral profile with anatomically spaced bones: open-jawed skull, arching vertebral spine, curved ribcage with individual parallel ribs, limb bones with distinct joints, and a short stubby tail. The entire skeleton is carved through as cut-outs that glow against the solid pumpkin background. The individual rib tips are the most fragile elements, so carve them last and use a fresh blade to avoid cracking the thin bone strips.
Chibi Mummy Pumpkin Stencil
A chibi-style mummy pumpkin stencil showing a squat, round-headed figure wrapped head-to-toe in curved bandage strips, with two large oval eyes cut through the face and a small triangular nose below. The character stands in a wide-legged stance with stubby arms held out to the sides. Lit from inside, the big eye circles and the gaps between bandage strips all glow independently, so start by cutting the largest background sections on the torso before moving to the small curved wrapping strips, keeping at least two bandage bridges intact on each limb to prevent them from falling free.
Alien Face Pumpkin Stencil
An alien face with a massive domed cranium, huge almond-shaped eyes with small round irises, a vestigial nose, and thin lips fills the stencil from chin to crown, flanked by flame-like protrusions from the skull. The large dome is carved open, while the eyes are cut as open ovals with small solid iris nubs, and a series of small petal shapes around the chin and cheeks add texture. Lit from inside, the open skull dome blazes brightest and the eye shapes glow along the lower half, giving the face an eerie two-zone lighting effect. To keep the narrow iris nubs centered inside the eye ovals, cut the outer eye shape before removing the interior.
Baseball Pumpkin Stencil
A full-face baseball pumpkin stencil showing the ball's circular outline split into four arc segments, with two curved seam lines running down the center packed with small chevron stitching details. The large pierced sections glow brilliantly when lit, while the narrow seam bridges stay solid to keep the stitching legible. Carve the four outer arc segments first to stabilize the pumpkin wall before tackling the delicate stitching chevrons at the center.
Chibi Frankenstein Pumpkin Stencil
A cartoon Frankenstein pumpkin stencil showing a chibi-proportioned monster with a large flat-topped head, visible neck bolts, heavy brow, open rectangular mouth, and a stumpy body wearing a belted jacket and big platform boots, caught mid-lurch. The face detail, almond eyes, scarred brow, and protruding lower lip, all read as cut-out shapes against the solid head. Carve the face detail cuts before removing the large body sections, so the head stays rigid on the wall while you work the fine facial features.
Witch Silhouette Moon Pumpkin Stencil
A silhouette witch pumpkin stencil showing a tall, elegant witch figure standing inside a large oval moon shape, holding her broomstick upright at her side with its bristle end resting on the ground and a small curled wisp near her feet. The witch silhouette stays solid orange while the surrounding oval moon area is carved away, creating a glowing halo effect that frames the dark figure. Carve the large oval background sections on either side of the witch's body in two passes, leaving the thin bridges at her hat brim and broomstick handle intact to keep the figure anchored.
Friendly Alien Monster Pumpkin Stencil
A friendly alien monster pumpkin stencil showing a round-bodied creature with three bulging circular eyes, two small antenna balls on stalks, a wide grinning mouth with pointed fangs, and shaggy textured fur patches on its body and feet. One arm is raised in a wave while the other hangs loosely at its side. Carve the three eye circles early, since they are isolated islands that require intact pumpkin wall around them to stay in place.
Anarchy Symbol Pumpkin Stencil
The classic anarchist circle-A symbol is redrawn with jagged, torn-edge strokes: the central A-frame, the horizontal crossbar, and the enclosing circle are all rendered as rough, splintered shapes that evoke spray-paint or ripped stencil. Each element is a separate cut piece, so when lit the glowing fragments of the circle and letter float against the dark pumpkin wall. Cut the short crossbar piece first since it sits between the two legs of the A and will be the most difficult to free once surrounding cuts are made.
Baby Dragon Pumpkin Stencil
A round-bodied baby dragon with oversized round eyes, stumpy clawed feet, and membrane wings spread to each side crouches in a compact, almost circular composition. The eyes are large pierced circles, the wings are open negative-space shapes with thin bony rib lines left intact, and small spiky horns crown the head. Lit from within, the glowing eyes become the focal point while the wing membranes glow warmly around the solid orange ribs. Carve the large eye circles first so you can verify the round cuts are centered before committing to the surrounding detail cuts.
BOOO Starburst Pumpkin Stencil
A comic-book explosion pumpkin stencil spelling BOOO in large rounded block letters set inside a starburst burst shape, with spiky radiating points around the outside, scattered small five-pointed stars, and two short speed-line slashes shooting upward from the top. The burst background is carved through around the letters, making the BOOO lettering read as solid orange against a glowing field of light. Carve the jagged spike points of the burst last, working from the base of each spike outward to avoid snapping the sharp tips.
English Bulldog Pumpkin Stencil
A stocky English bulldog puppy sits front-facing in this detailed dog pumpkin stencil, its wrinkled forehead, round cheek pouches, upturned nose, and splayed paws all rendered in interlocking cut sections. Large open areas in the chest and outer body frame a web of narrow pumpkin-skin bridges that define the jowls and snout; lit from inside, those bridges glow amber against the dark recesses. Work the tiny nostril dots and cheek-spot circles first with a small drill bit or punch, then carve outward to avoid collapsing those delicate interior pieces.
Badass Pumpkin Stencil
A single-word pumpkin stencil spelling BADASS in wide, chunky block capital letters that span the full face width, with stencil bridge cuts breaking the enclosed counters of the A and the two S letters. All letter interiors are carved through to glow as one continuous horizontal band of text. The double S at the end contains tight letter spacing, carve those two characters last, when the surrounding wall is still fully supported, and use a thin blade to maintain the narrow gap between them.
Black Lives Matter Pumpkin Stencil
A statement text pumpkin stencil spelling BLACK LIVES MATTER in three stacked rows of wide block stencil letters with narrow bridges preserving enclosed letter counters. All letter interiors are carved through to glow, and the thick letterforms stay solid. Because the bottom row MATTER spans nearly the full face width and includes tight letter spacing, carve that row last so the pumpkin wall retains maximum support while you cut the taller upper letters.
Alien in Asteroid Pumpkin Stencil
A baby alien character sits inside a rough oval asteroid, hugging its knees: the alien's large oval head with dark recessed eyes pokes out the top of the rock, tiny three-fingered hands reach forward, and small star-burst shapes float to either side suggesting space debris. The jagged asteroid rim forms the outer boundary of the cut. Lit from inside, the alien face and hands glow within the rocky frame while the star shapes create a scattered secondary light. Cut the alien face details inside the head first before removing the large asteroid-rim opening, so the head structure is supported during the finer cuts.
Siberian Husky Pumpkin Stencil
A Siberian Husky portrait faces three-quarters left: the triangular ears with small interior cuts, the characteristic facial mask rendered as a series of floating light-and-shadow shapes, and the ruff of the collar all break the face into layered islands of pumpkin skin. The large negative circle framing the head creates a medallion effect when lit, and the mask shapes inside glow as warm orange ridges against the dark background. Work from the smallest inner facial shapes outward, leaving the outer framing arc until last so the structure stays rigid while the details are cut.
Alaska Pumpkin Stencil
Alaska's unmistakable outline fills the stencil: the large mainland block with its jagged southeastern panhandle, the scattered Aleutian Island dots strung to the lower left, and the intricately serrated coastline that makes this the most complex state silhouette in the collection. Each island dot and every inlet notch is a separate piece to pierce, giving the lit pumpkin a constellation-like scatter of small glowing holes alongside the main glowing landmass. Cut the main body first, then use a thin detail blade to punch the individual island dots from largest to smallest.
Carbon Element Pumpkin Stencil
A periodic-table tile for carbon (element 6) fills the stencil: a rounded-corner square border frames a large bold letter C with an interior negative crescent carved away, the atomic number 6 in superscript at the upper right, and the word "carbon" in lower-case across the bottom. The border, the C glyph, the numeral, and the text letters are all pierced through. Lit from within, the design reads as a glowing science reference card. Leave the thin horizontal shelf of pumpkin skin between the C body and the "carbon" text block intact until all the letter-O counters in "carbon" are punched out.
It's a Boy Pumpkin Stencil
The phrase "it's a boy" is set in a bold, bubbly hand-lettered script across two lines, with a heart shape centered below the text. Every letter is cut as a solid shape: the rounded strokes of the lowercase letters, including the counter inside the "o" of "boy" and the enclosed loop of the "b," are all part of the carved-away design. Lit from within, the chunky letterforms glow against the pumpkin wall. Cut the enclosed counters of "b" and "o" before removing the main letter bodies so those small interior pieces don't become loose mid-carve.
Geometric Butterfly Pumpkin Stencil
A geometric butterfly pumpkin stencil showing a symmetrical butterfly with four wings divided into bold sections: two large upper wings each containing a full circle and a pointed outer blade shape, and two lower wings each with a scalloped half-circle cutout. A slim segmented body runs down the center axis with small antennae at the top. The large wing sections and the lower scalloped openings glow brightly when lit, while the solid center body and the wing-division lines keep the butterfly shape crisp. Cut the two round upper wing circles first, since they are isolated islands that must be scored from the surrounding wing before anything else is removed.
Pumpkin with Vines Pumpkin Stencil
A jack-o-lantern-within-a-pumpkin stencil showing a grinning carved pumpkin face at the center, surrounded by a flowing arrangement of autumn leaves, curling vines, and a flying bat perched near the stem above. The inner pumpkin face, triangular eyes, jagged mouth, and stem, stays solid orange while the vine-and-leaf background area around it is pierced through to glow. Carve the outer leaf and vine shapes before opening the inner face cuts, so the decorative frame is complete and stable before you work near the center detail.
Boo Ghost Speech Bubble Pumpkin Stencil
A speech-bubble pumpkin stencil showing a ragged, ghostly cloud shape with wispy frayed edges and the word BOO! set in loose, spooky handwritten-style lettering inside the bubble, plus a small speech tail pointing from the lower corner. The cloud outline and the letter interiors are carved through so the whole design glows as a single bright speech burst, while the letterform strokes remain as solid orange bridges. Cut the outer cloud perimeter first as one smooth outline, then open each letter space individually from the center outward to avoid buckling the thin cloud walls.
Cartoon Skeleton Pumpkin Stencil
A cartoon skeleton pumpkin stencil showing a compact, round-headed figure with large circular spiral eyes, a triangular nose, and a wide grinning mouth, with segmented rib-cage and pelvis details on the torso and small round joints connecting the arms, legs, and feet. The eye spirals and scattered body segment cuts all glow independently when lit, creating a playful dotted-light pattern across the jack-o-lantern. Cut the two large eye openings and the crescent mouth before moving to the small scattered rib and limb segments, so the structural head area stays solid while you work the detailed body.
Biden 2024 Pumpkin Stencil
A political text pumpkin stencil spelling BIDEN across the top row in bold block letters and 2024 flanked by two five-pointed stars on the second row, all carved through as glowing cut-outs against the solid pumpkin wall. Enclosed letter counters, the center of the D, both zeros, and the circular interior of the B, require bridge strips to keep them attached. Cut each counter island before removing the surrounding letter body so they do not shift.
Vampire Pumpkin Stencil
A snarling vampire face in three-quarter view fills this hard-difficulty pumpkin stencil, with wild flame-like hair, hollow sunken eye sockets, a sharp cheekbone, and an open fang-lined mouth all cut through as negative space. The remaining solid pumpkin flesh forms the angular features of a classic Dracula visage. Lit from behind, the empty eye sockets and open mouth glow fiercely. Carve the eye sockets and mouth interior before tackling the outer hair flames, so the face stays firmly anchored while you work the thin wispy points.
Frequently asked
- Do I need special tools to carve these?
- A basic carving kit with a serrated saw, a poker, and a scoop covers 95% of pumpkin cutouts. Detailed designs benefit from an X-Acto knife.
- Can kids use these pumpkin cutouts?
- Designs marked Easy or Kids are great for younger carvers with adult supervision. Plastic carving tools are safest.
- Are these pumpkin cutouts free to download?
- Yes — every pumpkin cutout on this page is free. Click the preview to download the PDF.